I love it. If I recall correctly I glued myself to my desk in fourth grade. I turned 65 this year. Thank reminding me ... Good times. Thank you for all you do
Hey waffles, I started watching your RUclips channel recently. You're giving me inspiration and the little push I've needed to finish my rc build, an to build my own future rigs. You're what the rc hobby needs and has been missing. Happy belated Thanksgiving.
Well its your imagination that's how things start, now its a brand you made, lets call it the "Waffles RC Lowboy trailer" or something like that. And it looks good so far can't wait to see it done👍😁
I love it, it's different and unique. I try to watch as you post them. One of my girls is into rc's also like me. She watches with me and says daddy we can do it also, i told her maybe one day. Keep up the great work.
Happy belated Thanksgiving day. From the UK 🇬🇧 I like the rear end of the trailer couldn't really see it when it was on the bench but as soon as you put it on the ground I did and I would keep it how it is. I'm still amazed at how it's taking shape. That's going to be a heavy combo when fully loaded. Yes, we always watch until the end. Keep up the great work 👍
As soon as I found your channel, I had to subscribe. I love your content and attitude. I am a 45 year old plumber who you just got me looking into a welder and thinking and drawing up ideas. Thank you
Happy thanksgiving, Thank you for great content keep up with great work. I been watching from the beginning and I don't comment much but totally enjoy watching every video.
I’m all for getting the kids into the rc hobby it’s a fun outdoors type hobby and it makes memories that’ll last a lifetime, my grandfather got me into classic antique tractors and trains, my dad got me into rc trucks and helicopters so I’m still basically a kid at heart lol
I would not expected anything less than what I now withnessed, out of this world. those wheel sets our outstanding As for the Truck, you have your Job cut out for you, I am stunned, Thanks for inviting me once again, I am a Fan.
Thank you very much! I tried to message you on Instagram but I don't know if it was you. If you email me at wafflesrc2023@gmail.com I have an idea to run past you.
You could add a skid plate to the truck to help keep it from getting high centered. You would probably have to turn the entire bottom of the trailer into a skid plate to help with that too
I figured you would go with drop down ramps to the back, and low profile fenders over the tires so the vehicles could drive over them, or even be parked on them.
Thank you so much I was originally inspired by your Tacoma build. Even though I’ve been putting it off because it’s still pricey and I can’t really put the money or area for a tenth scale together but I have a 1:24 and am now custom building a 2nd. As well as all the trailers I built for the first one. Thanks for all the inspiration.
Great look with the extra inside dual wheels. How about a longer remote operated ramp? Amazed how much progress you make every week. Happy Thanksgiving.
Happy belated thanksgiving to u an your family as well and me an my two year old son watch your videos together also and I’m making him a Traxxas hauler piece by piece because I live on ssi so by time he’s older he will have his own rc that I made for him but i glued myself to rims and tires all the time so I know how you feel brother
Been wanting to build a peterbilt like my dad's and you've almost convinced me to just do it. My weakness is the electronic side of it. Not familiar with that stuff
@WafflesRC-pb4nt I have a couple of older axial deadbolt and my son loves running them we just have the basic rtr setup. They have been giving some electric gremlins. Appreciate the reply.
Oh i hate the gremlins!!! I will say when that has happened to me, check all of the electrical connections for corrosion on the contacts. If there is the try to clean it off. That helped with one of mine after alot of water
Great build it's a heavy one for sure maybe try some kind of sliders under the trailer sides for getting over things or add a way to raise and lower the rear tires like the trailers with air ride can't wait to see it all done awesome build
Hey, love watching your builds. I really love the buggy build. Was wondering if you could put a link in the comments for the axles you are using for it. Thanks
If your talking about the red jeep, I am actually planning on getting rid of those axles. They are too bulky. They are just AR60 axles that I put steering knuckles on the rear.
Hi from Canada .Grate jod and I am happy to be a sub to your channel and I am going to get a welder and make my own rc frames in the new year and it is all your fault LOL. And thank you for cutting the cheap trailer axles now I can cut the two on my trailer and widen them so I can add some width to the trailer to better fit my tiny trucks. So again love the channel and thanks for sharing your videos with us.
I think to help structure you could run two rails 3/4” off the deck 1.5” apart with supports welded to the deck. Kind of like if you were to turn your other big trailer upside down.
I think you are being a bit hard on yourself, the trailer is pretty spot on to a real one. Except for the neck its pretty much identical to the trailer I linked in a comment on your last video. They don't generally have much of a ramp on these style trailers because the stuff you load has really big tires or like an excavator can pick itself up high enough to walk on. I still think a little more stiffness and the trailer will hold you just fine.
I'd call you wheel, tire, axle combo thing a truck. On an overhead crane the scrub that that rolls on the runway that the bridge girder attaches to is called an end truck. This looks kind like a rubber tired version of that. We'll call it a truck truck.
Hey man, i have an Idea fir you to make a dually. If you are interest you can write me to give you my idea in using. Whit this you can make it whit all size of wheel
First off been lov8ng your videos but I'm watching a rc video of a small scale rc that lo9ks al9t like that Australia build you did thought it was was mentioning to you that it looks like they copied your truck
I love it. If I recall correctly I glued myself to my desk in fourth grade. I turned 65 this year. Thank reminding me ... Good times.
Thank you for all you do
It's so nice watching you build your Rc it keeps me glued to your mayhem 😊
Should have seen my son's face 😂
His confidence is Sky high ✨️
I'm loving it
again thank you for all your hard work!
That's so awesome!!! Like I said your story stuck out to me and I love hearing that he wants to build one!
Love the tail lights super cool👍👍
Hey waffles, I started watching your RUclips channel recently. You're giving me inspiration and the little push I've needed to finish my rc build, an to build my own future rigs. You're what the rc hobby needs and has been missing. Happy belated Thanksgiving.
that rear steer rc is so awesome, i wish i had the means to built a rig
Thank you for making great builds and try teaching us how to make something...
Almost 45kg is a heavy Rc... Hug's from Portugal 🇵🇹
Just super cool dude I would’ve never thought of that, making them axles like that👍👍
Well its your imagination that's how things start, now its a brand you made, lets call it the "Waffles RC Lowboy trailer" or something like that. And it looks good so far can't wait to see it done👍😁
Thank you very much!!
❤
15:01 climbs the stairs like a champ!
That is so cool. Looks like it’s going straight love the rig.👍👍
Man I love watching your videos you are so cool the things you can be up most people can only dream of thank you for sharing these built with us 👍🦃👌🛻
Happy Thanksgiving! New day, New awesome video!
I love it, it's different and unique. I try to watch as you post them. One of my girls is into rc's also like me. She watches with me and says daddy we can do it also, i told her maybe one day. Keep up the great work.
Happy belated Thanksgiving day. From the UK 🇬🇧 I like the rear end of the trailer couldn't really see it when it was on the bench but as soon as you put it on the ground I did and I would keep it how it is. I'm still amazed at how it's taking shape. That's going to be a heavy combo when fully loaded. Yes, we always watch until the end. Keep up the great work 👍
Thank you very much for watching all the way through!!
When it comes to scratch built rc's your one of the best brother 👍 you rock!! Hope you had a great Thanksgiving awesome video 😀
Going to be nice . All steel beast
Great job 😊
As soon as I found your channel, I had to subscribe. I love your content and attitude. I am a 45 year old plumber who you just got me looking into a welder and thinking and drawing up ideas. Thank you
Happy thanksgiving, Thank you for great content keep up with great work. I been watching from the beginning and I don't comment much but totally enjoy watching every video.
excellent work #242bahamas
Always love your videos man
👍👍 yeah the beauty of the RC community super cool dude 7000 subscribers👍👍
It's looking great so far thanks for sharing 👌 👍
I’m all for getting the kids into the rc hobby it’s a fun outdoors type hobby and it makes memories that’ll last a lifetime, my grandfather got me into classic antique tractors and trains, my dad got me into rc trucks and helicopters so I’m still basically a kid at heart lol
Good job can't wait for the next video Bravo Zulu
The trailer is looking good man keep up the good work
I like it well, I’ll watch for the next one until then. Peace and chicken grease👀😁👍👍👋👋😎
Yeah, happy Thanksgiving. Hope you left room for dessert.😁 I’m here watching 3:34 PM Friday, November 29
I would not expected anything less than what I now withnessed, out of this world. those wheel sets our outstanding As for the Truck, you have your Job cut out for you, I am stunned, Thanks for inviting me once again, I am a Fan.
💯👍
Not sure if anyone said yet but the trailer piece is called a walking beam
Great video again
I love watching, I started my own competition chassis company around the same time you started doing videos. So I totally get where your coming from.
Thank you very much! I tried to message you on Instagram but I don't know if it was you. If you email me at wafflesrc2023@gmail.com I have an idea to run past you.
Happy Thanksgiving and the trailer looks great 👍
Thank you very much!! Hope you had a great Thanksgiving
As a fellow metal fusion technician......it's looking really great! Keep doing what you want and what you like!
Hope your turkey day was good, the axles hack was ingenious never woulda thought of that, can't wait for paint. Thanks for sharing
Metal step grippy tape. Sand paper tape for the end of the trailer will ensure good grip when loading the crawlers.
Ya I used skateboard tape on the other trailer and it was perfect
Waffles, You are a total vibe fr. Super chill
Thank you very much!
Sick builds it inspires me to create something of my own.
I may have a biased opinion here.... but i think you should haha
@ yeah I gonna build a frame for the Tonia Winnebago camper. Then a frame for my two hardbody Jeep.
You could add a skid plate to the truck to help keep it from getting high centered. You would probably have to turn the entire bottom of the trailer into a skid plate to help with that too
Hey guys, sorry I’m a little late. I slept it. I think it looks good. I am excited to see the it painted and everything getting put together
Happy Thanksgiving! Hope you had a good and restful week off. 🦃
Is your trailer is turning out Nice I like your bench grander
I figured you would go with drop down ramps to the back, and low profile fenders over the tires so the vehicles could drive over them, or even be parked on them.
I watch with my 3 year old son every time.
Thank you so much I was originally inspired by your Tacoma build. Even though I’ve been putting it off because it’s still pricey and I can’t really put the money or area for a tenth scale together but I have a 1:24 and am now custom building a 2nd. As well as all the trailers I built for the first one. Thanks for all the inspiration.
I'm very glad to help in any way!! I just prefer 1/10 but I feel it could all be transferable to 1/24 just with smaller materials
I think it's cool m8t
Congrats on 7k. Make the content people will come lol
Happy thanksgiving bubba!!! Glad to see another video and progress on this monster!!
Great look with the extra inside dual wheels. How about a longer remote operated ramp?
Amazed how much progress you make every week. Happy Thanksgiving.
Hello from Finland 🇫🇮 happy waffles rc friday 🥳😁👍
Hahaha thank you!!!
Happy belated thanksgiving to u an your family as well and me an my two year old son watch your videos together also and I’m making him a Traxxas hauler piece by piece because I live on ssi so by time he’s older he will have his own rc that I made for him but i glued myself to rims and tires all the time so I know how you feel brother
Appreciate you sharing your distraction😁👍👍
Been wanting to build a peterbilt like my dad's and you've almost convinced me to just do it. My weakness is the electronic side of it. Not familiar with that stuff
It's actually not as bad as you think. When I wire this one up after paint, I'll try to show in the video the basic set up
@WafflesRC-pb4nt I have a couple of older axial deadbolt and my son loves running them we just have the basic rtr setup. They have been giving some electric gremlins. Appreciate the reply.
Oh i hate the gremlins!!! I will say when that has happened to me, check all of the electrical connections for corrosion on the contacts. If there is the try to clean it off. That helped with one of mine after alot of water
Will look into it. Thanks
Hope you and your family had a great Thanksgiving keep up the great work
Same to you!!!
Great build it's a heavy one for sure maybe try some kind of sliders under the trailer sides for getting over things or add a way to raise and lower the rear tires like the trailers with air ride can't wait to see it all done awesome build
Hi there I was looking at your trailer are you not put a centre spine down the trailer this will help with any flexing in the trailer.
Ralph in the UK
Hey, love watching your builds. I really love the buggy build. Was wondering if you could put a link in the comments for the axles you are using for it. Thanks
If your talking about the red jeep, I am actually planning on getting rid of those axles. They are too bulky. They are just AR60 axles that I put steering knuckles on the rear.
Hi from Canada .Grate jod and I am happy to be a sub to your channel and I am going to get a welder and make my own rc frames in the new year and it is all your fault LOL. And thank you for cutting the cheap trailer axles now I can cut the two on my trailer and widen them so I can add some width to the trailer to better fit my tiny trucks. So again love the channel and thanks for sharing your videos with us.
I'm glad to support your new habit!!!
I think to help structure you could run two rails 3/4” off the deck 1.5” apart with supports welded to the deck. Kind of like if you were to turn your other big trailer upside down.
Nice very cool build s coming along perfectly 👌 👍 and that crawler u had with the rear steering is a wicked looking crawler nice ....
Thank you very much!!! That was my first piece together build so it needs to be redone now that I know how to do it better
I think you are being a bit hard on yourself, the trailer is pretty spot on to a real one. Except for the neck its pretty much identical to the trailer I linked in a comment on your last video. They don't generally have much of a ramp on these style trailers because the stuff you load has really big tires or like an excavator can pick itself up high enough to walk on. I still think a little more stiffness and the trailer will hold you just fine.
love it my man
I'd call you wheel, tire, axle combo thing a truck. On an overhead crane the scrub that that rolls on the runway that the bridge girder attaches to is called an end truck. This looks kind like a rubber tired version of that. We'll call it a truck truck.
Called Walking Beam Axles. I’ve done a few myself.
Those axle assemblies are called trunions.
Have you thought about picking up tig welding if you don’t already know how to and making your rigs out of aluminum?
First 🎉
What wheels and tires did you end up getting? Need enough to do a 3 axle setup 😅 don’t wanna spend $200 on just wheels and tires
They were cheap ones on Amazon but they were still pricey for that many. I think the wheels were 40 for a set of 4 and the tires were like 15 for 4
What 🤔 if you put a lil weight on front of the truck kinda like what them pulling trucks do in competition 🤷🏻
Where do you get the jacks for the rc
The jack stands I just got off of Amazon
@ do you know what brand
Hey man, i have an Idea fir you to make a dually. If you are interest you can write me to give you my idea in using. Whit this you can make it whit all size of wheel
First off been lov8ng your videos but I'm watching a rc video of a small scale rc that lo9ks al9t like that Australia build you did thought it was was mentioning to you that it looks like they copied your truck
Interesting... do you know who's video it was?