How To Clean An Oxygen Sensor
HTML-код
- Опубликовано: 7 сен 2024
- How to clean old and contaminated lambda sensor with ultrasonic cleaner.
Cleaning solution is made of kitchen de-greaser, dish washing detergent and water. After cleaning with this solution repeat the process with clean distilled water.
That’s the same noise that comes out of my sisters room
@sunDried fish 🤣🤣
Hahaha 😂
You are a nut! Lol
@sunDried fish dayum that is funny!
Hahaha
my ears are clean now too lol. cool vid
same
😅
Melvin Birch me too
I got Ear Raped
My whole house is clean too. Damn surround sound system did it!
You're a man of few words!
Actually none
🤣😂🤣👍
He speaks at a higher freqency >30khz
I soaked it in injector cleaner overnight and sprayed it with carb cleaner and it worked. This machine is cool, though.
Basically this method may work. But if you think about how such an O2-Sensor is structured you may think twice. Inside there´s a Circon-Dioxyde-Ceramic with really thin platinum-contactors (these two components bulid the sensor-cell), and high-frequency-vibrations can damage or destroy that ceramic. Trust me, at work I have to deal with such sensors almost every day - and I´m not working as a car-mechanic.
Think what happens to those contractors when the car does 5000 rpm... They are strong in O2 sensors
@daddyhennessy cannonburg you know the difference betwen high and low frequency?
That's why you utilize the plastic tray that ultrasonic cleaners usually come with, a person should avoid the metal on metal vibration with these.
Hey man, what do you think of cheap chinese o2 Sensors?
Do you guy's ever get mad and break stuff? I'm talking about, flipping the fuck out and screaming while smashing the fuck out of everything with a hammer? I like pumpkins!
The hardest part of doing an O2 sensor is getting it off the car. Chuck the old one in the trash and put in a new one then be done with the job. You could do all that work cleaning it only to find out it's still bad
Best way
Came out like butter after warming up the vehicle.
@A L You can find aftermarket onces for 50€ new.
I would agree but when an E92 Nox sensor is £400 before fitting, trying the £20 option is well worth it.
On top of them being expensive. So.e people resort to this to try to save money. Also going to a junk yard can pay off as well some times.
Took out my O2 sensor and gave it this treatment. The gunk that came out was pretty surprising. Ran it for about 15 minutes, rinsed with alcohol, allowed to dry, reinstalled. Crossover rate certainly improved, but I still think it's reading slightly off (could be my MAF as well.. or maybe someone did a tune to the car... or I have a tiny leak somewhere... so many possibilities).
New O2 sensor coming tomorrow... will have to see how it goes. Worst case - I have a spare O2 sensor :p (I already have five spare coils).
Did you replace with a new O2 sensor? I'm thinking about trying this.
I did, the new read just the same as the old. Throttle body bolt was loose ;-) I actually just found that out today... all of a half hour ago (I have the intake off, cleaning everything up, doing the PCV system, timing belt, etc.).
Nice, that is promising. Guess I will have to order one of these ultrasonic cleaners.
Czyli gówno dało, to tak samo jak ludzie, którzy obwiniają swoje rządy i przeciw nim protestują bez sensu, zamiast pogonić rotszylda .. klasyczny brak zrozumienie przyczyny problemu
Change solution to Chemtool and vibrate it then spray off with brake clean! Wipe dry and reinstall.
gonna be honest with you, nobody that came to this video has that thing.
nachosNapples i have :)
:-)
me to.
you're the only person that doesn't have one. you probably feel pretty ridiculous for your comment now, don't you?
nachosNapples I had 2 of these... harbor freight and a branson
brake cleaner works just as well, without making you deaf. As long as you have the top sensor out might as well spray some cleaner in the sensor hole to clean out your CAT as well.
I use personal lubricant sometimes when I feel like getting lubed up. Brake cleaner is not good for your skin. Just remember that next time.
I took your advice but now I'm at the vet and my cat's dead. They're taking about calling the police on me now because I told them I sprayed brake clean in his hole.
to stonekold: and what cleaner would you suggest to clean out the CAT ?
Oh, I thought this was a crock pot. The wife is gonna be upset (again).
I hear this exact noice coming from my grandma's room she hasn't drove a car in 30yrs
Things that make 'ya go... buuuuhh.
There are something’s I can’t unread... Really!,,,, Grandma. OMG...
Gostei do seu trabalho, realmente isto deixa o instrumento bem limpo sem causar nenhum dano. Thanks.
i want to see catalytic converter getting cleaned by this lol.
Me to
I def wanna see that too 😂
Thanks 👍
From Nick Ayivor from London England UK 🇬🇧
That humming sound reminds me of some toys that adults play with... ;-)
James Mcknight well now u made me think . And I can’t stop thinking about now lol
Yes I agree, I still play with a AM receiver radio and it very much reminds me of tuning through the static to find my favorite classical station.
You have to move the metal part around once in a while (~every 15-30s) or you'll have a hole in your tank.
That's why they come with plastic trays, you're right you should try to avoid metal on metal in an ultrasonic cleaner.
you are the good teacher
I have an 35/50 ultrasonic cleaner to what fluid did you use to clean this oxygen/lambda sensor with?
Very good master
02 sensors should never be contaminated with anything as they are extremely sensitive to poisoning with microscopical traces of silicone, shuphur, lead, grease and ultrasonic waves could damage the molecular layers of active metals.
Yes. I once masterbated to some pictures I saw on the internet and I agree.
dude, they are exposed to exhaust! All elements you said (except silicone) are going through it every second!
@@ArminYekkalam I am exposed to those elements when I masterbate? It's not like I use motor oil as lube. No No. Only time I'm exposed is when I expose myself in front of the window. I have an elderly woman next door. She's hot! Only problem is she has cataracts....
@@ArminYekkalam why arent you answering me? Jeez! All I ever did was love you! thats it! My anus is yours. nobody elses!
microscopical .....aka microscopic
Que lo limpié y que funcione son dos cosas diferentes. (Tenía que colocarlo en algún vehículo y ver si funcionaba).
Need to ask after you clean with ULTRA SONIC cleaning, your O sensor can last how long...
$26.90 for thy TYQ-9050 ultrasonic cleaner.
got to have a good bath, a lot of elcheapo brands aren't really ultra sonic, just heavy vibe at a low resonance. wont fix O2 heater element fault code though.
And after all the BS you still need to buy an O2 sensor.
For as little as 12 bucks
@@paulloper8333 more like $80 from a auto store
@@paulloper8333 My up is 188 bucks and down is 55.
@@maxrockatansky1981 Try autodoc, for my e46 bmw the regular price was 90, autodoc 12.
Nox sensor costs , to my vw touran 500 dollars :(
I used my thermal imagery from my scope ind infared printer setup to see that the lining of my inner sensor was infected with the nonwork onda car disease. Now I bring out my thinner like u got there, used it and bam! Nice it works now!
Not bad, The sonic cleaner is about $40. Good Vid!
Hi, can you please tell me exactly with Cleaning solution have you used, i need a product name.
Thanks a lot.
Aris degras and water
Thate is cla clwor
Mmmmm - fresh cup of Carbon Coffee comin right up!
O2 sensor: $54.00
Vibrator machine: $1,799
No thanks
Ch4rly Zx6 .... ... more like $150-500...dental lab, & jewelers supply
John ______ it's a joke dumbass
Ch4rly Zx6 omg what a joke I almost believe it good one man
Ultrasonic cleaner about $80 at Harbor Freight.
Ch4rly Zx6 😂😂
that is amazing! it comes out of the bath as if it just came out of the box!
Wow that's bizarre! First time I see one of those machines in action
It's just a sonic cleaner. Uses high frequency sound to vibrate whatever is in tub, anything like dirt will be vibrated off of the body of part that's in tub.
@@Shadoefax760 I forgot about this comment. It's been 3 years lol
@@ErickMartinSucre lol I know
toyota yaris 2004 engine light on what should i do clean or replace lambda thanks
I changed the old one and I am keeping the old one to clean it in my ultrasonic
jack daniels with horseradish sauce works just fine
Lol
Jesus That's The Sound Of Aliens Invading XD. Then I See The Sisters Room Comment 😂😂
Or ... put it in a cup of lemon juice overnight (quieter)
Yep, lemon juice, vinegar... Even petrol. After all it's a cleaning operation nothing more. ;-)
Oven cleaner ..Mr Muscle ...Brake cleaner are good for kind of stuff .Household vinegar is great too.
That was so satisfying to watch
И в помойку. Чистеньким.
The Flash: let me vibrate your O2 sensor.
Dr. Strange: time stone will work perfect on your car.
Nice
If your oxygen sensor is that old... Buy a new one.
i cleaned the o2 sensor in my old banger - 300k kms original with a brass wire wheel - it worked.
Hey you wouldn't trade the wife for a new one , once she started backfiring would ya
@@gedman9527 Point. But I've learned after 260K miles... I'm just buying a new one. And hopefully it lasts another 200k miles.
@@looplu wow some miles , ya defo getting value for money 👍👍
THE HYPNOTOAD
ALL GLORY TO THE HYPNOTOAD
MrDICKHEAD28 🐸
My thoughts exactly!
MrDICKHEAD28 kkkkkkkkkkkkkk 👏🏻👏🏻👏🏻👏🏻👏🏻
Yes!!!
O.K., if my sensor is reading bad does this help? Doesn’t it go bad internally?
Have saved hundreds of dollars with a little rust remover, ie phosphoric acid solution, spend the money on better gas to reduce fouling.
oh yeah a word of advice to all, a clean sensor does not guarantee it will work. Test it, verify first whether it is narrow or wide band. Test heater and observe rich/lean response
NOW after cleaning it dose it work - because then we would know if it works and is the same one you used
What cleaning solvent did you use ?
KY jelly
@@ezequielgarcia8565 "great"... So that is used for your mother as well. Good lock for your mother and for you using your KY cream....
I used fresh urine as a cleaner and it seemed to work quite well. I use my urine for all types of different applications.
😂😂😂
Do you drink it tho?
@@colbylux-hale5561 Yes. It's refreshing on a sunny afternoon. Especially urine that has fermented in a plastic jug for a couple weeks. Yum! That smell is wonderful.
@@colbylux-hale5561 it's also an aphrodisiac. Just try it. Multipurpose bodily fluid.
@@mr.iforgot3062 I have seen it done recently and I think I will leave that to them but just goes to show you.
Wau ..!!!! ESO FUE ESPECTACULAR ..!!!!😉😉💲😉💲💲😉
Mi amor
if you see black carbon AT the end of your tale pipe does that mean it's your 02 sensor goin bad
It can be the O2 sensor or NOT. What the black pipe indicate is a overly rich mixture on the tail pipe end. (period) Nothing more, nothing less.
Now the reasons can be many and sometimes even countersense one's. Like a very common intake leak, allowing more air in! Which supposedly should lean the mixture. But the problem is rich mix you might say! ;-)
Well the mix is in fact lean, the O2 sensor pick up that reading and tell the ECU to dump more fuel to "compensate". Result rich mix and a black pipe!
DO NO be so hasty judging mechanical failures. That's the ideal method to break your wallet and don't get the expected results. ;-)
Carb cleaner, and a small steel brush will do the job.
so what does this do exactly? does it cure a bad o2 sensor or are you just messing around with it?
Ya. I got one.
What is it??
It's a patented Dragan technology but works only on Zastava
Propane torch is faster and cleans better
what solution did you use for that?
Looks like Russian Vodka .
To all the keyboard knowitalls, if you know the difference between a box and open end wrench, you SHOULD know that the budget new sensors are made in China and they're JUNK. If you can refresh a factory sensor for a nominal fee, it's worth it. Everyone's a comedian, but very few are actually mechanics.
why did you connect a am radio station to the mic good budq
With the proper attachment will it clear a bad yeast infection?
My ultrasonic cleaner has the metal pan. How much Ajax dish degeaser, and what is the other liquid solution?
Sonic bath, nice 👍
What's clean fluid you have to use?
Not for headphone users
MAN YOU DON'T HAVE TO SHOUT! LOL
Hydrolisis
Yo los limpio con ácido muriático anti sarro y quedan perfectos costo total en México del ácido medio litro 12pesos super limpios 😎😉
Gracias , buena idea
Con puro ácido o lo mezclas con agua. Podrías pasar la info completa por favor? Gracias
Con ácido doméstico Marca capitán e probando con otros pero no me convencen lo pones en un recipiente de 1/2 litro sin agua directo de la botella aproximadamente dónde una pulgada del recipiente a qué se enpape asta la rosca
Y en otro recipiente con agua lo enjuagas lo puedes cardenal o con un cepillo de alambre así repetir varias veces asta ver la cerámica lo más limpia ojo no dejarlo olvidado por mucho tiempo. En jaguar muy bien todos los sensores que e limpiado de oxígeno son de acero inox y el interior de cerámica
@@leonellongoriajimenez2199 muchas gracias hermano.
Lo haré y te comento como sale todo. Fuerte abrazo
Are you sure submerging it is completly safe for the sensor?
I just had one that started randomly flatlining almost immediately after recovering my truck from getting stuck flooded in 3 feet of water off road. (It was dark and I didn't think it was that deep till I tried to drive through it) There wasn't any water in the connector and a new sensor DID fix the issue. Coincidence maybe? The other 2 sensors didn't have any problems.
Use Aquades/distilled water dude.
Would be nice with some sort of explanation....
I saw this before in a jewelry shop they have special cleaning solution for watch Parts and rings
Thats some heavy ass dubstep mid bass sound.
COOL, Would a throttle body cleaner do the job and what else could work. Any thoughts on cleaning a cat..///.. was that just water in your video. Thank you Rick
cool soundtrack! Kraftwerk?
you can spray most sensors with sea-foam and wipe them dry carefully...
Damn fog horn from a ship 😂
Heating the tip with a torch is better and faster. Still don't mean it's gonna work it has a heat sensitive resistor inside you can't fix when that goes bad.
But did it function correctly afterwards???
Yes it does
no
It should , as long as it COMPLETELY dries
Why not just buy another one?!?
Because they're $100 each?
@@richardalty9931 how much is this machine? What solution do you use? And is all that its doing is vibrating?
It'll also clear the wax in your ears !
lemme call walter white and see if i can borrow one of these things!
Nice work 👍 but waat is thes hot water
Hi I just need ur help .i want just , i possible, to show me the photo or the model of O2 sensor who fit with my chevy sonic 2013 automatic transmission. i appreciate ur help
Thank-You
Lol is there one big enough for my whole cat haha
Pa vredi li to čistiti, rok trajanja joj je 160000km?
oh I just happen to have a ultrasonic cleaner in my garage
Lol you can pick one up on amazon for less than $40
How did it go?
So far so good
this was very helpful will on my car
are you sure that an O2 is waterproof? because submerging it in water could permanently damage it.
I seriously doubt it.
edward james I would assume simply because of where they spend their life and the harsh operating conditions including all the moisture they are subjected to(snow, rain, puddles, etc)
Your o2 sensor goes to puddles rain and snow?
edward james as long as there is no electric current should be fine nothing will short circuit. Theoretically you can submerge a phone without a battery and it would be fine as long you let it dry properly.
You do know that one by product of internal combustion is water right???
What's the name of that oxygen sensor cleaning machine, where do you buy it, and how much does it cost ? . 🤔
You can check on ebay or aliexpress. The price depends of the seller it is from 20 to 50 dollars.
Ultrasonic cleaner
How to clean O2 sensors.
Step one : buy new sensors.
Step two : profit.
Anthony Quiles How is that cleaning them?
Phase 1: collect underpants
Phase 2: ??
Phase 3: profit
jay boogie drums
You know your not high finance,
Considering stealing someone's underpants
thank you.....
Kitchen degreaser, dishwashing liquid and water
Dragan Stojkovski does it work I been to different places everyone telling me different prices
Dragan Stojkovski thanks
mkd??
Yes
Mozes li malo jasnije da napises, ne razumem ?
It's been three years. Did the sensor start throwing codes again?
What is the situation today? Did you have to replace it?
I don't know, I have now another car
Vibration with no comment sure is not cheaper than a quiet new o2 sensor
Anyone else thinking of the space ships in the old Flash Gordon series?
Donde conpran esta maquina viradora
You should put it in the middle of the tray as the waves are flowing...
What this instrument called and how I can used it , please advice?
What is the cleaning fluid.