I really want to use cypcut instead of hypcut because it is easier and more convenient to edit, unlike hypcut which is very difficult to edit and customize
HypCut is suitable for large power, which added some functions that CypCut could not allow. Sure, HypCut needs more supports, like nesting software and BLT cutting head.
Hi Clara. When I first discovered your RUclips channel, I was impressed by the quality content and helpful information you provided. Your videos were a source of inspiration and valuable knowledge and I looked forward to each new post. Unfortunately, lately I have noticed a worrying change. The content you publish has become more and more devoid of substance. I've noticed that instead of focusing on providing useful and quality information, you've started posting videos that seem rushed without bringing any real value to your followers. It's sad to see a channel that had so much potential end up lost in this direction. I understand that posting frequency can be important to keeping an engaged audience, but it shouldn't come at the expense of quality. The posting of information of little utility disappointed me deeply and caused me to unsubscribe. I sincerely encourage you to return to your old good practices. I have always appreciated your attention to detail and dedication to providing valuable content. I suggest you focus more on the quality of your videos, even if it means posting less often. It is much more important to provide useful and relevant information than to constantly upload content that does not bring any value. I sincerely hope you take this feedback into consideration and rediscover your passion for creating quality content. The potential of your channel is huge, and it would be a shame to lose it in a sea of empty videos. I look forward to seeing the improvements and hope I can return to being a loyal subscriber.
Hi, there, sorry I don't know your name. Thanks for subscrbing my channel and keep focusing on me, it is a great support for me. If my videos could not offer you useful information, I feel sorry for that. Actually, apart from the first serveral videos, the rest videos, each of them is from the idea of viwers, either from comments or messages I got from mail or WhatsApp. My intention is not to waste any of anyone's time, if the video is not what you want to see, probably it is for freshmen who are beginners of industrial laser. You probably have been a real master in lasers, which most of my videos are not kind of guidance or solutions for you. Sorry I could cover all and meet your customized needs. You can tell me what content you need, please list specific issues, or I can meet your needs in future. I treat every video very seriously, and the content is also comprehensively measured. As for the combination of English and Spanish, I want to make it easier for more people in South America, or friends who know Spanish but not very good in English, to understand it. I will also produce the following contents at my own pace. Is it possible that you have grown too fast and find my videos boring? Then, I may have to congratulate you, because you may have already shined in the field of industrial lasers. This channel is not an authority in the field of industrial lasers, and I am still learning. If my existence can bring some use to this industry, especially to those friends who are learning about industrial lasers for the first time, I will be very successful. In this vast universe, it is a good and kind of romantic thing that we can share some content together when you don’t know me and I don’t know you. Love you! And thanks for You speak so directly. I like this way. I guess you are a very straightforward person like me. If you are in China, maybe we can become good friends. If you have any suggestions or opinions in the future, please tell me directly. I will be very willing to listen.
@@ClaraChai Thanks but I don't need free supplies. I came here for information. For example, I would like to know more about cutting nozzles. Single nozzle, double nozzle, speedy nozzle, when do I use the single nozzle when cutting with oxygen? what are the advantages what are the disadvantages? when do I use the double nozzle? how do we cut steel using air or nitrogen but obtaining the best cutting quality? It shows video examples of cutting with different nozzles but on the same material thickness. Explain the effects of a higher or lower focus and why this happens. Explain to us the approach to the piercing parameters depending on the thickness of the material and the power of the machine. What frequency should we use? How to avoid lens damage due to wrong piercing parameters. Explain to us how we can cut holes for countersunk screws! I know that some of these situations have already been explained. But I am willing to pay a higher amount for a subscription that contains well-structured information and to understand various phenomena or to train future laser operators. The possibilities of creating a really well-structured channel are enormous! I also find fragmented information on channels from India, Russia or America that I can capitalize on. But I think it's easier to find them in one place.
What you actually need is to see a material and know quickly and clearly what parameters, nozzles, and focus should be used to achieve the best cutting effect. How can I tell everyone the experience of a mature engineer for years with just a few short videos (no matter how much it costs)! However, we do have plans to set up a training center, which needs to be considered in the long run and will not be launched in a short time.
Hi thank you for the information I have bodor cutting machine that shows laser device alarms always running and the machine stops please say solutions
What laser alarms?
I really want to use cypcut instead of hypcut because it is easier and more convenient to edit, unlike hypcut which is very difficult to edit and customize
HypCut is suitable for large power, which added some functions that CypCut could not allow. Sure, HypCut needs more supports, like nesting software and BLT cutting head.
I use a Raytools controller, I didn't really like it because it doesn't have the same functions as Cypcut.
Agreed, to be honest, CypCut has been super mature compared to others. But it may also be that we are used to using it.
Hi Clara. When I first discovered your RUclips channel, I was impressed by the quality content and helpful information you provided. Your videos were a source of inspiration and valuable knowledge and I looked forward to each new post.
Unfortunately, lately I have noticed a worrying change. The content you publish has become more and more devoid of substance. I've noticed that instead of focusing on providing useful and quality information, you've started posting videos that seem rushed without bringing any real value to your followers.
It's sad to see a channel that had so much potential end up lost in this direction. I understand that posting frequency can be important to keeping an engaged audience, but it shouldn't come at the expense of quality. The posting of information of little utility disappointed me deeply and caused me to unsubscribe.
I sincerely encourage you to return to your old good practices. I have always appreciated your attention to detail and dedication to providing valuable content. I suggest you focus more on the quality of your videos, even if it means posting less often. It is much more important to provide useful and relevant information than to constantly upload content that does not bring any value.
I sincerely hope you take this feedback into consideration and rediscover your passion for creating quality content. The potential of your channel is huge, and it would be a shame to lose it in a sea of empty videos. I look forward to seeing the improvements and hope I can return to being a loyal subscriber.
Hi, there, sorry I don't know your name. Thanks for subscrbing my channel and keep focusing on me, it is a great support for me.
If my videos could not offer you useful information, I feel sorry for that. Actually, apart from the first serveral videos, the rest videos, each of them is from the idea of viwers, either from comments or messages I got from mail or WhatsApp.
My intention is not to waste any of anyone's time, if the video is not what you want to see, probably it is for freshmen who are beginners of industrial laser. You probably have been a real master in lasers, which most of my videos are not kind of guidance or solutions for you. Sorry I could cover all and meet your customized needs.
You can tell me what content you need, please list specific issues, or I can meet your needs in future.
I treat every video very seriously, and the content is also comprehensively measured. As for the combination of English and Spanish, I want to make it easier for more people in South America, or friends who know Spanish but not very good in English, to understand it.
I will also produce the following contents at my own pace. Is it possible that you have grown too fast and find my videos boring? Then, I may have to congratulate you, because you may have already shined in the field of industrial lasers.
This channel is not an authority in the field of industrial lasers, and I am still learning. If my existence can bring some use to this industry, especially to those friends who are learning about industrial lasers for the first time, I will be very successful. In this vast universe, it is a good and kind of romantic thing that we can share some content together when you don’t know me and I don’t know you. Love you!
And thanks for You speak so directly. I like this way. I guess you are a very straightforward person like me. If you are in China, maybe we can become good friends. If you have any suggestions or opinions in the future, please tell me directly. I will be very willing to listen.
And please tell me your address and the nozzles you use most, I'd like to give you free 10, free shipping to you address.
@@ClaraChai Thanks but I don't need free supplies. I came here for information. For example, I would like to know more about cutting nozzles. Single nozzle, double nozzle, speedy nozzle, when do I use the single nozzle when cutting with oxygen? what are the advantages what are the disadvantages? when do I use the double nozzle? how do we cut steel using air or nitrogen but obtaining the best cutting quality? It shows video examples of cutting with different nozzles but on the same material thickness. Explain the effects of a higher or lower focus and why this happens.
Explain to us the approach to the piercing parameters depending on the thickness of the material and the power of the machine. What frequency should we use? How to avoid lens damage due to wrong piercing parameters.
Explain to us how we can cut holes for countersunk screws!
I know that some of these situations have already been explained. But I am willing to pay a higher amount for a subscription that contains well-structured information and to understand various phenomena or to train future laser operators.
The possibilities of creating a really well-structured channel are enormous! I also find fragmented information on channels from India, Russia or America that I can capitalize on. But I think it's easier to find them in one place.
What you actually need is to see a material and know quickly and clearly what parameters, nozzles, and focus should be used to achieve the best cutting effect. How can I tell everyone the experience of a mature engineer for years with just a few short videos (no matter how much it costs)!
However, we do have plans to set up a training center, which needs to be considered in the long run and will not be launched in a short time.