Couldn't you connect the generator direct into the board, to use the "prevent discharge" feature for the battery? Or too much current for the little TP4056 deal with?
@rajeshlee764 it could kill you! Depending on voltage and if the current is for example 1 amp? It can send your heart out of rythym ? Defibrillator would have to knock it back.
@@dragan3290 nonsense do you think Aliexpress sells high-voltage generators that can kill you if that were the case there would already be dead people all over the place young people who, for example, would have done anything with them
It's just cyanoacrylate glue, any super glue. The spray is just water. Maybe it's deionized to prevent short circuit. Plain air humidity is what "hardens" the glue. Any base like sodium bicarbonate can also accelerate but you would have ions in water. Not good for the circuit or you handling it.
hello, can you tell me where to buy this high voltage module. I already have an 18v taser but it no longer works. Thank you in advance, for info continue your videos, they are very cool.
Thank you for the kind words my Friend, but you have to be careful with this module because the output voltage can reach up to 200kV!!! This is very Dangerous⚠️ s.click.aliexpress.com/e/_EQ04sST
@@vladnini22no, If you're going to be a defender, it doesn't matter if you're the aggressor, you'll die or not, even though the leg and 3 seconds wouldn't kill you.
Its not just a capacitor, there are other components inside the housing and there are two versions in this style that I know, one that boosts is advertised to boost the voltage to 400 kv volts and another to boost it to 1000 kv. There are some other designs that are less powerful.
that small button is actually limiting that modules output capacity, put a bigger push button or put a switch, I made mine with that same small push button and it was weaker as to when I attached a rocker switch and a big button. made 3 of these already with 400kv and the 1000kv versions, they're not true rated they're mostly like 30kv-80kv. now I'm curious to upgrade mines with these capacitors XD
@@felixcesarzuniga8066 it's literally just 3 components to build this taser, 1st. the taser module either 400kv or 1000kv ones (they're not true rated but 1000kv is much more painful than 400kv component) 2nd. your battery must not exceed 6v, any battery will do but an 18650 will suffice. 3rd. your switch to turn the taser on and off, preferably 2 switches so you can have a safety switch so you don't accidentally set it on in your pocket (which I have done, hence why I know why the 1000kv one is painful) optional: buy a tp4056 charging module to charge the battery, I would also suggest buying a 18650 battery holder, for the 1 battery so you don't have to solder the wires on the battery itself, that is bad because heat of the solder will kill the battery capacity. that's all. it's up to you on how you will assemble it, use wires that are not thin cus the battey will need to deliver many amps to the taser module, becareful when wiring the module because the taser module has a positive and negative poles. I highly suggest watching youtube tutorials about making a taser module similar to this one.
Whoa, this sounds dangerous but interesting! Just out of curiosity, does it work on all devices or only certain ones? Definitely something to be cautious with.
hello, i have a sick idea. could i replace your 400kv generator with my mosquito repellent racket? i would like to remove the original racket circuit and install the 400kv, could it work? or would it be dangerous? thanks
@@pamelapelosi9225Lo que mata no es la tensión (voltios) mata la corriente (amperios) Cualquier corriente inferior a 30mA es segura y no te matara, independientemente del voltaje. Este dispositivo tiene mucha tensión pero muy poca corriente. Quizás 5mA...
Can you make a step by step video on how to make this device and what materials are needed. Thanks. This looks like a cool science project that could get me in a grade.
yes. I have made several different versions of this in the past using a flashlight that I gutted to house everything and used a European style male plug adapter for the contacts. Looks and works great.
I need help anyone expert please help me I m having problem after connecting all the parts teaser only sounds like beep and removing all parts it's works weak and many times charging module is also get too much heated I change connection many times still some of these problems starts can you help me 😊
Yo no se la gente que le tiene miedo a hacer las cosas bien. Ese cargador tiene un conector para la bateria y otro para la salida de voltaje, tendrias que haber usado ese para evitar descargar la bateria mucho. En las baterias no hay que soldar con estaño, hay que hacerle soldadura de punto con tiras de niquel y si en vez de pegarlo todo hubieras hecho una carcasa en 3d con una tapita para los clavos ya vamos, para alucinar
@@felixcesarzuniga8066 si pones en Aliexpress multiplicador de voltaje, ya te aparecen varios, cualquiera vale, el condensador, se ve la numeración, puedes buscarla y tendrás el valor y el cargador, también, hay muchos en Aliexpress y todos sirven. Sólo que hay unos mejores que otros, en el caso del video, usa uno de los buenos, pero por como lo usa, es como el malo. La diferencia es que el bueno, la salida de voltaje está separada de la bateria y la proteje de cortocircuitos, sobrecorrientes, descargarla demasiado… y el malo no, el malo la conexión de la batería es la misma salida
I think you should use more glue at 2.55min, it's a bit lacking lol Honestly, I really don't see the point of using glue since you've welded just before, so glue is useless
There is no good reason for this to exist. It is illegal in many countries and it speaks volumes about the people who enthusiastically comment below..... but nothing good.
The battery would lose power fast with a high discharge, and you couldn't charge it like that. That's the first thing that comes to mind, but the rest is beyond me. 😅
![7 SIMPLE INVENTIONS [NEW]](http://i.ytimg.com/vi/ggf_JjlOnNI/mqdefault.jpg)
Very good, However, for defense, the first contact would break the electrodes, putting Durapox around the electrodes would even help with resistance!
The way you solder was so smooth!!
What kind of glue is that? And what do you spray on it to instantly make it hard?
I used Miter Apel two component adhesive
@@ErCanEverythinghi is that like an araldite but thinner? Being 2 part and drys quickly like CA glue? Any reply appreciated cheers
@@dragan3290 I use Miter-Apel or Akfix 705 two part glue (with spray hardener)
@@ErCanEverythingwhat is the name of that black device u used .
Me podrian regalar el nombre de cada elemento que usó muchas gracias
Couldn't you connect the generator direct into the board, to use the "prevent discharge" feature for the battery? Or too much current for the little TP4056 deal with?
What happened if we put our finger in this
@rajeshlee764 it could kill you! Depending on voltage and if the current is for example 1 amp? It can send your heart out of rythym ? Defibrillator would have to knock it back.
@@dragan3290 nonsense do you think Aliexpress sells high-voltage generators that can kill you if that were the case there would already be dead people all over the place young people who, for example, would have done anything with them
Điện Cao áp rất thú vị xin cảm ơn đã chia sẻ với khán giả
Good device😅 I've had it for a few years and use it to deter dogs that run at me when I'm cycling😅
And my dog, hearing it, looks for a place to hide😄
@@ErCanEverythingcan It be used for self defence against thieves/attackers?
@electroboom right up your street
I was thinking of just the same then I saw your comment 😂 nice.
@@ErCanEverythingwhat is that green battery
What kind of spray is that and how does it cure glue so fast?
This is a two-component adhesive "Mitre Apel" and they are sold with the spray together, but this spray also works on the super glues.
@@ErCanEverything can you put a link i get it from amazon
@timiditta70 This is the glue I use, but as I see, they are not sold on Amazon at the moment.
a.co/d/buK62JQ
@@ErCanEverything Is there something similar on amazon?
It's just cyanoacrylate glue, any super glue. The spray is just water. Maybe it's deionized to prevent short circuit. Plain air humidity is what "hardens" the glue. Any base like sodium bicarbonate can also accelerate but you would have ions in water. Not good for the circuit or you handling it.
Can this be used to power an inverter...?
hello, can you tell me where to buy this high voltage module. I already have an 18v taser but it no longer works. Thank you in advance, for info continue your videos, they are very cool.
Thank you for the kind words my Friend, but you have to be careful with this module because the output voltage can reach up to 200kV!!! This is very Dangerous⚠️
s.click.aliexpress.com/e/_EQ04sST
@@ErCanEverythingthat 200 kV can kill a person if I use it into his high part of the leg for 2-3 seconds?
That comment got you on a watchlist i can tell you that much @@vladnini22
@@vladnini22no, If you're going to be a defender, it doesn't matter if you're the aggressor, you'll die or not, even though the leg and 3 seconds wouldn't kill you.
Aliexpress
Que es el tubo negro donde pegaste la batería ?
Преобразователь высокого напряжения
Es un modulo de alto voltaje
Boost convertor
What is that black box?
😂😂😂😂
@roby5075 it's a Boeing 737 Recorder
Perhaps from word war II
Hv generator u can find it online
Un elevador de tencion
can you tell what are the things you used
looks like just a female usbc charging port battery piece of plastic to hold it then just some wire and
nail
It's a voltage booster brother
@@bleepbloIt's a high voltage transformer my guy
Can you connect by this two metals?
You can also DIY a ZVS circuit. Then you can connect it to a step up transformer for 10 kilo voltes of voltage
Can you tell me why this step transformer is not working as much good as it is working in first time
what kind of battery is it? how many V and mAh
It’s 18650 battery
18650 3,7V
3:20 what is the name of this glue? Tell me please. first time I see this. why pshikalka?
Two-component adhesive Mitre Apel
what is the very first detail?
It is very frustrating that they mostly do not say what they are making and parys detail mostly lacking
Can an high voltage emitter function to at least momentarily disable a car?
Wao..! Thanks You for That and That Good, Number One. Have a Good Nice Day And Good Luck Ok My Friends..❤❤❤❤❤
What is the value & voltage of super capacitor? Please reply, I want to make this for cigeratte lighter
1600V, para más información solo busque su inscripción, 682j1600v
What is name of circuit that he used ? 4:08
TP4056 charging module
What's the black component name?
How long does the battery last in a full charge ?
360days
What are the parts and wires needed to make this?
Moduł do ładowania( ja wyciągnąłem z słuchawek typu air pods) . Przetwornica wysokiego napięcia, Akumulatorek 18650. I przycisk
@@Jab0l3Q какое напряжение на выходе?
Donde compro los materiales ?😮😮
Temu…
I like it . Thanks for you and Good Luck and Happiness OK My Friend ❤❤❤❤
Thank you my Friend🙏🙂🤝🤝🤝
@@ErCanEverythingplease sir ,give material name in description
4000kv components name please or whare in pcb or externals??
Found in Electronic electric device or Machinery?? 6:17
Is this can kill someone or dangers?
what is the value of capacitor...?
Its not just a capacitor, there are other components inside the housing and there are two versions in this style that I know, one that boosts is advertised to boost the voltage to 400 kv volts and another to boost it to 1000 kv. There are some other designs that are less powerful.
@@vanhattfield8292 ma non uccidono 400kv?
that small button is actually limiting that modules output capacity, put a bigger push button or put a switch, I made mine with that same small push button and it was weaker as to when I attached a rocker switch and a big button. made 3 of these already with 400kv and the 1000kv versions, they're not true rated they're mostly like 30kv-80kv.
now I'm curious to upgrade mines with these capacitors XD
laugh!
Por favor dime todos los materiales que usaste completos, aquí no lo ponen por favor
@@felixcesarzuniga8066 it's literally just 3 components to build this taser,
1st. the taser module either 400kv or 1000kv ones (they're not true rated but 1000kv is much more painful than 400kv component)
2nd. your battery must not exceed 6v, any battery will do but an 18650 will suffice.
3rd. your switch to turn the taser on and off, preferably 2 switches so you can have a safety switch so you don't accidentally set it on in your pocket (which I have done, hence why I know why the 1000kv one is painful)
optional:
buy a tp4056 charging module to charge the battery, I would also suggest buying a 18650 battery holder, for the 1 battery so you don't have to solder the wires on the battery itself, that is bad because heat of the solder will kill the battery capacity.
that's all. it's up to you on how you will assemble it, use wires that are not thin cus the battey will need to deliver many amps to the taser module, becareful when wiring the module because the taser module has a positive and negative poles.
I highly suggest watching youtube tutorials about making a taser module similar to this one.
@@dranreb.june.cubelo2735sorry where can i buy the 1000 one
What's super glue is he using?
Miter Apel two component adhesive
This is killer Brother 👍
What is the name of that black component ?
That's just a rod cover with plastic
It's called a taser module or high voltage generator
What are the tools used?
Please check description of the video
Where can I get those batteries
It would be much more useful if you could accompany your designs with circuit diagrams. Please consider doing so.
Where can i get a charger module and that type of battery pls help
you can find it online
Que componentes se usan
Whoa, this sounds dangerous but interesting! Just out of curiosity, does it work on all devices or only certain ones? Definitely something to be cautious with.
all
What it is called the black one?
High voltage module
hello, i have a sick idea.
could i replace your 400kv generator with my mosquito repellent racket?
i would like to remove the original racket circuit and install the 400kv, could it work? or would it be dangerous?
thanks
yes you can but the spark will be much less strong since it is a less powerful pier
Can it be use as taser
Yes
@@asekaa-wd5ge ma non uccidono 400kv?
@@pamelapelosi9225Lo que mata no es la tensión (voltios) mata la corriente (amperios)
Cualquier corriente inferior a 30mA es segura y no te matara, independientemente del voltaje.
Este dispositivo tiene mucha tensión pero muy poca corriente. Quizás 5mA...
Capasitor link please
Can u tell me the object that u used first
what battery did you use in this
Lithium 3.7v
Apakah modul step up generator ini akan awet untuk penggunaan jangka panjang?
itu nama barang yang dibawah batre namanya apa bang?
is it dangerous vs people?
Can you make a step by step video on how to make this device and what materials are needed. Thanks. This looks like a cool science project that could get me in a grade.
Good project, how can I buy this high voltage circuit?
What’s name?
?
No obligatory grape zapping!
Can it be used as self defence device?
yes. I have made several different versions of this in the past using a flashlight that I gutted to house everything and used a European style male plug adapter for the contacts. Looks and works great.
@@vanhattfield8292 what is the very first detail?
I need help anyone expert please help me I m having problem after connecting all the parts teaser only sounds like beep and removing all parts it's works weak and many times charging module is also get too much heated I change connection many times still some of these problems starts can you help me 😊
Capesitar ka name kya hai
What is that black things
Yo no se la gente que le tiene miedo a hacer las cosas bien. Ese cargador tiene un conector para la bateria y otro para la salida de voltaje, tendrias que haber usado ese para evitar descargar la bateria mucho. En las baterias no hay que soldar con estaño, hay que hacerle soldadura de punto con tiras de niquel y si en vez de pegarlo todo hubieras hecho una carcasa en 3d con una tapita para los clavos ya vamos, para alucinar
Aquí no ponen los materiales, que materiales debería usar para hacer uno mejor por favor?
@@felixcesarzuniga8066 si pones en Aliexpress multiplicador de voltaje, ya te aparecen varios, cualquiera vale, el condensador, se ve la numeración, puedes buscarla y tendrás el valor y el cargador, también, hay muchos en Aliexpress y todos sirven. Sólo que hay unos mejores que otros, en el caso del video, usa uno de los buenos, pero por como lo usa, es como el malo. La diferencia es que el bueno, la salida de voltaje está separada de la bateria y la proteje de cortocircuitos, sobrecorrientes, descargarla demasiado… y el malo no, el malo la conexión de la batería es la misma salida
I think you should use more glue at 2.55min, it's a bit lacking lol
Honestly, I really don't see the point of using glue since you've welded just before, so glue is useless
And here we have a DIY tazer Jailstyle😂😂😂😂😂
hello guy. Have code in arduino ?, if there i want to know it
non sarebbe mortale 400kv?
In before ElectroBOOM does this...
bạn ơi lắp thêm tụ 600v nó mạnh hơn đấy
Wow! What a shocking device
Zbuduj głośnik w szklance
Taser be like
Bro this is very wrong at least you can describe the material details
Получится плджечь сигарету?
man really gone and soldered straight to li ion battery 😭😔
And didn't even use the usb charger built in bms😭🙏
what is this name
The black box is high voltage generator
But it didnt kill any usb device.
U can put a USB c connector on it I think
but it will kill your ass
This is interesting 😮
You sure do like CA glue.
Kv??
süper
How many times did you ZAP yourself making this video?
This device is for saboteurs. It can be used to fry relays in motor vehicles. One day they may attract a 10 year hard labor penalty for possession.
High voltage + house = no brown out
👍👍👍😊👍
What is the name of this device?
Check description👇🙂
good video bro
❤❤❤
new project incoming...
this is basically a taser lmao
i need one pls send one to my location
🤣
which types of battery you used?
3.7v rechargable battery
👍👍👍
😍😍😍👍😂😂😅😅😅
Battery voltage
This black tube no good work at Amazon 10$, and Ali Express 1,50$.
JUST ADVERTISEMENT, SCAM.
🤣😵💫👾💓
Nice. Lol
i will watch leter
Anh
God😂
l
There is no good reason for this to exist. It is illegal in many countries and it speaks volumes about the people who enthusiastically comment below..... but nothing good.
Only those who have no discipline believe this😂
The battery would lose power fast with a high discharge, and you couldn't charge it like that. That's the first thing that comes to mind, but the rest is beyond me. 😅
@@Michael-bc2gb Generator uses 4A of current, it would last long...
Works🎉 Thanks!
Is this can kill someone or dangers?
@derstille463 🤦