FurnitureMaxx presents a simple video on how to disassemble a standard bar stool. Tips on how to remove hydraulic parts and what not to do during dis-assembly.
Thank you!! Wanted to return these 2 chairs to Amazon but could not get them apart - until we found you! That was easy...but, of course, it is easy when you know how - and impossible when you don't. Thanks again.
Soooo grateful for your video! Everything you instructed worked perfectly!! I have three stools to take apart to send back to Wayfair... I never ever would have figured out how to disassemble them on my own! Thank you!!
I have only one regret.. not having watched this before try to fix my bar stool.. I have done exactly the mistake at the end of the video.. by the way really a useful video ty
Lord, I didn't remove the cap and I thought I messed it all up, but I went back and removed the cap stuck inside the upper part of the stand knocked it out with a screwdriver and reassembled it. Works perfectly ❤
Ohh man! You saved my time. The sellers never would like to provide disassembly instructions. May be they dont want us to return in case we dont like the stool?
THANK YOU so much for this video!!! I was beginning to think it was a trick or something because it felt like it took forever for the circular foot pad of the bar stool to separate. I used WD-40 and let it soak for about 10 minutes and still it took almost a full minute of banging for the separation to finally occur. The other part separated much faster. One recommendation I have for you and others is to make sure the hydraulic tube is fully compressed before taking off the circular foot pad because if it's fully extended, it's really tough to compress when it's exposed. Anyway, thanks for your guidance!
Thank you, very nice explanation. In my case it was very difficult to leave the hydraulic system, so I had to hit a couple of times in a position and then turn the base and hit again, and so on, until it came out as in the video
I have tried using the hammer and block of wood, and also rubber mallet, but cannot get it to budge. Any advice? I'm still at the base hydraulic system.
Thank you. The block of wood did the trick. I tried using a rubber mallet but I couldn't get the cylinder out! Now I just need to figure out how to compress the hydraulic cylinder since it expanded to full height while I was hammering.
Thank you for the video. Wonder if anyone knows the p/n to the seat only not the entire stool so I can replace mine as it been ripped. I like this stool. Thanks
The first one came off easily, as shown. The second one, I ended up needing to match a medium depth socket from my tool set to the diameter of the metal ring. That allows you to hammer the top of the socket and pop the pneumatic/hydraulic cylinder out without touching the plastic center piece. It also allows you to avoid notching the metal ring with a screwdriver as you pound at it, lol!
you make it look so easy, am trying to transfer one bottom onto one stool to another but will not work, ive tried wd40 spray. to be honest it got that bad i smashed them up and put them outside for the scrap man
Hi was wonder I know this video is old but I have the Zuri Lush bar stools square and I can't get the gas lift out I was wondering if you can make a video on that bar stool. thanks
Super clear, straight to the point and of course extremely useful. Thank you so much! The best video I found about this topic.
Thank you!! Wanted to return these 2 chairs to Amazon but could not get them apart - until we found you! That was easy...but, of course, it is easy when you know how - and impossible when you don't. Thanks again.
life saver. the tapping with the screwdriver did the trick for me .. Thanks!
Yes, that's how I corrected my error😂
Soooo grateful for your video! Everything you instructed worked perfectly!! I have three stools to take apart to send back to Wayfair... I never ever would have figured out how to disassemble them on my own! Thank you!!
If you still need them look at my mistake.
I have only one regret.. not having watched this before try to fix my bar stool.. I have done exactly the mistake at the end of the video.. by the way really a useful video ty
Thanks so much, possibly the most useful 3 minute video I have ever seen!
Awesome, helped me disassemble 4 bar stools in 15 minutes. Thank you very much, a great video
Life saver video thank you! Could not find any info provider by seller to take it apart and be able to return in original box. Awesome!
Thank you sir. Easy to follow and wonderfully executed you deserve an Oscar ;-)
Lord, I didn't remove the cap and I thought I messed it all up, but I went back and removed the cap stuck inside the upper part of the stand knocked it out with a screwdriver and reassembled it. Works perfectly ❤
Thank you so much, the instructions were vague. This video saved the day.
You are master of clear and concise! Thank you!
Thanks, you just saved me $100 for a return I couldn't get apart.
Ohh man! You saved my time. The sellers never would like to provide disassembly instructions. May be they dont want us to return in case we dont like the stool?
THANK YOU so much for this video!!! I was beginning to think it was a trick or something because it felt like it took forever for the circular foot pad of the bar stool to separate. I used WD-40 and let it soak for about 10 minutes and still it took almost a full minute of banging for the separation to finally occur. The other part separated much faster. One recommendation I have for you and others is to make sure the hydraulic tube is fully compressed before taking off the circular foot pad because if it's fully extended, it's really tough to compress when it's exposed. Anyway, thanks for your guidance!
Thank you, very nice explanation. In my case it was very difficult to leave the hydraulic system, so I had to hit a couple of times in a position and then turn the base and hit again, and so on, until it came out as in the video
I have tried using the hammer and block of wood, and also rubber mallet, but cannot get it to budge. Any advice? I'm still at the base hydraulic system.
Thank, clear and to the point.
Where can I get a new cylinder? Where do I find the information about the size?
Thank you. The block of wood did the trick. I tried using a rubber mallet but I couldn't get the cylinder out! Now I just need to figure out how to compress the hydraulic cylinder since it expanded to full height while I was hammering.
Oh thank you so much for sharing this!
Thank you! So helpful and concise!
Thanks! I had to hammer both places repeatedly - like 20-30 times - but the pieces finally separated.
Can you provide a link to re-assemble. My Stool seems to be staying in the furthest position up. I'll take apart and re-assemble. Thanks.
Thank you so much, your video is extremely helpful!
Very helpful, thank you 👍
Thank you for the video. Wonder if anyone knows the p/n to the seat only not the entire stool so I can replace mine as it been ripped. I like this stool. Thanks
Thanks so much for showing how to the extract the gas cyclinder itself.
Hi what should i do i hit that black clip so means my bar stool damage I can't put that back? Any suggestions.ty
Worked like a charm. Although I did the top half first and used a rubber mallet.
The first one came off easily, as shown. The second one, I ended up needing to match a medium depth socket from my tool set to the diameter of the metal ring. That allows you to hammer the top of the socket and pop the pneumatic/hydraulic cylinder out without touching the plastic center piece. It also allows you to avoid notching the metal ring with a screwdriver as you pound at it, lol!
Great video. It worked like a charm.
A great help, good clear video. Thank you
Thank you! You make life easy
thanks for the video...it worked wonders
you make it look so easy, am trying to transfer one bottom onto one stool to another but will not work, ive tried wd40 spray. to be honest it got that bad i smashed them up and put them outside for the scrap man
Thanks! dismantled so simply!
sir good afternoon Po.what sizes your gas cylinder
Thank you for making this video!!!!!
Worked great! Thanks
How do I unlock an extended cylinder after disassembly. It is stuck in the open position. Help
THANK YOU so much
Mine is stuck in the up position. How do I fix
Thank you, I was breaking my back to pull it out.
Thank you Thank you Thank you! This is the best!
Thankyou Scott hall!
how can I get the black cap off it won't budge
2:14 *when the hammer misses the screw driver but hits your thumb.*
Thanks!
Pero no hiciste la reparación...
Hi was wonder I know this video is old but I have the Zuri Lush bar stools square and I can't get the gas lift out I was wondering if you can make a video on that bar stool. thanks
Gracias!
Thanks bro💕
I can't seem to disassemble.
Thank you!
thanks again!!!
I've been waiting on this thing with a hammer so hard I'm afraid it's no longer gonna be reassembleable when I finally get them apart.
WORKED FLAWLESSLY
Thank you!! We didn’t have to watch a ton of nonsense!!
Thanks a lot. Very helpful