I've been watching goldsmithing & jewelry making videos and this is the first diamond setting video that I've come across. definitely looking forward to more content.
Do you know more precisely which bronze alloy you have, when I bought a bronze plate myself, it is hard and cuts into crumbs, while your plate cuts beautifully!
@@KaiSimolaHandEngraver this specific one is from jura, he sells them precut. Pretty convenient but expensive if your regularly practicing. Normally i buy a large sheet. And cut by hand with a saw and file square myself. I will attach a link for you - a.aliexpress.com/_EHF0D5X
@@KaiSimolaHandEngraver combination of practice, very well sharpened gravers and correct layout 👍and the face angle normally make also about 60 degrees. I prefer it slightly steeper so it wont break so much.
I bought that same plate, how should the drilling be changed with bronze compared to steel, when the blades break inside the bronze? 1mm and 1,5mm breaks!
I can never get my cuts that shiny and sharp. what angle are you cutting your gravers to and are they c-max gravers or something I don't know about... lol
@ I just found this on AliExpress: ￡5.68 | HRC55 Solid Carbide Round Rod Solid Carbide Round Rod 3mm 4mm 6mm 8mm 10mm 12mm-20mm x100 150 200 330mm TUNGSTEN Bar carbide bar a.aliexpress.com/_EJPWjJP
@@bc_jewellery1 Thank you very much, I have looked at the model from you and tried to make pave planting on steel, it is difficult when there are no quality tools, but I have ordered them, and made some myself
Muchas gracias por compartir la bendición del Padre del Hijo y del Espíritu Santo estén en tu vida y todos los tuyos gracias buen día bendiciones 😅😅😊😊Colombia cristo te bendiga siempre y te sientas feliz recibelo en tu corazón y Espíritu siempre ❤❤
@@drowzzzy1631 great idea, next video i will do it in the description for this one I can’t imagine sorry as it was some time ago and now i changed my set up since
I've been watching goldsmithing & jewelry making videos and this is the first diamond setting video that I've come across. definitely looking forward to more content.
@@Northhh666 well thank you! More on the way. Editing from a phone currently so not ideal takes a long time
I have ADHD and that was the most relaxing thing for my mind to watch.
@@collinsanchez9949 haha i also have adhd. This job is probably the only thing ive ever been able to concentrate on!
Love these videos man, keep them coming!! I'm always happy when your instagram posts come up on my feed. These videos are amazing as well
@@bo0gs729 thank you I appreciate I will try be more active 🙏
Well done👍👌
Look so great man❤
Bravo!!! Amazing work!
Awesome video!! 🙏😎👍
Thanks
very nice 😊
great job🎉
Thank you
Nice work! What size of stones are used here? and which engraving system do you use?
Lindsay style system
@@bc_jewellery1great system I love mine regards John 🇦🇺😎🐈⬛
Hello sir! Could share please what micromotor do you use? It's amazing
At moment its marathon handy eco 600
What's that tool called to sharpen beading tool tip down? Thanks
Its called bevelux u can find on instagram
Do you know more precisely which bronze alloy you have, when I bought a bronze plate myself, it is hard and cuts into crumbs, while your plate cuts beautifully!
@@KaiSimolaHandEngraver this specific one is from jura, he sells them precut. Pretty convenient but expensive if your regularly practicing. Normally i buy a large sheet. And cut by hand with a saw and file square myself. I will attach a link for you -
a.aliexpress.com/_EHF0D5X
@@bc_jewellery1 Thank you!
@@bc_jewellery1 Thank you, I don't understand how you can cut that close to the hole and not have it fall down!
@@KaiSimolaHandEngraver combination of practice, very well sharpened gravers and correct layout 👍and the face angle normally make also about 60 degrees. I prefer it slightly steeper so it wont break so much.
@@bc_jewellery1 Many thanks for the advice, you are a great engraver, and a great man, when you give advice to others, not many people do that!
Awesome. What is the tool you use to push down the stones?
Old beading tool ground flat
@@bc_jewellery1 Just have a follow up question, it looks like it is on a spring pusher? Have you modifyed a spring marker tool?
@@astrico1 no spring
What tool did you use to split the prongs before beading?
1 question : Was it enough to cut the prongs in 2 ? Or the 2nd time when you pressed again ?
Expensive work luxury music
I bought that same plate, how should the drilling be changed with bronze compared to steel, when the blades break inside the bronze? 1mm and 1,5mm breaks!
@@KaiSimolaHandEngraver hello, im not sure i understand your question. I use carbide for everything
Very nice 👍 ❤
Do you think working with a 2x zoom is bad for the eyes?
I spoke to an optician about this. He said the microscope is fine for you eyes zoom dosent matter
@@bc_jewellery1 thanks you 😉🙏
I can never get my cuts that shiny and sharp. what angle are you cutting your gravers to and are they c-max gravers or something I don't know about... lol
@@marcwilliams4188 hello, these are just regular carbide bar stock ground and polished using edenta ceragloss wheels. Here im using 60 degrees
@@bc_jewellery1thanks for the info, can I ask where you are getting the carbide stock?
@@marcwilliams4188 on ali express remind me tomorrow ill find the link
@@bc_jewellery1 did you find the link?
@ I just found this on AliExpress: ￡5.68 | HRC55 Solid Carbide Round Rod Solid Carbide Round Rod 3mm 4mm 6mm 8mm 10mm 12mm-20mm x100 150 200 330mm TUNGSTEN Bar carbide bar
a.aliexpress.com/_EJPWjJP
Hello sir,what kind of metal do you use for the stone splitter
Carbide
At 19:20 you start sharpening a tool to pin a specific shape, what is the process called?
And also what tool are you using to shape it? I’m a noobie. Thanks!
@@marvinlopez5880 the tool is called bevelux find on instagram. This process does not really have a name its just a renewal of an old beadinh tool
Bhai mujhe sikhani h Miro setting.. traning center name btao ..agar surat me koi ho to . please
What is the face angle of your 60 degree blade?
What metal are you setting into??
Bronze
Hi, what graver machine are you using please?
@@rasiahvincent8302 my own machine. More will be released here next year
Bravo,nice work,are you hand pushing your gravers ,or power assist?
Regards JOHN👏👍🇦🇺😎🐈⬛
@@johnjewell219 power assisted
Hi, can I ask what the blade angle is in that cut?
@@KaiSimolaHandEngraver 60 degrees
@@bc_jewellery1 Thank you very much, I have looked at the model from you and tried to make pave planting on steel, it is difficult when there are no quality tools, but I have ordered them, and made some myself
@@KaiSimolaHandEngraver always better to make yourself. Preshape = waste of money
Hello Sir: May I ask what microscope you are using here?
Am scope
What is the thickness of the metal ?
@@akilkhan17 2mm
😂@@bc_jewellery1
What is the diameter of the stones?
@@KaiSimolaHandEngraver i think they were 1.5mm
Muchas gracias por compartir la bendición del Padre del Hijo y del Espíritu Santo estén en tu vida y todos los tuyos gracias buen día bendiciones 😅😅😊😊Colombia cristo te bendiga siempre y te sientas feliz recibelo en tu corazón y Espíritu siempre ❤❤
Divider the prongs always made me mad😂😂😂
Bro what is that metal?
@@liuberlaffita1539 bronze
what’s the material for this plate?
Phosphor bronze
Too clean 😂
Learn to you
Very cool
What's that thing you're using to push the diamonds down the only pushers I can't find are sqaure and big
@@drowzzzy1631 grind it myself with diamond wheels from brand edenta they go in the pendant or micromotor
Do me a favor can you name every tool used in this video? With description of each type
@@drowzzzy1631 great idea, next video i will do it in the description for this one I can’t imagine sorry as it was some time ago and now i changed my set up since