Lavender Pink Diamond Micro Pavé Ring
HTML-код
- Опубликовано: 23 мар 2018
- In the video you see Niels van Dooren setting Lavender pink coloured diamonds each measuring 1.3mm. The ring is white gold and was first printed on a Form2 printer and later casted.
Visit: www.vandoorendiamonds.com
Music:
I need to start writing things down - Chris Zabriskie
Midsummer nights dream - Mendelssohn
Danse Macabre - Kevin MacLeod
Drone in D - Kevin Macleod
Niels, no solo nos muestras un excelente y preciso trabajo sino que además aportas información extra en los comentarios. Personalmente intento aplicar a mi aprendizaje, muchas gracias, eres admirable!
millionmilesman Gracias para dejar esta mensage ! Buon dia!
vandoorenniels:
Gracias a Vd. he leído en otro comentario que practica el engastado desde hace 3,5 años, supongo que también hace Vd las piezas, es decir, que es joyero además.
I have seen many video and I can tell that your one is the best or the 2nd best I have seen !
You showed all part of the pave setting work so well ! That was amazing 🤩, we can really see what kind of work is required !!!
Thanks you 👏
Absolutely stunning!
TheGrandFanelli thanks for the reply!
Wow! Your videos are amazing!!! Thank you for sharing. 😃
Beautiful work and ring. 😊
Thanks!
Hi vandoorennels thanks for taking the time to answer mi questions.
José Linares de nada
Magnifique , j'adore vos méthodes de sertissage
Laftas Reda merci pour votre commentaire
Excellent work I see you are very meticulous when you do your work, that’s what makes it look beautiful
Thanks Julio for taking the time to comment
Just magnificent!
Thanks Eduardo for your comment! ;-)
Who ever got this ring is very lucky. IT'S SO BEAUTIFUL
Thanks Karen for your comment!
Magnifique stupéfiant époustouflant très beaux grand bravo vraiment grand merci
Amani il etait un traivail beau !! Merci
nice job very talent master greetings from Sydney
Shant Kevorkian thanks for your comment !
I love when the holes get bigger. And of course the gems setting
Liam Jones thanks and the slow upscaling of the holes is a crucial part of the micro setting
vandoorenniels is that so you don't go too big? I noticed not every diamond fit in every hole.
Liam Jones yes, the diamonds vary a tiny bit and are therefore all drilled a bit smaller than the actual size to make sure it will fot
vandoorenniels thank you very much for your reply. Your work is a pleasure to watch. I am going to make my own wedding ring with sterling silver and a wood inlay.
@@heinikendude actually you mainly do this so that each hole has the same distance inbetween each other. holes should be bigger than the stones ex. 1.15-1.19mm stones have a hole of 1.2mm
😊masterpiece😊
Thanks!
Awesome!
Carianin 52 thanks !
I cannot wait to go on my setters course in the new year
Have fun !
lindo trabalho , explendido !
robbike gracias amigo
Imponente, maravillosa obra, tiene todo el talento del universo 💍✔️❗❗❗❗❗❗
Thanks for your comment Jairo, make sure to follow our channel ;-)
Show ficou magnífico
Gracias
Todo Un arté impecable y delicado trabajo
Muchas gracias !
Mis respetos maestro toda una obra de arte hecho en joya
Muchas gracias amigo !
Thank you for the videos or I am a Indian micro sater this video big help and thank you thank you thank you thank you thank you thank you
King Maker Soumen thank for your comment. Good to hear ! Good luck training in India
Wow!
Campro Nos gracias !
Does you microscope has a video out or what camera and lense do you use to get the close up?
José Linares I use a magnification lens and a separate simple Sony camrecorder.
Nice
👍👍👍
As a Goldsmith I have upgraded to pneumatic tools and diamond sharpening for setting but am trying to figure out if I can sharpen and use carbide tools without the health hazard associated with the dust. Maybe do sharpening in a separate area, I do not think this issue has been dealt with adequately.
quail333 good question. I’m about to purchase a specific vacuum equipment for this purpose.
explendido
Thanks man!
Hi! Amazing work! Can i ask the diameter of wire used for the ring? and the size round graver you use for carving out the pave setting? thank you
Niamh Manley Hi, and thanks for your question. The ring was 3D designer and printed on a form 2 printed. The width of the wire is 1,5 mm. Diamonds are 1,30-1,35. All gravers are sharpened by myself so there is no real size. ;-)
gracias por permitirme
conocer su trabajo ya que dado y dar a conoser este arte a personas como yo aprendi si tener un instructor
Hi Niels, great video! What do you use to hold the diamond to the beading tool when you insert it into the setting? Again great video...Thanks!
JF McAlister water. Simple matter of adhesion on the table of the diamond
thank you!
9@@heinikendude
it was cool
Thanks Maks
How do you know how far to space your calipers to get an exact amount of diamonds to fill the space?
Roy Aaron thanks for asking. I know measure the exact diamond diameter and then just filll up the whole strip with it. The small filet cuts at the side gave me some space to fill a possible gap.
Hi. What microscope you use? And what magnification to be able to set stones.
Emil Diaco I use a Meij microscope from Japan
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
H Mar thanks !
Hello what type of steel do you use to make your tools and what is the polisher that you use for the tools?
93Vulture polisher is diamond disk. And steel is mostly carbide
Hi, thanks for the video.. very helpful. I was wondering if you use a pneumatic tool like GRS Gravermach to cut and cleanup in the end or just do it free hand?
access hi, its a pneumatic tool. The splitting of the prongs is done manual.
Hi Nils, is de Jura divider beter dan de Alexander divider? Hoe is de kwaliteit kwa elektronica van de Jura, vergelijkbaar met een Mitutoyo ?
Awesome job do you live in the USA,how long have you been setting diamonds ?
José Linares hi, I live in Europe. Belgium more precise. Been setting diamonds for approx 3,5 years now
What kind of bur are you using to cut the side scallops at around 7minute 40 seconds?
This is a tapered bur 0.7 mm ;-)
Whats the name of instrument,,which has ring is fix for setting..plz sir..lv frm india
Adamsın süper ıdee pergel yerıne mıkrometer 👍😎
สวยครับ
parn น English please ;-)
gracias por permitir conocer su trabajo y trasmitir su conocimiento a personas como yo que no tuve un maestro
What is that measuring tool called , were you marked precisely
naveen kumar that’s a divider. Check out juratools.com
vandoorenniels thanks , and nice work from you , i love your designs ,
whats a good price to pay for 100-1mm preset prong setting🤔
Dear Jason, if you email me at info@vandoorendiamonds.com I can give you more info
can you please tell me what the device is called holding the ring
This is a special fixture made by JuraTools. Check them out!
How much does this ring retail for just out of curiosity?
Mazurat unfortunately this info we will not share in public. you can send an email to info@vandoorendiamonds.com to get a quote.
What is the name of the tip in 15 min plz
bug bunny™ leonardo that would be a tapered bur ;-)
Plz.. sir show me
..(presar setting)..in Gold.metal
Hi Gyana, wjhat do you mean by presar setting?
Dada tomar kacha ai kaj to hoy mayko ami kaj korbo naban
Hi My friend english please?
поставить камни вообще не вопрос, как сделать такое кольцо?)
Александр Широков sorry i cant translate. English please ?
diamonds fasten easily, make a ring difficult
Вырезать из восковки и отлить. Как раз сделать такое кольцо не проблема, а вот камни поставить...
是
English please? ;-)
Camera Very shaky
Hi C,
Trying to improve my recording skills
lindo trabalho , explendido !
robbike thanks for your comment
Nice
Thanks Amir
lindo trabalho , explendido !
Thanks!
lindo trabalho , explendido !
Many Thanks!