I think that the plugs that came out were wrong that's why it was running badly I'd have cut a piece of carpet from under the centre console and had a go at repairing the worn section or replaced the carpet or found a good used one as it would bug the hell out of me you can't unsee it The usb upgrade works really well Well done for saving another one
Yes those Bosch plugs look to be longer than normal which is always a bit dodgy, but the car was running so mustn't have been too long. I changed mine to NGK which I like because of the quality, cause of a misfire. Had a bit of trouble removing them, but I may have been a bit over cautious, or maybe I wasn't "man" enough to remove them.😅
i am not sure adding interior lights you cant switch off is a good thing plus all those extra wires carrying 12 volts and extra amps if all charging sockets are in use is risk you dont need. a tyre inflater plugged into the 12v socket could get the wires a bit warm.
Not sure why you would need to shake a bottle of brake fluid before topping up Paul? The last thing you want is do is aerate the fluid.... Its an oil, there is nothing to mix together.
@@Love500 I thought as much when I watched it 🤣. But just in case you didn’t realise I thought I would mention it, bleeding the brakes / clutch is hard enough sometimes without handicapping yourself from the off.
My Karcher is a semi pro one but I’ve been told that the Bissell domestic machines are really good. I will probably try one of those when my Karcher eventually dies.
Good morning sir I'm new to your channel it's great to watch I've just bought a abarth 500 2011 I'm a newbe and absolutely love my car and your vidz are very informative ADE
I'd change those connectors for soldered joints as they are not designed for automotive use. Before you comment in an auto electrical engineer with over 40 years of working on vehicles
Thanks Paul for the shout out I’m extremely grateful you’re a Legend. The cars looking good already
Thanks for the shout out. Much appreciated. ❤ Next up is the door replacement. Of which I have watched your video about it 🎉
Nice to have one with minimal work Paul..😁
Some caps for the top mounts Paul? Other than that about done.
Great video bro👌👌just got a 5 pound ticket to help out,thxs 👍👍
Nice one.
I think that the plugs that came out were wrong that's why it was running badly
I'd have cut a piece of carpet from under the centre console and had a go at repairing the worn section or replaced the carpet or found a good used one as it would bug the hell out of me you can't unsee it
The usb upgrade works really well
Well done for saving another one
Would consider a piece of black vinyl over heel pad extending over hole in carpet. Then again the car is 13 years old. 🤷♂️👍👍
The plugs with 3 blu or green circles on the top are Better than the other One.ciao
Those plugs are a different heat range
Hiya Paul. Wouldn't change the mirrors but they make it look cheap, maybe treat the car to some caps too 😉😂
I’d think that hole in the carpet is heel wear, from the clutch leg resting position.
Yes those Bosch plugs look to be longer than normal which is always a bit dodgy, but the car was running so mustn't have been too long. I changed mine to NGK which I like because of the quality, cause of a misfire. Had a bit of trouble removing them, but I may have been a bit over cautious, or maybe I wasn't "man" enough to remove them.😅
Love the hats
He drove the fastest milk cart in the west .😅
i am not sure adding interior lights you cant switch off is a good thing plus all those extra wires carrying 12 volts and extra amps if all charging sockets are in use is risk you dont need. a tyre inflater plugged into the 12v socket could get the wires a bit warm.
Would have changed that carpet when you had everything out paul but still nice little car
Not sure why you would need to shake a bottle of brake fluid before topping up Paul? The last thing you want is do is aerate the fluid.... Its an oil, there is nothing to mix together.
Muscle memory. I actually thought the same as I did it.
@@Love500 I thought as much when I watched it 🤣. But just in case you didn’t realise I thought I would mention it, bleeding the brakes / clutch is hard enough sometimes without handicapping yourself from the off.
Hi Paul great video whats a good wet n dry vacuum
My Karcher is a semi pro one but I’ve been told that the Bissell domestic machines are really good. I will probably try one of those when my Karcher eventually dies.
Good morning sir I'm new to your channel it's great to watch I've just bought a abarth 500 2011 I'm a newbe and absolutely love my car and your vidz are very informative ADE
The cap on the top of the o/s strut looks out of position
No it’s not they often look like that.
Can u repair a blue and me for fiat 500 2013
Yes. Email me at paul@love500.co.uk and I’ll send you the repair form.
I'd change those connectors for soldered joints as they are not designed for automotive use.
Before you comment in an auto electrical engineer with over 40 years of working on vehicles
be fine as theyre inside the car and wont see any moisture.
Vibration is the problem they might loosen over time and cause a hotspot