Wow!!! This was a very great broken down and Informative video! Now I feel more confident In giving this water mixing station a try for myself. Great Job bro. Thank you so much 👍🏾🙂
Slick setup. Did you swap out the stock 5/8 hose in the reel for the clear? Tired of tripping over my drain and fill hoses that never get tidied up in the garage, but want to use my existing 3/4”ID Clear-Flex 70NP hoses (40 feet each). That is if they can be adapted in the hose reel? I figure 40 feet of 3/4 would still fit in this 65-ft reel.
Looks good! One suggestion would be to use a block of polyurethane under the pump rather than plywood. It will not swell/rot if it gets wet and also will help reduce vibration noise when pump is running.
Reason I didn’t do that is because it would have made the whole piece stick out way too far. To isolate it is actually simple just replace the $5 bulk head as there is unions in either direction.
The T piece coming out of the mixing barrel bottom could be turned 90 degrees. This would give you pump inlet to the right and outlet to your hose on the left hope this makes sense Enjoying the videos
I like that idea of the 45’s at the bottom but I would point the 45’s up a bit so it will return the water up more instead of in a circle at the bottom of the tank.
This is an awesome video! Thanks so much for sharing! I'm building a very similar mixing station and my Ace Roto Mold tanks seem to have the same 5" diameter opening as yours. I totally get why you need to build the in-tank mixing piping from the bottom up... but my question is: how the hell did you manage to glue it all together? That 5" opening seems way too small to maneuver and to have all the pieces fit. Please advise if at all possible. Thanks in advance!
Honestly I even impressed my self being able to glue it all with such a small opening. The key was inserting the bottom mixing bar first without the pvc that comes up. While holding it inside with one hand I applied glue then inserted the long piece.
Made my own much simpler than yours using Brute trash cans, but it does the job and I have one of the containers on casters so when it gets hot in the summer I can bring it inside before doing a WC because it gets hot in my garage.
Why use all the blue pipe? Why not just use regular schedule 80 pipe fitting and such? You could get slip covers showing flow and what is what all the pipe and fittings for the price you paid for all that crap! Unless it’s all giving to you from suppliers!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Wow!!! This was a very great broken down and Informative video! Now I feel more confident In giving this water mixing station a try for myself. Great Job bro.
Thank you so much 👍🏾🙂
😊🤙🏼
Looks good great video. Definitely encouraged me to do a mixing station once I finish and install my sink
Slick setup. Did you swap out the stock 5/8 hose in the reel for the clear? Tired of tripping over my drain and fill hoses that never get tidied up in the garage, but want to use my existing 3/4”ID Clear-Flex 70NP hoses (40 feet each). That is if they can be adapted in the hose reel? I figure 40 feet of 3/4 would still fit in this 65-ft reel.
Looks good! One suggestion would be to use a block of polyurethane under the pump rather than plywood. It will not swell/rot if it gets wet and also will help reduce vibration noise when pump is running.
I was also gonna comment putting something under that pump in case it vibrates
Do you have a GFCI outlet behind the tank? If not you probably should.
did stay to the end, thanks for the instructions on how you did this👍
Very kool!!! TY
Looks good. I would recommend putting a ball valve coming of the tank bulkkead. If you have a manifold break you can isolate the tank.
Reason I didn’t do that is because it would have made the whole piece stick out way too far. To isolate it is actually simple just replace the $5 bulk head as there is unions in either direction.
Looks awesome!
What did you make the stand out of? Is it 1x4?
The T piece coming out of the mixing barrel bottom could be turned 90 degrees. This would give you pump inlet to the right and outlet to your hose on the left hope this makes sense Enjoying the videos
Great job man.
I like that idea of the 45’s at the bottom but I would point the 45’s up a bit so it will return the water up more instead of in a circle at the bottom of the tank.
Wooooow very cool
This is an awesome video! Thanks so much for sharing! I'm building a very similar mixing station and my Ace Roto Mold tanks seem to have the same 5" diameter opening as yours. I totally get why you need to build the in-tank mixing piping from the bottom up... but my question is: how the hell did you manage to glue it all together? That 5" opening seems way too small to maneuver and to have all the pieces fit. Please advise if at all possible. Thanks in advance!
Honestly I even impressed my self being able to glue it all with such a small opening. The key was inserting the bottom mixing bar first without the pvc that comes up. While holding it inside with one hand I applied glue then inserted the long piece.
What type of pump are you using?
Great video
Could you link where you got the sediment filter I can’t find on amazon
Water the plants huh?? Can we see the grow room 😂
Nice system bro...
😊
Planning on starting mine. Thanks for showing how you built. Thinking of something similar. Show us the end results when you’re done.
reefing and planes 😎
haha
What Model that you use for a pump
Mixing station has been on my mind for a while, I am just trying to find 40 gal tanks with an 8 inch lid
Ya the big lids are harder to find. The same company that makes mine makes a version that the whole top opens, so it’s like a 20” lid
@@eatsleepreef9565 Where did you purchase your container from?
Could I recreate this with brute trash bins just for budget reasons?
100000% 😊🤙🏼
Well done n very incite full!!!
Many people accidently breed mollies and guppies as their first fish bred.
Are you afraid of the power bricks heating your tank from underneath?
These get warm if anything. No where near to creat enough heat do that. Honestly I wish it would so I wouldn’t need a heater 🤣
Made my own much simpler than yours using Brute trash cans, but it does the job and I have one of the containers on casters so when it gets hot in the summer I can bring it inside before doing a WC because it gets hot in my garage.
i think if you switch your siporax media with rein biohome plus is way way more better..
Why use all the blue pipe? Why not just use regular schedule 80 pipe fitting and such? You could get slip covers showing flow and what is what all the pipe and fittings for the price you paid for all that crap! Unless it’s all giving to you from suppliers!