Just purchased this set. I need a wire D replacement. One of the connectors is bad and my left saddlebag lights don’t work. How do I contact you for this?
Bought this set used. Guy I bought it from said 4hr installation. Your video made simple work out of overcomplicated written directions. Install time, less than two hours and that is partially because I wanted the wires run a certain way that would make it easy to take the bags on and off as I travel a lot and would like to use them as luggage. Thanks for the excellent video!
Because of you guys I am going to have to break down and buy a Ryker Rally. I really wasn't going to get one as they are to bare bones. But with all these mods... I gotta have one!
I have them and love them. Only one thing to be aware of-if you ride two-up the support bar(approx 1" square shape) that is under the top case will bottom out and hit the fender of 900 Ryker. I have to look at getting an Elka to keep it from bottoming out. I have a video about it. :-)
Hello CeeDee, we actually partnered up with Elka this week because we also feel that the rear shock on the Ryker is too soft.. especially when traveling with a passenger. We'll be doing a comprehensive video on the difference with and without aftermarket rear suspension. Stay tuned...
This is what I need cause a driver hit me from behind at a stop light at night and my wife took most of the force of the hit luckily it was the high back rest but I believe needs more back light to be seen at night. When I get my bike back I'm going to get this when you guys get more in stock they look alot safer for passengers as well.
And we went ahead and mounted a large Shad expandable top case to the Max-Mount on our Ryker and a Shad removable side case a few months ago thinking we solved the storage issue. Ugh
These seem really awesome. The only thing is that while it's nice to have the locks on the compartments, they do not lock to the bike. With a push of that button, anyone can come take it & open it later at home.
Hello, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".
The video was helpful but missed some key points like the bracket the saddle bags attach to, the little rubber bumpers that are a booger to get on and the rest of the wiring, decent helpful video and every Ryker ryder needs these.
I second this, been waiting for a one piece top kit that is lockable that works with the max mount. This fits the bill but don't need the extra saddle bags.
Yeah this looks pretty sweet. I assume to take a bag with you, you also have to undo the wires everytime? That's kind of a downer.. still pretty cool though
Yes.. you would. There is one quick release wiring clip per saddlebag and two quick release wiring clips for the top case. We weren't originally gonna have LED illumination for that reason.. but we felt that the safety factor of Running, Brake & Turn Signal integration outweighed the inconvenience of having to unplug the wiring for bag removal.
@@Slingmods I completely agree with you and that the safety factor far outweighs the annoyance of removing wires. I wonder if on a future iteration something could be engineered so the when the bag is put in place it makes contact automatically. I'm no engineer but seems possible. I do love this kit! I know you will sell tons of them. Love the videos and all the cool Ryker stuff you guys have!
Finally!! Too bad you don't yet offer it with different accent colours. I really want a set to match the immortal white panels up front. Make it happen!
In anticipation of my set arriving, I keep watching this over and over. I think I have a problem. One question. You are shown running a wire along the swing arm, but don't show where to zip tie it. Can you elaborate?
Hello Midlife.. that's funny. In regards to the harness, you'll run the new wire harness down the swing arm & frame with the existing harness to the pivot point of the swing arm. There's a harness already there, so I zip tied them together. Just make sure you leave a little slack in the harness to allow for the articulation of the swingarm's suspension travel.
@@danmorris2860 it doesn’t plug into anything up front, it just runs along the swing arm, then back towards the fender you removed and to the mounts for bags.
Yes you can. Here's a pic of both running together: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system-2.jpg
Has anyone looked at the MAX MOUNT PLATE WARNING? I did but it was too late before buying these cases. THE WARNING SAYS ONLY FOR 22 POUNDS. NOW,WHY IS Can AM SELLING SEATS FOR THE RYKER IF ALL PASSENGERS ARE OVER 22 POUNDS? WHEN, passenger is leaning on the backrest that are putting tension on all four bolts which can cause them to snap. Which exactly happened to me ruining my Ryker. Can Am won't replace my Max Mount Plate and Slingmods won't replace my luggage bags even when they were just bought. Saying it was Mechanical error. Not thinking it was the Max Mount Plate that only supported 22 pounds and specially not made for a passenger to sit on where the seat goes. The person definitely put them on correctly to.
Hello, if you could email us at support@slingmods.com with your exact shipping address we'd be happy to get you an international shipping quote. thank you!
Hello Wally, no it cannot. You'd need a driver backrest as a separate mod. We have this one here that is compatible with the luggage system: www.slingmods.com/canam-ryker-driver-backrest-spyderextras
Fair enough, but I hope you folks will consider making a mount that could do this. I think a whole lot of Ryker riders never carry a passenger and moving the top case ahead will still look good, probably handle better too. Or maybe offer a mount that we could clip a Shad or Givi top case on where the passenger seat is would be nice. Thanks.
Will the saddle bags fit/work with the LinQ Cooler / Thermal Box? I like the Idea of the extra saddle bag, but prefer the cooler since I carry waters and lunch for long rides.
Can you adjust the suspension so you don't have to worry about bottoming out with a passenger or do you need to get new suspension? I know I can adjust the stock suspension with a tool.
The Rally Models have adjustable suspension. For the Non-Rally models we two products to address that issue here: www.slingmods.com/canam-ryker-lift-kits
I have seen this Top Case Videos in the 3 piece luggage set that shows it comes with a liner. Do They all come with one or have You discontinued them? Buddy just received his with NO Liner.
Hello Jim, if you could please have your buddy contact our customer service team we're happy to resolve any issues. They're available here: www.slingmods.com/index.php?route=information/contact
Hi, I'm subscribed to your channel. I'd like to ask you a question, what does the entire kit of suitcases and supports for the Ryker cost, and take it to Spain?
Hello, thank you for being a channel subscriber. Here's the link to the luggage kit: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system If you add it to cart and enter in your shipping address, the shopping cart software will calculate your international shipping costs. Thank you!
@@dabo1971 Hello Dabo... I can't say with certainty that your rear shock will need to be adjusted at all.. as it depends on overall combined driver and passenger weight. It may be best to contact your BRP dealer with that inquiry to see if that's necessary, as they'll have more information on that topic.
Hello Nick, our Customer Service Team is standing by for assistance. You can create a ticket here: www.slingmods.com/index.php?route=information/contact or contact us at 800-211-1396 Mon-Fri 9am-5pm PST!
hello from Paris,i have a ryker 900 sport and already have the 3 cases,is it possible to buy only the 3 steel support piece ? thanks very much and have a good day
So they are lockable. But also come off pretty easy. So what's there to stop someone from just disconnecting the entire thing and walking away with it?
It looks like the top case and saddlebags just pop off and on . What to anyone from just popping of and stealing them. Can they be locked down in any way?
Hello, the best way to do that is to add the item to your shopping cart and enter in your Shipping Address to get an accurate International Freight Quote. Here's the link to the product: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!
Lol. Hello Midlife.. we we're gonna surprise everyone with an early ETA.. but since you asked... we started shipping today 🙂.. We're shooting for all pre-orders to be sent out by March 16th! Thanks!
Hello Michael, we don't currently have this product installed for me to reference unfortunately.. but it is a popular question. I'll have to reach out to the video team on that one to see if we have some footage of that part of the installation. In regards to installation time, i'd say from 1-2 hours.. depending on how clean you want your wiring runs to be. 😁
Hey compre el set de tres guanteras y se rompió el arnés del cable de la luz guantera lado derecho como se llama y como podría yo hacer para que me manden uno si me pudieran be ayudar no estoy diciendo que venia defectuosa fue mi culpa al instalarla gracias.
Claro, estaremos encantados de ayudarte con esto. Si pudiera, envíe un ticket a nuestro equipo de soporte con imágenes y su solicitud, podemos ayudarlo a encontrar una solución. Aquí está el enlace para enviar el ticket: www.slingmods.com/index.php?route=information/contact ¡Gracias!
Hello Scott, this system was purpose built for use with a passenger. You'd don't have to use the top case as a backrest for your passenger if you don't want to.. but it cannot slide forward over the passenger seat if that's what you're thinkin'.
Yes, here's a picture of it with our Ultimate Seat: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system.jpg
Hello Duran, our MadStad Adjustable Ryker Shield is available here and has several different tint levels and heights to choose from... check it out: www.slingmods.com/canam-ryker-adjustable-windshield-madstad
If you plan on removing your bags at every stop... yeah it would get annoying. The intent with those quick disconnects were for those that need to remove the bags for a hotel room or something. For daily riding the bags are locked in place with the key and can be left on the bike if desired.
At the 4:30 minute mark you ran the wiring harness toward the front of the Ryker but you did not show what it connected to. Could you explain where it connects to please? Thanks
Hello Dark Knight, sure we can help you with that. Please submit a support ticket to our customer service team here with your request and we're happy to get you taken care of: www.slingmods.com/index.php?route=information/contact
@@elestromusicgamesfun1101 Hello Elestro, yes we do. If you could submit a ticket here: www.slingmods.com/index.php?route=information/contact with your shipping address we'd be more than happy to get you a freight quote. Thank you!
Hello Martin, if you have not done so already please contact our Customer Service Team at your convenience so they may assist you. Here's the link for that: www.slingmods.com/index.php?route=information/contact
What’s to stop someone from stealing the cases? They have no locking mechanism to the frame. Also, you will have to disconnect the wires every time you do remove the cases. Seems to me that would need to be resolved before I’ll spend $900 bucks for these.
Hello Tom, when you lock the case with the key, the bag locks to the luggage rack. You will indeed need to unplug these if you plan on removing. That can be a deal breaker for some.
Hello Israel, this item is available here and is made specifically for the Ryker application: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Please reach out to our customer service team at the link below and we can get you a shipping quote to Mexico. www.slingmods.com/index.php?route=information/contact
Not for this one.. but we do have the Shad Rear Trunk Kit here: www.slingmods.com/canam-ryker-top-case-luggage-system-shad We don't have lights yet for the Shad kit.. but it's something we're looking at as an "add on" for next season. Thanks!
Hello Denver, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".
What if we’ve already installed the Max-Mount, saddlebag mount and have a Shad saddlebag installed. Is our saddlebag mount and saddlebag compatible? Would we have to ditch the bag and saddlebag mount to install the mount(s) in this kit and use these bags?
Hello Destiny, the rear Ryker shock is quite soft. If you plan on riding with the luggage and a rear passenger it would be our recommendation to upgrade to one of our Elka Rear Shocks. You can find the rear suspension here: www.slingmods.com/canam-ryker-rear-shock-coilover-elka-suspension
@@黄凯文-b9u Hello, we're happy to assist you on this. Can you please send us a support ticket here: www.slingmods.com/index.php?route=information/contact&vehicle=1 so my customer service team can assist in these matters. Please included your order information on the inquiry. Thank you!
Not for this 3-piece kit.. but we actually just completed our Shad bag prototype. It will only be a top case though and utilize the SH47 case along with a custom rack to mount to the Ryker, as well as a passenger backrest pad and removable storage bag liner. Thanks!
Hello Michael, this kit is $699. You can get more information about this product here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!
Hello John, prices are subject to change such as sales promotions, raw material costs etc. If we listed the price in the video and the price changed.. the video price would be inaccurate. All of our descriptions include a link directly to the respective product page so that you can view up to date product pricing at any time. Thanks for watching!
2 года назад
Hallo. Ist es möglich, genau solche komplette Set bei Ihnen zu kaufen und nach Deutschland zu versenden? Grüße Robert.
Hallo, ja, das ist es. Wenn Sie das Gepäcksystem zu Ihrem Einkaufswagen hinzufügen und den Bestellvorgang durchlaufen, sehen Sie die Option, Ihr Land auszuwählen, um ein Echtzeit-Versandangebot an Ihren Standort zu erhalten. Danke für dein Interesse!
Yes.. unfortunately we have no control over international freight and customs fees. We can however see what we can do to try and discount the product to offset a portion of the overseas shipping costs if you'd like to move forward with this mod. Our customer service team is available for assistance on that and can be reached here: www.slingmods.com/index.php?route=information/contact Thank you!
Hello Jose, we have not tried the factory vertical back support from BRP with this setup. How far past the back of the passenger seat cushion does it extend?
🛒Can-Am Ryker 3-Piece Luggage System is available here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system
Just purchased this set. I need a wire D replacement. One of the connectors is bad and my left saddlebag lights don’t work. How do I contact you for this?
@@SoundMindADV Hello, our customer support team can assist with that. You can contact them here: www.slingmods.com/index.php?route=information/contact
By far the best Ryker Mod ever!
This guy finishes every sentence like a flight attendant.
You say that like that's a bad thing. Lol.
Doggone, this luggage makes the ryker so desirable.
Bought this set used. Guy I bought it from said 4hr installation. Your video made simple work out of overcomplicated written directions. Install time, less than two hours and that is partially because I wanted the wires run a certain way that would make it easy to take the bags on and off as I travel a lot and would like to use them as luggage. Thanks for the excellent video!
Awesome Preston! Really glad to hear that. Thank you for sharing.
This is a must buy for me once I get my ryker.
I bought this for my Ryker. was pretty easy to install and love them. lots of storage now!
Right on
Because of you guys I am going to have to break down and buy a Ryker Rally. I really wasn't going to get one as they are to bare bones. But with all these mods... I gotta have one!
That's awesome James! We tend to have that effect on people. Lol. We have a lot more cool stuff coming for this bike as well. Thx for watching.
I have them and love them. Only one thing to be aware of-if you ride two-up the support bar(approx 1" square shape) that is under the top case will bottom out and hit the fender of 900 Ryker. I have to look at getting an Elka to keep it from bottoming out. I have a video about it. :-)
Hello CeeDee, we actually partnered up with Elka this week because we also feel that the rear shock on the Ryker is too soft.. especially when traveling with a passenger. We'll be doing a comprehensive video on the difference with and without aftermarket rear suspension. Stay tuned...
This what I was looking for this
My previous spider had this set up, nice to see I can get it on my Ryker.
This is what I need cause a driver hit me from behind at a stop light at night and my wife took most of the force of the hit luckily it was the high back rest but I believe needs more back light to be seen at night. When I get my bike back I'm going to get this when you guys get more in stock they look alot safer for passengers as well.
This is what I've been waiting for, now I'll get a Ryker thanks, Brandon... 👍
Awesome Ron.. Glad to hear it!
Yer making me want a Ryker even more now. Sweet mods!!
And we went ahead and mounted a large Shad expandable top case to the Max-Mount on our Ryker and a Shad removable side case a few months ago thinking we solved the storage issue. Ugh
This makes it look really cool even if I don’t have any use for the other two holders 😂
These seem really awesome. The only thing is that while it's nice to have the locks on the compartments, they do not lock to the bike. With a push of that button, anyone can come take it & open it later at home.
Hello, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".
Exactly what it needed.
The video doesn't make clear where the wire you ran up the swing arm to the front of the bike goes. What is it getting plugged into?
The video was helpful but missed some key points like the bracket the saddle bags attach to, the little rubber bumpers that are a booger to get on and the rest of the wiring, decent helpful video and every Ryker ryder needs these.
Now, that is very nice... Now I may Rethink about buying the ryker... It really transforms the bike... Makes it look like a big bike not a toy.
Agree Rick! Thx for posting.
Yasssss!!! That is one cool kit! Even matches up to the styling very nicely! Been a long wait! Wondering how many pizzas will fit in that top bag? Lol
Lol.. quite a few!
This will be my 1st upgrade
I wish I could get only one piece.. The top piece
That may be offered down the road.. but for now it will only be offered as the 3-Piece kit. Thanks for the feedback.
I second this, been waiting for a one piece top kit that is lockable that works with the max mount. This fits the bill but don't need the extra saddle bags.
Me too just the top not the side bags
Yeah this looks pretty sweet. I assume to take a bag with you, you also have to undo the wires everytime? That's kind of a downer.. still pretty cool though
Yes.. you would. There is one quick release wiring clip per saddlebag and two quick release wiring clips for the top case. We weren't originally gonna have LED illumination for that reason.. but we felt that the safety factor of Running, Brake & Turn Signal integration outweighed the inconvenience of having to unplug the wiring for bag removal.
@@Slingmods well i thinks its the best mod, and I don't even have a Ryker yet.
@@Slingmods I completely agree with you and that the safety factor far outweighs the annoyance of removing wires. I wonder if on a future iteration something could be engineered so the when the bag is put in place it makes contact automatically. I'm no engineer but seems possible. I do love this kit! I know you will sell tons of them. Love the videos and all the cool Ryker stuff you guys have!
@@PhantomFox1 That would be amazing Jason! Thx for the feedback man.
You can get liners for the cases and take those instead of the entire case.
That is dope! Every 5 things I buy from you ima need a discount! LOl
Awesome!!! A MUST HAVE!!! ^5 Slingmods
Very cool, need something like this for the F3 Base
Hello Chris, in the works! We'll have this exact setup for the F3 / F3s here shortly. Stay tuned...
Finally!! Too bad you don't yet offer it with different accent colours. I really want a set to match the immortal white panels up front. Make it happen!
Lol. We can always make a Tufskinz kit for it.. that would peel and stick over the glossy black portions. That'd look pretty cool I think.
@@Slingmods you should sell it as a cheap option! Lol that thing is already super pricy! Haha
Brb setting up a GoFundMe for it rn hahaha
@@denvercarver2379 Lmao!
Have it wrapped :)
In anticipation of my set arriving, I keep watching this over and over. I think I have a problem. One question. You are shown running a wire along the swing arm, but don't show where to zip tie it. Can you elaborate?
Hello Midlife.. that's funny. In regards to the harness, you'll run the new wire harness down the swing arm & frame with the existing harness to the pivot point of the swing arm. There's a harness already there, so I zip tied them together. Just make sure you leave a little slack in the harness to allow for the articulation of the swingarm's suspension travel.
@@Slingmods Gotcha. Thank you!
@@Slingmods for the harness you run up front where and how does it plug in up front?
@@danmorris2860 it doesn’t plug into anything up front, it just runs along the swing arm, then back towards the fender you removed and to the mounts for bags.
Look so Awesome.
Can you add the 3 piece Touring Luggage system with the new Ultimate Seat? With the exception of the passenger back rest.
Yes you can. Here's a pic of both running together: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system-2.jpg
Has anyone looked at the MAX MOUNT PLATE WARNING? I did but it was too late before buying these cases. THE WARNING SAYS ONLY FOR 22 POUNDS. NOW,WHY IS Can AM SELLING SEATS FOR THE RYKER IF ALL PASSENGERS ARE OVER 22 POUNDS? WHEN, passenger is leaning on the backrest that are putting tension on all four bolts which can cause them to snap. Which exactly happened to me ruining my Ryker. Can Am won't replace my Max Mount Plate and Slingmods won't replace my luggage bags even when they were just bought. Saying it was Mechanical error. Not thinking it was the Max Mount Plate that only supported 22 pounds and specially not made for a passenger to sit on where the seat goes. The person definitely put them on correctly to.
Awesome!
This is really good! I want it.
How much does it cost to install this in Japan?
Hello, if you could email us at support@slingmods.com with your exact shipping address we'd be happy to get you an international shipping quote. thank you!
I bought but 6 things from them I Want is the top case don't want the side cases
That looks like the the Ryker 900 Rally Edition, I just bought a Ryker 600 without the rear seat, will these work on that as well?
Hello Curon, Yes it will but you'll need to add the BRP Max Mount to your bike first. Thank you!
How often is the can am spyder required for oil change , every how many miles ??????
Thanks that's was easy!!!
Can the top case be mounted ahead if your never going carry a passenger? That way we can use the backrest for the driver.
Hello Wally, no it cannot. You'd need a driver backrest as a separate mod. We have this one here that is compatible with the luggage system: www.slingmods.com/canam-ryker-driver-backrest-spyderextras
Fair enough, but I hope you folks will consider making a mount that could do this. I think a whole lot of Ryker riders never carry a passenger and moving the top case ahead will still look good, probably handle better too. Or maybe offer a mount that we could clip a Shad or Givi top case on where the passenger seat is would be nice. Thanks.
This is so cool
Will the saddle bags fit/work with the LinQ Cooler / Thermal Box? I like the Idea of the extra saddle bag, but prefer the cooler since I carry waters and lunch for long rides.
Hello, this item is not compatible with the LinQ accessories.
Is this compatible with the under seat LED lights y’all sell? I installed those and would want to keep using them.
Can you adjust the suspension so you don't have to worry about bottoming out with a passenger or do you need to get new suspension? I know I can adjust the stock suspension with a tool.
The Rally Models have adjustable suspension. For the Non-Rally models we two products to address that issue here: www.slingmods.com/canam-ryker-lift-kits
I have seen this Top Case Videos in the 3 piece luggage set that shows it comes with a liner. Do They all come with one or have You discontinued them? Buddy just received his with NO Liner.
Hello Jim, if you could please have your buddy contact our customer service team we're happy to resolve any issues. They're available here: www.slingmods.com/index.php?route=information/contact
the cables doesn't come like it's shone in the video . but not hard to figure out
So I'm assuming when you remove the bag you have to disconnect the cable
Yes, that's correct.
That is so awesome I need one of these
Hi, I'm subscribed to your channel. I'd like to ask you a question, what does the entire kit of suitcases and supports for the Ryker cost, and take it to Spain?
Hello, thank you for being a channel subscriber. Here's the link to the luggage kit: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system If you add it to cart and enter in your shipping address, the shopping cart software will calculate your international shipping costs. Thank you!
Is this only for the Rally version? I’m asking because you can’t adjust the rear suspension without buying the 2-up adjustment
Hello Dabo, this will also work on the non-rally Ryker as long as you have the BRP Max Mount installed.
@@Slingmods I do. I just was wondering about adjusting the rear suspension
@@dabo1971 Hello Dabo... I can't say with certainty that your rear shock will need to be adjusted at all.. as it depends on overall combined driver and passenger weight. It may be best to contact your BRP dealer with that inquiry to see if that's necessary, as they'll have more information on that topic.
Slingmods.com ok thank you
Now make that mounting rack for the 2019 Spyder F-3 basic with that useless little compartment behind the riders seat.
This exact system is in the works for the F3 / F3-S as well. Stay tuned...
Slingmods.com I will be standing by. I have a F3-S and I am very interested in the same configuration! Thanks and looking forward to the update.
@@kenc.852 Glad to hear it Ken.. we're excited too!
I agree need one for the F3
I just instald them on my RYKER 900 THE LEFT SIDE BAG WONT BLINK I SWITCH THE WIRES AROUND TO MAKE SURE IT WAS RIGHT BUT STILL NO BLINKING
Hello Nick, our Customer Service Team is standing by for assistance. You can create a ticket here: www.slingmods.com/index.php?route=information/contact or contact us at 800-211-1396 Mon-Fri 9am-5pm PST!
hello from Paris,i have a ryker 900 sport and already have the 3 cases,is it possible to buy only the 3 steel support piece ?
thanks very much and have a good day
Hello Patrick, my apologies sir. These are pre-bundled kits. I'm regretfully unable to separate the brackets from the bags.
So they are lockable. But also come off pretty easy. So what's there to stop someone from just disconnecting the entire thing and walking away with it?
When you lock the bag with the key, it also locks to the luggage bag to the rack itself.
@@Slingmods good to know. Since that wasn't stated in the video. Thanks for the info.
wow very impressed.
It looks like the top case and saddlebags just pop off and on . What to anyone from just popping of and stealing them. Can they be locked down in any way?
Hello Lauretta, yes. When the bags are locked with the key the quick release button will not work to remove the bags.
Will the flashing brake light mod you offer make all the bag lights blink as well?
Yes sir it will! It actually looks pretty crazy with the flasher kit installed.
Hello, I have a Ryker 900. How much would the whole set cost me, suitcases, supports and bring it to Spain? if you are so kind to inform me, thank you
Hello, the best way to do that is to add the item to your shopping cart and enter in your Shipping Address to get an accurate International Freight Quote. Here's the link to the product: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!
I wonder if this will help w my doordash delivery
haha. Yes it would indeed.
I have the ryker lighted plate, the center led about license plate, and the side leds. Will this work with all those
Yes, they'll all work together.
Is it April yet? Can't wait to get my set!
Lol. Hello Midlife.. we we're gonna surprise everyone with an early ETA.. but since you asked... we started shipping today 🙂.. We're shooting for all pre-orders to be sent out by March 16th! Thanks!
Slingmods.com WHAT???!!!! You just made my year!!!!!!! What fantastic news!!!!!! Much love!!!!!
Where do you hook the front of the wiring harness to ? , you did not show that ?what was time to complete this project?
Hello Michael, we don't currently have this product installed for me to reference unfortunately.. but it is a popular question. I'll have to reach out to the video team on that one to see if we have some footage of that part of the installation. In regards to installation time, i'd say from 1-2 hours.. depending on how clean you want your wiring runs to be. 😁
Hey compre el set de tres guanteras y se rompió el arnés del cable de la luz guantera lado derecho como se llama y como podría yo hacer para que me manden uno si me pudieran be ayudar no estoy diciendo que venia defectuosa fue mi culpa al instalarla gracias.
Claro, estaremos encantados de ayudarte con esto. Si pudiera, envíe un ticket a nuestro equipo de soporte con imágenes y su solicitud, podemos ayudarlo a encontrar una solución. Aquí está el enlace para enviar el ticket: www.slingmods.com/index.php?route=information/contact ¡Gracias!
Excuse me, where can I buy a rear mud guard that covers the entire rear wheel on my 2022 Riker thanks!!!
Hello, check these out: www.slingmods.com/canam-ryker-rear-mud-flap-rock-guard-rally-armor
I do not want to add a passenger seat. Does the trunk mount further forward if i choose so?
Hello Scott, this system was purpose built for use with a passenger. You'd don't have to use the top case as a backrest for your passenger if you don't want to.. but it cannot slide forward over the passenger seat if that's what you're thinkin'.
Will 3-piece touring luggage with LED lighting work or fit on custom aftermarket seats
Yes, here's a picture of it with our Ultimate Seat: www.slingmods.com/image/catalog/ultimate-seats/ryker/canam-ryker-ultimate-seats-installed-with-3-piece-luggage-system.jpg
Do you have a passenger armrest solution that would match this setup?
Yes, we do have one coming out shortly. It's not yet released though.
Hola amigo q presio tienen las maletas para la moto esa quiero unas así
Can you provide me info on the blackout windshield please. Thanks in advance
Hello Duran, our MadStad Adjustable Ryker Shield is available here and has several different tint levels and heights to choose from... check it out: www.slingmods.com/canam-ryker-adjustable-windshield-madstad
The removable option seems almost pointless if you don't have a decent quick disconnect system tho.
If you plan on removing your bags at every stop... yeah it would get annoying. The intent with those quick disconnects were for those that need to remove the bags for a hotel room or something. For daily riding the bags are locked in place with the key and can be left on the bike if desired.
At the 4:30 minute mark you ran the wiring harness toward the front of the Ryker but you did not show what it connected to. Could you explain where it connects to please? Thanks
Did you ever get a response to this? I just noticed it as well
This is the answer I need!!!😤
My wires have been cut :-( . Do you sell wiring kits or do I have to buy another set?
Hello Dark Knight, sure we can help you with that. Please submit a support ticket to our customer service team here with your request and we're happy to get you taken care of: www.slingmods.com/index.php?route=information/contact
I just want the top-case.
Hello Elestro, this is only sold as a 3-piece kit at this time. Thank you!
@@Slingmods I understand. Do you ship to Europe?
@@elestromusicgamesfun1101 Hello Elestro, yes we do. If you could submit a ticket here: www.slingmods.com/index.php?route=information/contact with your shipping address we'd be more than happy to get you a freight quote. Thank you!
@@Slingmods - Splendid! I need to actually buy a Ryker first though. That pesky little detail. 😄
@@elestromusicgamesfun1101 Lol.
Can someone tell me what size the mounting bolts to the max mount are I bought this setup used and unfortunately the bolts were not included.
Hello Martin, if you have not done so already please contact our Customer Service Team at your convenience so they may assist you. Here's the link for that: www.slingmods.com/index.php?route=information/contact
What’s to stop someone from stealing the cases? They have no locking mechanism to the frame. Also, you will have to disconnect the wires every time you do remove the cases. Seems to me that would need to be resolved before I’ll spend $900 bucks for these.
Hello Tom, when you lock the case with the key, the bag locks to the luggage rack. You will indeed need to unplug these if you plan on removing. That can be a deal breaker for some.
Where do you hook the front of the wiring harness to? It never explains that in the video.
The harness zip ties to the factory harness down the swing arm. Make sure you're wiring is free and clear from any moving suspension components.
Where Can I found this Rack and baggege accesorios to Can-Am Ryker? Is special to this model or is a universal rack? I’am in Mexico city. Regards
Hello Israel, this item is available here and is made specifically for the Ryker application: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Please reach out to our customer service team at the link below and we can get you a shipping quote to Mexico. www.slingmods.com/index.php?route=information/contact
Does the lock prevent the cases from being removed? Locking them doesn’t do any good if someone can walk up and just remove them.
Yes.. when the cases are locked.. the quick release buttons will not work.
Slingmods.com thanks.
Super ...
Can you supply just the top luggage box with lights in ?
Not for this one.. but we do have the Shad Rear Trunk Kit here: www.slingmods.com/canam-ryker-top-case-luggage-system-shad We don't have lights yet for the Shad kit.. but it's something we're looking at as an "add on" for next season. Thanks!
we can hear you and see all the words that you're saying we just really can't see the luggage bags or quality so not sure about purchasing
What is the max weight load for each case?
Hello Scott, max recommended weight per the mfg is 10lbs per bag. Thanks!
How do these cases secure to the bike, via clip and quick release with, or without a lock to keep them from being stolen
Hello Denver, when the bags are "locked" the quick release button will not work, so that your luggage can't be stolen. The bags must be unlocked with the key to use the "quick release feature".
Perfect, as I thought!
Can I install this and use the upgraded comfort seat for passenger/driver?
Hello Abdul, we have not personally tried that pairing.. but I don't see a problem with that.
What if we’ve already installed the Max-Mount, saddlebag mount and have a Shad saddlebag installed. Is our saddlebag mount and saddlebag compatible? Would we have to ditch the bag and saddlebag mount to install the mount(s) in this kit and use these bags?
Hello Ryan, this system is intended for Ryker owners without a current luggage solution and would not be compatible with the Shad saddlebag setup.
Slingmods.com,
Thanks for the quick reply! 😎
Can a passenger ride with the 3 pieces of luggage?
Hello Destiny, the rear Ryker shock is quite soft. If you plan on riding with the luggage and a rear passenger it would be our recommendation to upgrade to one of our Elka Rear Shocks. You can find the rear suspension here: www.slingmods.com/canam-ryker-rear-shock-coilover-elka-suspension
Hi, Can i confirm that the turn signals on this luggage system blink amber/orange?
Hello Shane, the turn signals are shown here: ruclips.net/video/t7cYJrVZya8/видео.html They are indeed amber/orange in illumination color.
after pull the rear mud flap out, there is a gap between sits. road debris will splash over your back. how to fix it!
If you select the Rally model option when purchasing we now include a water splash guard with the kit.
@@Slingmods i did broght them aready, they r not come with it, and they damaged by shipping (Fedex).
@@黄凯文-b9u Hello, we're happy to assist you on this. Can you please send us a support ticket here: www.slingmods.com/index.php?route=information/contact&vehicle=1 so my customer service team can assist in these matters. Please included your order information on the inquiry. Thank you!
Hi is it possible with the shad sh36 and Topcase sh58 x cases ? The System is nice but the Cases looks not so cool
Not for this 3-piece kit.. but we actually just completed our Shad bag prototype. It will only be a top case though and utilize the SH47 case along with a custom rack to mount to the Ryker, as well as a passenger backrest pad and removable storage bag liner. Thanks!
What does a complete ryker like you have in your video with luggage cost ?
Hello Michael, this kit is $699. You can get more information about this product here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thank you!
I like your vids. But how come you never give the price?
Hello John, prices are subject to change such as sales promotions, raw material costs etc. If we listed the price in the video and the price changed.. the video price would be inaccurate. All of our descriptions include a link directly to the respective product page so that you can view up to date product pricing at any time. Thanks for watching!
Hallo. Ist es möglich, genau solche komplette Set bei Ihnen zu kaufen und nach Deutschland zu versenden?
Grüße Robert.
Hallo, ja, das ist es. Wenn Sie das Gepäcksystem zu Ihrem Einkaufswagen hinzufügen und den Bestellvorgang durchlaufen, sehen Sie die Option, Ihr Land auszuwählen, um ein Echtzeit-Versandangebot an Ihren Standort zu erhalten. Danke für dein Interesse!
Great set up but seriously expensive for those outside the USA...
Yes.. unfortunately we have no control over international freight and customs fees. We can however see what we can do to try and discount the product to offset a portion of the overseas shipping costs if you'd like to move forward with this mod. Our customer service team is available for assistance on that and can be reached here: www.slingmods.com/index.php?route=information/contact Thank you!
Will it fit without the two up seat.
Hello R Mason, yes but it requires the BRP max mount.
make one with just the two saddle bags
can these bags be installed on the 2022 ryker rally
Yes, they can.
Is the luggage package compatible with the two brothers exhaust system?
Hello Jimmy, yes it is.
Is this compatible with the passenger vertical foldable back rest too?
Hello Jose, we have not tried the factory vertical back support from BRP with this setup. How far past the back of the passenger seat cushion does it extend?
Can you tell me please, where did you buy this luggage thing?
I really need it for my Ryker Rally Edition (:
This is available here: www.slingmods.com/canam-ryker-touring-saddlebags-rear-trunk-top-case-luggage-system Thx for watching!
Thank you 🙏
Love your videos
How mutch is it