I have both. There are pros and cons too both. Read below: Pros SBA3 -The QD attachment is in a perfect place for me. Does not get in the way of of my cheek weld when using a sling. SBA4 - More rigid and stiffer than the SBA3. Cons SBA3 - The rear lower of the brace is somewhat flexible and can overlap each other unevenly. (They make velcro straps to correct this now) Not as stiff and rigid and the SBA4 overall. SBA4 - The QD attachment is in a terrible location. Gets in the way of a good cheek weld on other side. Just my 2 cents.
Hi, thanks for your input. Do they have another option or mount point for sling if you didn't want to use what is on the a4? Something external you can attach? Thanks
On the A4, are the two added struts stiff like polymer stiff? Or like there’s a polymer rod in them? Or are they flimsy and foldable like the regular A3 rubber?
Just curios,, the SMA4 AR appears to have a SME/Flash hider. I have SME on both AR 10.5" pistols. Significant sound suppression having measured 100 dbz max. with their use. That's roughly 85 dbz reduction. I went with the SBA4 for the wide cheek well after having 1st seen this video. I've subsequently ungraded both 10.5" Pistols, 7.62x39 with H3 (5.4oz) buffer weights; a southpaw having both left and right hand side charging pistols (one for Tonto) I'd like the brass going downrange range rather than into my breast pocket or BVDs, should I adopt a two gun approach, in the absence of Tonto.
A4 may exceed 13 1/2 pull length ATF rule for a pistol! Wise Men Company has a replacement strap that will solve that rubber lap on the A3 it comes in different camo colours to match newer pistols.🤙😎
Sb tactical sells the length of pull limiter. I made a mistake of trying to cut my buffer tube because i have law tactical folding adapter and i messed up big time.
Thank you! I subbed and liked, good content! Clear concise and informative. I’m looking to get a brace but they only have gray in stock and I want black for my build lol I was debating on wether I should wait until black is back in stock or just grab gray I have an issue with the whole FOMO thing 😅
Thank you!!! I’ve been searching all morning for what’s the difference in an SBA and an SBM. Lol, I was going crazy. Can’t believe a random 3 year old RUclips comment was more helpful than Google was lmao. Thanks for this.
It’s amazing how many people mentioned the wisemen splitfix. So y’all are really spending $25+ for a Velcro strap you could probably get at you local craft store for like a buck? I’m curious, do you also pay people to kick you in the balls?
I have both. There are pros and cons too both. Read below:
Pros
SBA3 -The QD attachment is in a perfect place for me.
Does not get in the way of of my cheek weld when using a sling.
SBA4 - More rigid and stiffer than the SBA3.
Cons
SBA3 - The rear lower of the brace is somewhat flexible and can overlap each other unevenly. (They make velcro straps to correct this now)
Not as stiff and rigid and the SBA4 overall.
SBA4 - The QD attachment is in a terrible location.
Gets in the way of a good cheek weld on other side.
Just my 2 cents.
Hi, thanks for your input. Do they have another option or mount point for sling if you didn't want to use what is on the a4? Something external you can attach? Thanks
@@johncarlos7810 You could get a qd endplate to attach your sling to.
For me and my sling usage, QD placement on the 4 is all wrong.
On the 3 it is "just right"!
This was really helpful thanks. Considering ordering the 4 and convinced it's the one...much beefier, reinforced with the triangular piece, etc.
Glad I could help.
ATF is just ridiculous.
Well yeah. Lol
Which one is more comfortable when accidentally shouldering?
A4 to me. Accidentally of course
Optics Planet have these braces on sale till 4/21 for $104!! Im picking one up. Thanks for the comparison. Im goin with the A4
Good deal. Glad I was able to help you decide!
audience clapping loudly 👍👍👍👍👍 some sissy tossed a bundle of roses
Thanks for watching.
Pick up the sba3 split fix from wisemen company. It'll fix your problem with the sba3 brace.
Thanks for the tip
Yeah, split fix for the win. I bought a few a while back. Totally solves the only issue with the SBA3. I think the SBM4 looks too bulky.
On the A4, are the two added struts stiff like polymer stiff? Or like there’s a polymer rod in them? Or are they flimsy and foldable like the regular A3 rubber?
IMO there are stiff and sturdy. Like an underwire bra...well supported DD.
Just curios,, the SMA4 AR appears to have a SME/Flash hider. I have SME on both AR 10.5" pistols. Significant sound suppression having measured 100 dbz max. with their use. That's roughly 85 dbz reduction.
I went with the SBA4 for the wide cheek well after having 1st seen this video.
I've subsequently ungraded both 10.5" Pistols, 7.62x39 with H3 (5.4oz) buffer weights;
a southpaw having both left and right hand side charging pistols (one for Tonto) I'd like the brass going downrange range rather than into my breast pocket or BVDs, should I adopt a two gun approach, in the absence of Tonto.
SBA3 FTW
i made something similar out of 2x4 and duck tape.
A4 may exceed 13 1/2 pull length ATF rule for a pistol! Wise Men Company has a replacement strap that will solve that rubber lap on the A3 it comes in different camo colours to match newer pistols.🤙😎
A4 on my ar is still under 13.5” at full extension. Suppose it matters what the host it
You can always expoxy or weld up the last hole or two on the buffer tube if you have this issue.
Sb tactical sells the length of pull limiter. I made a mistake of trying to cut my buffer tube because i have law tactical folding adapter and i messed up big time.
Just what I needed to see. Thanks!
Glad I could help!
My joint broke on my sb3 I’ll be getting the a4
Sorry to hear that. I could see the a4 being more beefy.
What kind of handguard is on the gun with the suppressor?
It's the factory rail that PWS includes on the MK111 Mod2 guns.
I would be curious to know if the SBA4 has a length of pull that meets the rules requirements.
Have both, SBA4 is far better.I was surprised how much I disliked the SBA3
I’ve also recently tried a gear head works tailhook that’s gone well too.
Who made the upper and lower on that A1 style 11.5?
Lower is a machine gun made from an 80% and the upper is from brownells with a ballistic advantage barrel
are those black or gray?
Black, studio lighting is making it brighter
Thank you! I subbed and liked, good content! Clear concise and informative. I’m looking to get a brace but they only have gray in stock and I want black for my build lol I was debating on wether I should wait until black is back in stock or just grab gray I have an issue with the whole FOMO thing 😅
What light is that??
does anyone ever actually put the brace ON their forearm or is it just an ATF workaround?
Shhhhhhhhhh.
You know the answer.
🤫
Boy, this comment did not age well 😅
No one shoulders these. It’s a myth. Absolutely use this as a brace.
@@AVH8TORI hold it with my feet
They are 2 very different braces the sba4 is an adjustable sbm4 brace
Thank you!!! I’ve been searching all morning for what’s the difference in an SBA and an SBM. Lol, I was going crazy.
Can’t believe a random 3 year old RUclips comment was more helpful than Google was lmao.
Thanks for this.
Lucinda Run
Rattle trap junk flock sb flock pas I want more for my 129.99 I on a mission budlight time flock tape an velcro
Thanks for watching
👍
Thanks for watching
Leaned on a barricade with an sba4 and it broke. That shit is trash.
Nothing they both will get cha a felony
It’s amazing how many people mentioned the wisemen splitfix. So y’all are really spending $25+ for a Velcro strap you could probably get at you local craft store for like a buck? I’m curious, do you also pay people to kick you in the balls?
If it was that simple, why didn’t you patent it, genius?
sb3 sucks piece of junk ! buy sb4 much better product !
Cliffs notes not cliff