Fan va grym du är. Jag har också en pegga 206a, som jag kopplade in en likadan stereo i, fast jag gjorde någon felkoppling, då radion alltid är igång, oavsett om jag har stäng av bilen och tagit ur nyckeln. Men nu ska jag göra lite ändringar där. :) Tack!
How did you get the DAB antenna wire to the radio frame? You show how to get the receiver behind the panel, but you don't actually show how to run the cable from there to the radio
Hello Mr Will you tell me which two wires are to control the radio from the steering wheel, cube colors (key 1 + key 2) wires from the steering wheel to the ankle?
On almost every aftermarket stereo, you will need one +12v battery, one +12v @ key-on and one ground. On the original harness, +12v = blue wire, +12v key-on = yellow. Ground = yellow/green. The other wires are for steeringwheel functions and clock display, the new stereo will work without them.
JustRandom Cars&Urbex the blue and the red must to be unabled cuz if i disable they the car functions doesnt work or the wiper washer turns on automaticaly and doesnt stop 😂, so i conect the yellow of the stereo with the blue and the red original harness, the the black with the yellow/green and the red of the stereo with one of the 3 yellows of the original harness is this ok?
Witam Pana czy podpowie Pan które dwa przewody są do sterowania radiem z kierownicy, kolory na kostce ( key 1 + key 2 ) przewody z kierownicy do kostki ? będę wdzięczny Ryszard
one question, how can I turn on the radio after I turn on the ignition, but leave the key in the ignition to stay on? can you give me an explanation why it doesn't stay on until I take the key out of it?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
حبيب كلبي الغالي عاشت ايدك
سوينا كروب احنا والشباب كروب تجمع بيجو العالم وماقصرت فيديو مفيد بس شويه يعني الكوالتي تعبان وارجو الاستمرار وهاي بوسة الك يا طيب
Fan va grym du är.
Jag har också en pegga 206a, som jag kopplade in en likadan stereo i, fast jag gjorde någon felkoppling, då radion alltid är igång, oavsett om jag har stäng av bilen och tagit ur nyckeln.
Men nu ska jag göra lite ändringar där. :)
Tack!
Gött, hoppas klippet hjälpte dig hitta problemet👍
Does the removal tool come with the radio or you buy it?
How did you get the DAB antenna wire to the radio frame? You show how to get the receiver behind the panel, but you don't actually show how to run the cable from there to the radio
Nice but for my radio I need a wire with 12Volt when the (head) lights go on in order to dim the display.
Can't find such a freaking wire ....
Do you need an adaptor harness my 206 is 2003 year. And want to put new stereo in.
buying a 2003 model in a few days. did u need an adaptor or was std iso enough
very clear video an very helpful
Thank you! 😃
can i use electrical tape to isolate the wires? i don't have the torch
Hello Mr
Will you tell me which two wires are to control the radio from the steering wheel,
cube colors (key 1 + key 2)
wires from the steering wheel to the ankle?
I've the same problem man
So you can use AUX????
other videos suggest running a 12V + main feed from the fuse board. Why is this? Original cable too thin?
Profesonal good job. Maybe somebody will want to instal orginal radio RD3
Many thanks. Many many thanks!!!!
How can i remove the second radio?
But i have double cables togheder of +12 a red one and a blue, what do i have to do with the blue one?
On almost every aftermarket stereo, you will need one +12v battery, one +12v @ key-on and one ground. On the original harness, +12v = blue wire, +12v key-on = yellow. Ground = yellow/green. The other wires are for steeringwheel functions and clock display, the new stereo will work without them.
JustRandom Cars&Urbex thanks but there are 3 yellows cables, how do i know wich one is the 12v key on?
@@norbertg8 Just messure it, when you turn the key to acc then u will have +12v, when key is off u have 0v
JustRandom Cars&Urbex the blue and the red must to be unabled cuz if i disable they the car functions doesnt work or the wiper washer turns on automaticaly and doesnt stop 😂, so i conect the yellow of the stereo with the blue and the red original harness, the the black with the yellow/green and the red of the stereo with one of the 3 yellows of the original harness is this ok?
JustRandom Cars&Urbex i have almost done it but the stereo takes around 5min to turn off since i take the key off, is this normal?
Hey man, in 4'13min you explain about wires and their functions (greatjob), but also you wrote +30/+15 in blue/yellow wires. What is this numbers?
+15 = ignition
+30 = battery +
Vurdere å bestille en android skjerm til min Peugeout 206 CC fra Ali eller ebay. Er det å anbefale?
Why you dont use oryginal antena?
Professionnel
Key 1 & key 2?
MAMBO NO 5 !!!!
Came back here 2 years later. I still haven't changed my car radio. Lol.
M3.K3DO CON 3L ORIJINAL GRASIAS.
Hi, where do you get those pins to get the radio out? Thanks!
They come from an old radiokit, but u can use small skrewdrivers or thicker steelwires
Or here: www.amazon.com/SCOSCHE-DT1-Radio-Removal-Tool/dp/B0007TC9LW
@@justrandomcarsurbex3057 Thanks!
Witam Pana
czy podpowie Pan które dwa przewody są do sterowania radiem z kierownicy,
kolory na kostce ( key 1 + key 2 )
przewody z kierownicy do kostki ?
będę wdzięczny
Ryszard
don't need to re pin the conector as they work fine
Vilken stereo är det? :)
Det är en biltema, artikelnummer syns i videon😉
@@justrandomcarsurbex3057 tack för svar, såg det :D
one question, how can I turn on the radio after I turn on the ignition, but leave the key in the ignition to stay on? can you give me an explanation why it doesn't stay on until I take the key out of it?
😢