Hey Rui! Great review! I have the A5 model and the biggest problem with it is the poor stability of the Z axis because of the movement between the gantry and the base. I solved it using small 90 ° brackets (four in all) and fixed it with screws to end this oscillation. I had to make small holes, but it solved my problem. As for the wobbling of the screws, the problem is with couplers that arrive out of center or bent. I suffered a lot from it here. After disassembling the two axles, I checked that the screws are perfect and what causes this oscillation is even the couplers and poor centralization of the flat bar fixation at the top of the gantry. Thanks for the video, I was waiting for him to know your opinion!
Nice job, Sandra.. looks like this printer has quality issues that will be very difficult to resolve ( frame movement ) . Not impressed with it. Thanks for the review.
Another great video from ruiraptor. Thanks. This printer just looks like one to avoid even for free. It amazes me every time I see a printer sent for review from the manufacturer that has not been tested like this one exhibits with the SD card reader issues. But even if it was it still suffers from very poor design. Flimsy sheet metal, poor construction and that extruder. What were they thinking? I genuinely feel bad for anyone that bought one of these.
Does anyone have any good suggestions for a printer? I was going to purchase this one but watching this and reading a few different reviews from places i'm not so sure. I have had the Anet A8 for a couple of years which was meant to be a couple of months just to test if I wanted a proper one, I do. and now two years on I still haven't got one... I want one for less than £500 realistically, but unsure if there is a repeatedly reliable printer for this price? One which is easy to level and doesn't come as a DIY pack cause I just feel there is more to go wrong. Or maybe a low price commercial one that comes fully built? I'm unsure to be honest, but if anyone has any suggestions it'd be greatly appreciated!
@@ruiraptor tenho visto muitos vídeos porque ando a procurar a minha primeira impressora e ainda não encontrei nem vou encontrar uma que não tenha algo pior em comparação com outra enfim... Os teus vídeos são bons👍 e o facto de ser uma senhora a montar as impressoras cala muitos brasileiros que até se queixam da dificuldade de passar de 230v para 110v em algumas impressoras ou com o tipo de parafusos😂
This printer one should avoid. Parts are very hard to change out and are not quality. Customer service is extremely difficult to deal with. I finally had to use mine for parts.
![FORTNITE CLASSICS IS BACK! Fortnite Item Shop [November 15th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/RbQURbeFwqs/mqdefault.jpg)
So glad I saw this, I was going to order one just because it was cheap but now realise that cheapness and quality don’t usually go together.
Hey Rui! Great review! I have the A5 model and the biggest problem with it is the poor stability of the Z axis because of the movement between the gantry and the base. I solved it using small 90 ° brackets (four in all) and fixed it with screws to end this oscillation. I had to make small holes, but it solved my problem. As for the wobbling of the screws,
the problem is with couplers that arrive out of center or bent. I suffered a lot from it here. After disassembling the two axles, I checked that the screws are perfect and what causes this oscillation is even the couplers and poor centralization of the flat bar fixation at the top of the gantry. Thanks for the video, I was waiting for him to know your opinion!
would you recommend this printer after fixing it? or would you go with a ender pro 3?
Mau kumpulin mahasiswa yang kesini gara gara pre test Praktikum Terintegrasi
Great review. I love all the details of the machine you show.
Nice job, Sandra.. looks like this printer has quality issues that will be very difficult to resolve ( frame movement ) . Not impressed with it. Thanks for the review.
Another great video from ruiraptor. Thanks. This printer just looks like one to avoid even for free. It amazes me every time I see a printer sent for review from the manufacturer that has not been tested like this one exhibits with the SD card reader issues. But even if it was it still suffers from very poor design. Flimsy sheet metal, poor construction and that extruder. What were they thinking? I genuinely feel bad for anyone that bought one of these.
One to avoid then. Pity as on paper it looks good but for £350 UK I'd expect more. Great review as normal guys
Great review as always
Thanks for sharing :-)
I bought an A5, nothing but issue after issue...go for the Artillery sidewinder X1 instead a much better printer
My display is blue and not showing anything help?
Does anyone have any good suggestions for a printer? I was going to purchase this one but watching this and reading a few different reviews from places i'm not so sure. I have had the Anet A8 for a couple of years which was meant to be a couple of months just to test if I wanted a proper one, I do. and now two years on I still haven't got one... I want one for less than £500 realistically, but unsure if there is a repeatedly reliable printer for this price? One which is easy to level and doesn't come as a DIY pack cause I just feel there is more to go wrong. Or maybe a low price commercial one that comes fully built? I'm unsure to be honest, but if anyone has any suggestions it'd be greatly appreciated!
I think you need to upgrade the firmware. please make a new video showing how it is after you upgrade the firmware
Yay! A Sandra episode
Did you use the cura profile? Or other slicer?
Hi, we used Cura and S3D with our tests.
@@ruiraptor same here . I believe there retractions are quite hard to tune up when using pteg
wow that a big 3d printer
Recomendas esta impressora?
Boa tarde, os resultados não foram muito maus mas, na nossa opinião, existem modelos melhores.
@@ruiraptor tenho visto muitos vídeos porque ando a procurar a minha primeira impressora e ainda não encontrei nem vou encontrar uma que não tenha algo pior em comparação com outra enfim... Os teus vídeos são bons👍 e o facto de ser uma senhora a montar as impressoras cala muitos brasileiros que até se queixam da dificuldade de passar de 230v para 110v em algumas impressoras ou com o tipo de parafusos😂
This kind of leveling for the Z-axis doesn't make sense, it will cause many problems, you need to use 2 z-endstops and 2 z-steppers
Many issues, bad printer but good video. 👌
This printer one should avoid. Parts are very hard to change out and are not quality. Customer service is extremely difficult to deal with. I finally had to use mine for parts.
the worst printer in the world
Why? I have one since yesterday and the first print was perfect