When I connect it all to laptop and obd2 i click mpps software it just says exit and start and then serial I click start and it gives me an error an closes
well i got MPPS working but i get no ECU info. Ive tried new cords and Ross tech works great. Im clicking on the correct ECU but it wont read. I click full k line and med speed ive also tried slow. i do this with a battery charger on the car.
Hi. Im trying to re map my passat. ECU 2.0 TDI Bosch EDC16u34. But it won't read or right! The time never starts at the bottom. Any help would be amazing. Thanks
Hi i have the mpps v13 and although my car is not in the list someone said might still read it but it just says ecu not found but has same make car with same engine in the list so im stuck
Can we start engin after reading ecu ? I mean can i use my car if remapping takes me a lot of time ? Also, can i use obd2 (not kess v2) to do this job, does every type of obd can make this job done ?
1. yes 2. not sure what your question is? 3. only cables that are supposed to read/write ecus. Examples are mpps v16, galletto fgtech v54, and best is kess v2 5.017.
Whenever I try to read ECU, I get an error saying security access denied, cars charged, ignitions on, power pack connected. I've had no luck googling the error, any advice?
It is normal for mpps v13, mpps v16 have security bypass, make sure you checkbox. And if it doesn't work, try at least hour on ignition, then plug mpps cable and read it.
Hello, Some vehicles may result in the adjustment of eeprom data such as injector coding, flash counters, adaptions etc. what are you referring to specifically and which ecu?
![How To Reflash YOUR ECU | Lesson 1 Of 4 [FREE LESSON]](http://i.ytimg.com/vi/5KdbEXYD224/mqdefault.jpg)
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
Thank you so much that is just what I was looking for.
how do i know which version of mpps i need for my specific ecu or does it even matter?
Hellp dear
I use mpps v18 for reading ecu
I m a beginner and i have a question please
When i use a cheksum and what it iq please
Thank you
Gud day sir how to add targeting for any brand of trucks and car
When I connect it all to laptop and obd2 i click mpps software it just says exit and start and then serial I click start and it gives me an error an closes
well i got MPPS working but i get no ECU info. Ive tried new cords and Ross tech works great. Im clicking on the correct ECU but it wont read. I click full k line and med speed ive also tried slow. i do this with a battery charger on the car.
@Viacheslav Martynenko I have not
Sometimes if you have vcds drivers installed it can interfere with the mpps cable
Hey I swapped out my 2010 Acura CSX K2.0Z2 engine with 2007 Acura TSX K2.4A2 engine I still have the OEM ECM can I use the mpps V16 to remap my ECM
0:17 I would use a regulated linear power supply. I wouldn't want to flash with an old charger it might have massive ac ripple and 50/60hz noise.
How did you manage to run MPPS v16 on Windows 10?
Maybe thats mpps v21
@@lipelego22 Nope. It's v16. Look in the bottom right corner where the software version is.
@@szabotihamer It works for me in Windows 10, I didn't have to do anything to make it work.
Use virtualbox
right click and go to compatability and you can change the OS per what the software requires
Hi. Im trying to re map my passat. ECU 2.0 TDI Bosch EDC16u34. But it won't read or right! The time never starts at the bottom. Any help would be amazing. Thanks
Know its been awhile trying to read a gri V16 it says “an error has occurred” then tells me to email support but they are no longer reachable
Hi i have the mpps v13 and although my car is not in the list someone said might still read it but it just says ecu not found but has same make car with same engine in the list so im stuck
can this adaptor read nissan 350z JDM? Will it only see bosch ecu? can the adapter f/w be flashed to read like vag KKL? thanks!
Hello any update stage 1 for VW Passat 1.8t AWT?
Will the mpps v22 work on GM gen 4 ecu
On my dta ecu. On the ignition table it says map not present what does that mean??
Hello sir, you used original MPPS license or a clone? What if my car is not in the list, any advice?
Thanks
I can read gm ecu e38 and bcm
How do I get the software for mpps I have the cd they sent but not working. I’m trying to use for American made vehicles
I got mpps v16 solution without Loader... Just plug in cable...start Mpps. Run.
Is there any risk of bricking during Read process or just write?
Depends on the ECU, but usually no risk with reading.
@labordemotorsport8788 thank you!
Can we start engin after reading ecu ?
I mean can i use my car if remapping takes me a lot of time ?
Also, can i use obd2 (not kess v2) to do this job, does every type of obd can make this job done ?
1. yes
2. not sure what your question is?
3. only cables that are supposed to read/write ecus. Examples are mpps v16, galletto fgtech v54, and best is kess v2 5.017.
Hi can you tell me if you can do it for Benz glk 2.1L diésel 2013 thank you
Hello, please contact us at Https://LMTuning.com.au
Whenever I try to read ECU, I get an error saying security access denied, cars charged, ignitions on, power pack connected. I've had no luck googling the error, any advice?
It is normal for mpps v13, mpps v16 have security bypass, make sure you checkbox. And if it doesn't work, try at least hour on ignition, then plug mpps cable and read it.
hey how do i know which control unit is the right one to read? Have a BMW E90 320d and 3 control units to choose from?
4 to choose from just hit read ecu I’d on them till it tells you which one gives you the vin number etc
Hey bro. Do you know any cheap equipment that can read and write ecu bosch 7.4.9 of peugeot 207i (206+) with obd2?
Kess v2
@@nstipet unfortunately Can't
@@reza524 What year is Peugeot?
@@nstipet peugeot 207i 2014 1.4 8v Ecu Bosch 7.4.9
@@reza524 I'll check tomorrow and let you know. I think I also have the original map from that model.
Hi can i ask when you upload a map does it change your eeprom settings etc skc
Hello,
Some vehicles may result in the adjustment of eeprom data such as injector coding, flash counters, adaptions etc. what are you referring to specifically and which ecu?
@@labordemotorsport me7.5
can you make a video showing how to remove tprot ?
how do you read on bench ? got any videos on that ? I have ktag clone
I ID my ECU but while reading the ECU I got an error "no data found" BTW my car drives like crap