I thought for a second they actually released a piece to do this to the Savi’s workshop lightsabers I like to see Savi’s make like a curved, Cross saber, double bladed (can be smaller for cost), and pikes I’d think that would boost their profits and give Star Wars fans a nice amount of options in terms of lightsaber customization on top of the already highly customizable Savi’s workshop lightsabers plus it be cool for fans of legends and hardcore fans such as myself to go there and make these custom lightsabers
Oi MasterThingW I agree with you fully, but unless it’s like a curved pommel, I highly doubt that that would work unless they create a curved base with curved, well, everything else
Is it possible to put more of a matte finish on your parts? I know krylon makes a "shiny" finish spray paint but I'm not sure folks will want to try painting while they aren't allowed to buy extra scrap metal.
@StarScripter you can buy a proper film quality mask, lowest I found was about 100 bucks, but the robes where custom made, the lightsaber I made using this video
@StarScripter the mask can be found on Ebay or Amazon, but real high quality ones can be bought at Disney starwars area, for the robes I use silk for inside for comfort, brown wool for the hooded robes, and bashe cotton or wool for the normal robes
What Galaxies edge needs in the future: more lightsaber customization options, more characters, basically saying that the area has entered some type of time conflux or something, allowing heroes and villains of old and new to appear. More attractions based on the conflict of light and dark and guests have full control on how it will end or something. It gives Disney and the imagineers a lot to play with.
doesn’t really work if you want to keep it canon. I do like the idea of the land updating every decade or so to keep up with the latest chronological stories. Plus, some separate parks and attractions across the Disney resorts that take place during different time periods would be rad
All the sense they have at savis are available in the Star wars fallen order gamebut they need to do like the game and allow us to mix-and-match all the parts from all the sets not restricted to a single set
Inferno Productions right? How cool would it be to have a yellow saber with Crossguard? Then again, we’d have a lot of people screaming Deus Vult because it reminds them of the crusades.
Maybe for the leather strap you can wrap it around the connector itself? That would cover up the clean metal look and would give you something to grip?
I would suggest epdm grip to wrap it , it's used for staffs and other prop use of flow artists and such . It's easy to apply and comes in a variety of colors plus it's pretty cheap .
Note: The threads on the connected pommels are aligned so that when tightened completely the activation switches should be aligned without any modifications.
I've only seen one metal folding connector on the market but it was for a custom sabrestaff that they make by commission. I don't know if they'd make one for a savi's sabre.
I’m anakin when it comes to red lightsabers Jedi: you get to build your lightsaber but we won’t give you a red crystal Me with a red crystal in my saber: what did you say?
Actually a red Kyber Crystal is made by making a Crystal “bleed” against it’s will, making it red. And a Jedi master, Stass Allie I think had a Red Lightsaber before the clone wars. She changed it to blue because of the Sith returning.
JFK it is also very rare but they can come naturally (in the new Vader comics we learn that he changed his kyber crystal from a bleeder one to a naturally formed one)
If anyone has connections to a leather worker, they might try to alter a mare's leg. The sabrestaff doesn't look to be much longer than the rifle a mare's leg is made to carry.
@@__DYLAN_ROBIN__ potentially, not sure if the threads would match though to be able to secure it, and a blade wouldn't be possible because the pommel is mostly solid on the end aside from the holes for the sound to come out of
Thank you for sharing. The Protection and Defense is my favorite option. You twirling the double lightsabers at the end was awesome. Could you imagine a connector pommel that allowed quad blades. That would be slick. I bet Sir James has four Savi Workshop lightsabers. Call the metal shop and ask them to build you one.
I think there was an etsy bay back then, it was a staff holder that had the staff hit aligned to your belt, I dont know if it will fit with Disney sabers as it was made for Ultra sabers. it used 'their' connection as an anchor point and then used to cups to hold the ends in place. think hook and loop but on a big scale.
I’m getting a saber like mauls it can be double sided or a single saber but I’m going to have mine able to split apart so I can have two sabers like Asoka Tano
One cool idea for a 3d printing for the pummel would be to make a "broken" piece and can add 2 or 3 small cords poking out and it could look like Cal's original lightsaber that got damaged.
Looks very impressive indeed. In the process of building my own Saberstaff, but mine will be from Saberdyne Industries. Do you have a favourite colour for the staff?
I really hope they find a way to make the Kylo Ren crossguard blades functional and compatible with the Savi sabers, either that or they could make separate similar pieces that can somehow be illuminated by the main blade itself, because that would be extremely great and add even more customization. It doesn't have to always be jutting straight put either, there could be options made to have them point horizontally up or down, and even have pieces that only let you use one like a forked lightsaber. But of course that's just *one* example. There are still many other possibke optipns regarding just the pieces alond like making it curved, foldable double bladed lightsaber, longer pieces to connect more and form a lightsaber pike, or even to have two blades close together from one side and emitter. Imagine how much more ideas people can come up with simply from making custom overlay parts! Sure some of it will be expensive, especially if they somehow shine the light directly into more blades from one emitter, but it's totally possible and worth it, especially since Disney for whatever reason isn't selling their separate scrap metal anymore, which is rather unfortunate. But hey, I'm sure other people can come up with more and better designs anyways. Maybe they can replicate the official ones as well or even make them look better with more paint and material options, especially if you want to make a hilt lighter. Maybe even if you want to replicate the design a Legacy lightsaber without having to pay for yet another separate piece or pieces. Just get two lightsaber cores and two main blades, and you're good to go.
Very cool!! But I think Disney should release official double bladed sabers for like 300 dollars and have each half smaller than the standard.I would make a double bladed,crossgaurd purple lightsaber, with the gold protection and defence pieces!
@Sir James Saw you Saturday in front of City Hall watching the parade and called out your name. My wife and I were on our way out to change into our tunics and get our sabers. Later we saw you and your friend who was wielding your double. My wife and I had a blast hiding from Kylo Ren and the Stormtroopers while interacting with the people of Batuu.
So, I recently bought myself a Savi's workshop lightsaber, and I love the thing.... HOWEVER, I am a huge nerd for polearms so the idea of a lightsaber pike has been something I NEEDED.... So what I'm wondering, is if I could theoretically get one of these couplers, and epoxy a PVC pipe onto the pommel connector and make myself a lightsaber pike attachment? Or is there better options to get what I want?
DUDE, DUUUUUUUUUUUUUUUUUUUUUUUUUUUUUDDDDDDDEEEEEEEEEEEEEEEE. *YOU'RE A LIFESAVER, EVERY TIME I WANT INFORMATION ABOUT SAVI'S WORKSHOP LIGHTSABERS, THERE'S ALWAYS YOU!* ;D
Looks great. Maybe a bit of good automotive paint on the connector, or if you have Power and Control (like I do) you can probably make some rubber grips and glue those into place.
I've wanted a blue saberstaff for a long time now, so I'm really glad I can finally do that! Right now I'm planning on making two Elemental Nature sabers with blue blades and then putting them together at Disney. As long as I can get like the +$400 I need to actually do this, then it's a definite that I'm going to do it
To be honest with you James I would have to modify a leather sword carrier to hold this on my back if you really want a practical way of carrying the saber staff. Or make a chest or waist rig for it.
To get them to align is a simple manufacture fix. Make TWO pommels instead of one that connects two sabers. The pommels will be threaded to align with each other straight. If you see the threads on Phoenician grinders (for weed) they lock and align perfect because of how they’re machined. Now for the two pommels on the end of each saber to stay connected and not unthread when clashing, add swing clamps on the outside. It also makes it easier to flick the clamp off, do a 180 twist, and now you can separate them effortlessly like in fallen order.
please make a short video on the process of putting the plumbers tape on specific parts of the hilt for those that are interested in doing that but don’t really know how
02:55 At least here where I live and work (Disney California) the reasons are quite simple. The state is requiring all boats that dock at Long Beach an expensive docking fee. Most manufactures of these parts are over seas and don't feel they should have to pay that much. Thus a back up of merchandise to the parks is floating out there in the seas hoping either party gives in first. In the light of all of this Disney has taken it on themselves to make sure that people shelling out $200 for the experience get the parts they need first than taking a chance that they may or may not sell the parts separately. You've got to understand, some of us haven't been to Galaxy's Edge and would rather be able to build our own light saber than buy the parts separately and to my knowledge they don't sell the cores on their own. So that leave tourist and people who can only enjoy Disneyland maybe once a year the experience only.
Even if you do attach the saberstaff to your belt, you can utilize the Power and Control emitter that has the d ring if you want to. That’d be cool if not too much weight.
I wasn't really sure about this one.. until you turned it on! I LIKE this ALLOT! The combination of blue and green is bad ass! I wasn't sure because it looks bulky. That, I can live with after seeing in action. I assume that these are the 28" blades you told me about yesterday? How long is it now, with the blades in? Very cool, indeed! After talking yesterday, I figured it wouldn't be long for the next video..but, Wow! That was fast! Your responses are fast too. Thanks for another great video there, Sir! 👍
That's really awesome holy cow! I was going to pick EN for my next build whenever I'm able to go again but now I may pick P&D. Really cool. (Nice song choice too)
Hey man I ordered mine on the 29th of December and I understand that new year's is a factor but it still says processing. How long did it take for yours to deliver? And how long do you think for me?
Are pummel pieces compatible with the emitter end of the saber. If yes I will put the rancor tooth on one end of the saber staff and the blade on the other giving me a saber pike
Me: oh man that's sweet! I need to build a second savi's lightsaber so I can do this!
My wallet: No
Preach it brother!
my wallet: more, give it to me!
I can’t even afford to get one
Kaileta Liyienn wallet brain cell two
Andrew Brandenburg why is this so true
Disney: _He’s too dangerous to be left alive!_
:)
The fans: *No. I need him.*
Disney: *screams intensly and falls*
Kept*
Disney: *Shoots Bull Shit Story Telling From Their Hands* POWER, INFINITE POWER!
I thought for a second they actually released a piece to do this to the Savi’s workshop lightsabers I like to see Savi’s make like a curved, Cross saber, double bladed (can be smaller for cost), and pikes I’d think that would boost their profits and give Star Wars fans a nice amount of options in terms of lightsaber customization on top of the already highly customizable Savi’s workshop lightsabers plus it be cool for fans of legends and hardcore fans such as myself to go there and make these custom lightsabers
That’s what i was hoping they had before i had any idea what it was
Now there is a website with good high quality lightsabers called saber force
Starwarsgeek 5782 *ALSO AN INQUISITOR DOOHICKEY*
James Ayars too expensive
Zenron yeah I know there pretty expensive but they are really good
This makes me want to do a temple guard cosplay
Wear a santa suit while spinning the saberstaff with a red blade and a green blade.
dArTh SaNtA
You: you should do something crazy
Me: yes
@@ell8711 *PALPASANTA*
YOU KNOW THE RULES AND SO DO I
Darth Clau
Disney: _In the name of the Galactic Senate of the Republic, you're under arrest_
I am the senate
Fixabledock1 123 it’s treason then
@@blitzbrawlerjackson6070 *BANSHEE SCREECH*
-temple guard silence-
@@Noble0563 ancient force scream.
Now to one-up this by making a connector that allows you to turn it from a saberstaff to a split-saber.
Hopefully they're named Kal Kestis
@@adude8216 could be named "Ventress" if the one who does it uses her curved hilt design
@@lordnul1708 When Ben drops the crossgaurd he'll feel like his name's basic
*Cal Kestis would like to know your location.*
They could use a similar mechanism to the blade connector
Definitely going to get pick one of those up once I get a second saber, but have to get my first saber before that
Yup
Now all we need is some crossguard compatible pieces to utilize the Kylo Ren blades and we're all good to go as far as practicality goes...
Zachary Jorgensen eh lightsabers can’t be practical
Alec Fisher how not? Serious question
Oi MasterThingW I agree with you fully, but unless it’s like a curved pommel, I highly doubt that that would work unless they create a curved base with curved, well, everything else
Imagine a double bladed curved cross guard lightsaber
@@BariBone they could do a curved hilt and make the base curved and add new pieces
Disney screwed up by not allowing to buy extra scrap metal.
It really does suck
Yea and if your really wanting them scrap parts people killing ya on Ebay for them.. $50 average.
I think u can. I remember reading bout it awhile ago.
You can you just need to ask for where they sell scrap metal
ODSTxGundam it’s $20 a part
Their should be a payment option for sabre staff and regular sabre and the employees can tell what pieces you need with a badge
Once I saw people were making customized parts for a Savi's lightsaber, I knew an end piece that made a double-bladed lightsaber was inevitable!
Thanks Sir James for showcasing my RENEVforge Savi's Workshop Saber compatible parts.
Is it possible to put more of a matte finish on your parts? I know krylon makes a "shiny" finish spray paint but I'm not sure folks will want to try painting while they aren't allowed to buy extra scrap metal.
@@kevinmoore2929 Yes, on the website there is an option for matte finish on the different pieces.
God those yellow kyber crystals look fucking awesome omg
I went to Disney 2 year and left a week before galaxy’s edge opened
Now I can really do my jedi temple guard cosplay next comicon
@StarScripter you can buy a proper film quality mask, lowest I found was about 100 bucks, but the robes where custom made, the lightsaber I made using this video
@StarScripter the mask can be found on Ebay or Amazon, but real high quality ones can be bought at Disney starwars area, for the robes I use silk for inside for comfort, brown wool for the hooded robes, and bashe cotton or wool for the normal robes
Hey James, could you do a tutorial on how to align the savi saber parts with plumbers tape?
What Galaxies edge needs in the future: more lightsaber customization options, more characters, basically saying that the area has entered some type of time conflux or something, allowing heroes and villains of old and new to appear. More attractions based on the conflict of light and dark and guests have full control on how it will end or something. It gives Disney and the imagineers a lot to play with.
doesn’t really work if you want to keep it canon. I do like the idea of the land updating every decade or so to keep up with the latest chronological stories. Plus, some separate parks and attractions across the Disney resorts that take place during different time periods would be rad
Orange kyber crystal plz
All the sense they have at savis are available in the Star wars fallen order gamebut they need to do like the game and allow us to mix-and-match all the parts from all the sets not restricted to a single set
*Sees more lightsaber customization* COUGH COUGH CROSSGAURD COUGH COUGH
Inferno Productions right? How cool would it be to have a yellow saber with Crossguard? Then again, we’d have a lot of people screaming Deus Vult because it reminds them of the crusades.
Maybe for the leather strap you can wrap it around the connector itself? That would cover up the clean metal look and would give you something to grip?
Rey not having her own custom lightsaber staff was a Darth Plaegius level tragedy. She should have searched the internets for your video.
I would suggest epdm grip to wrap it , it's used for staffs and other prop use of flow artists and such . It's easy to apply and comes in a variety of colors plus it's pretty cheap .
Note: The threads on the connected pommels are aligned so that when tightened completely the activation switches should be aligned without any modifications.
I am sure that it also depends upon how much wear the plastic hilt base has received.
Like how you got the rise of Skywalker music gonna at the end too!!!
Just wanna say your content is so pure, was having an awful day an now suddenly its 4am and I feel like a happy kid again. Loves ya lots❤
Can you make a video on modifying the Savis saber bags to fit 2 blades? I'd love to see it and would help me so much for my trip in a few years.
Also, is there a metal connector for the temple guard legacy sabers?
I've only seen one metal folding connector on the market but it was for a custom sabrestaff that they make by commission. I don't know if they'd make one for a savi's sabre.
I’m anakin when it comes to red lightsabers
Jedi: you get to build your lightsaber but we won’t give you a red crystal
Me with a red crystal in my saber: what did you say?
Me the dumb ass in the back
With the sleeve at the emitter and the emitter at the sleeve ,is this how you do it
Actually a red Kyber Crystal is made by making a Crystal “bleed” against it’s will, making it red. And a Jedi master, Stass Allie I think had a Red Lightsaber before the clone wars. She changed it to blue because of the Sith returning.
JFK it is also very rare but they can come naturally (in the new Vader comics we learn that he changed his kyber crystal from a bleeder one to a naturally formed one)
That looks pretty imposing when you swing that staff back in a rudder guard (ish, it's a lightsabre) stance!
You might be able to carry it around a arrow quiver or pool cue case
A Scottish Highland scabbard would be an idea IF you can get it altered to fit the Savi's hilts.
If anyone has connections to a leather worker, they might try to alter a mare's leg. The sabrestaff doesn't look to be much longer than the rifle a mare's leg is made to carry.
Can you put a pummel piece on the emitter side? I love using long-hilted blades
The pommel isn't open ended so you wouldn't be able to have a blade equipped.
Devon Scouten right, but you can still put it on tho?
@@__DYLAN_ROBIN__ potentially, not sure if the threads would match though to be able to secure it, and a blade wouldn't be possible because the pommel is mostly solid on the end aside from the holes for the sound to come out of
Devon Scouten I’m not sure you get what I’m going for; I want a long hilt with one blade.
Devon Scouten my fault bro, I probably didn’t describe it well
Thank you for sharing. The Protection and Defense is my favorite option.
You twirling the double lightsabers at the end was awesome.
Could you imagine a connector pommel that allowed quad blades. That would be slick.
I bet Sir James has four Savi Workshop lightsabers. Call the metal shop and ask them to build you one.
It was a pain swinging those heavy sabers lol I was worried about it dropping
I think there was an etsy bay back then, it was a staff holder that had the staff hit aligned to your belt, I dont know if it will fit with Disney sabers as it was made for Ultra sabers. it used 'their' connection as an anchor point and then used to cups to hold the ends in place. think hook and loop but on a big scale.
It kinda looks like the girls lightsaber from old republic who beat darth malgus by forcing him into that mountain
Edit: darth malgus lives
Opposite of Mismatch Satele Shan’s saber is my favorite dual blade.
I live in au and have not nearly enough money to buy anything cos of the fires but I still watch this as a loose dream
Honestly I've never really liked the double sided blades like at all idk why, I like them just holding two much much better
Different people have different preferences, I do agree with you though. I honestly prefer having only one lightsaber.
@@mr_multiversal_03 same, though if I did use two I'd use one fronthand and one backhand.
I’m getting a saber like mauls it can be double sided or a single saber but I’m going to have mine able to split apart so I can have two sabers like Asoka Tano
@@ambblackbee1541 Then just buy Ahdoka's lol.
Ahsoka*
I really want to go to star wars Galaxy's edge I've never been but it looks really fun and exiting
same man but i’m broke
*S A M E*
I am next year
I really like what you did to create the saber staff. Nice work!
You became a Temple Guard!💂🏻♂️
One cool idea for a 3d printing for the pummel would be to make a "broken" piece and can add 2 or 3 small cords poking out and it could look like Cal's original lightsaber that got damaged.
As in to look like there was more but the original pommel was cut off? That would look pretty cool
Looks very impressive indeed. In the process of building my own Saberstaff, but mine will be from Saberdyne Industries. Do you have a favourite colour for the staff?
This is a cool accessory but I’m also wondering if there is a lightsaber connecter thats like the Jedi temple guard saber connector
XKorangarX There is
I really hope they find a way to make the Kylo Ren crossguard blades functional and compatible with the Savi sabers, either that or they could make separate similar pieces that can somehow be illuminated by the main blade itself, because that would be extremely great and add even more customization. It doesn't have to always be jutting straight put either, there could be options made to have them point horizontally up or down, and even have pieces that only let you use one like a forked lightsaber. But of course that's just *one* example. There are still many other possibke optipns regarding just the pieces alond like making it curved, foldable double bladed lightsaber, longer pieces to connect more and form a lightsaber pike, or even to have two blades close together from one side and emitter. Imagine how much more ideas people can come up with simply from making custom overlay parts! Sure some of it will be expensive, especially if they somehow shine the light directly into more blades from one emitter, but it's totally possible and worth it, especially since Disney for whatever reason isn't selling their separate scrap metal anymore, which is rather unfortunate. But hey, I'm sure other people can come up with more and better designs anyways. Maybe they can replicate the official ones as well or even make them look better with more paint and material options, especially if you want to make a hilt lighter. Maybe even if you want to replicate the design a Legacy lightsaber without having to pay for yet another separate piece or pieces. Just get two lightsaber cores and two main blades, and you're good to go.
Hey! I'm also building a staff. I saw the connector on eBay, and I'm building one from elemental nature! Get it bro!
finally, i may recreate my fallen order saber
@dragon bro yo mama
Valor and wisdom mostly, with a bit of peace and justice and a duty and resolve emitter on the back end
God I love star wars
Hold on, does this mean I can make my lightsaber from fallen order, officially?
What I really want is where you can take it apart and turn it into 2 light sabers
The Kanan one or the Fallen order one?
@@plague6566 fallen order one
Maybe with a snap-on point and magnets?
Very cool!! But I think Disney should release official double bladed sabers for like 300 dollars and have each half smaller than the standard.I would make a double bladed,crossgaurd purple lightsaber, with the gold protection and defence pieces!
+love your vids
Willbuy
“Cease hostility” - Temple Guard
@Sir James Saw you Saturday in front of City Hall watching the parade and called out your name. My wife and I were on our way out to change into our tunics and get our sabers. Later we saw you and your friend who was wielding your double. My wife and I had a blast hiding from Kylo Ren and the Stormtroopers while interacting with the people of Batuu.
I thought I heard my name
So, I recently bought myself a Savi's workshop lightsaber, and I love the thing....
HOWEVER, I am a huge nerd for polearms so the idea of a lightsaber pike has been something I NEEDED....
So what I'm wondering, is if I could theoretically get one of these couplers, and epoxy a PVC pipe onto the pommel connector and make myself a lightsaber pike attachment?
Or is there better options to get what I want?
DUDE, DUUUUUUUUUUUUUUUUUUUUUUUUUUUUUDDDDDDDEEEEEEEEEEEEEEEE.
*YOU'RE A LIFESAVER, EVERY TIME I WANT INFORMATION ABOUT SAVI'S WORKSHOP LIGHTSABERS, THERE'S ALWAYS YOU!* ;D
Looks great. Maybe a bit of good automotive paint on the connector, or if you have Power and Control (like I do) you can probably make some rubber grips and glue those into place.
Hey James, could I ask where you got that Temple Guard mask in the background?
Got it on etsy
I've wanted a blue saberstaff for a long time now, so I'm really glad I can finally do that!
Right now I'm planning on making two Elemental Nature sabers with blue blades and then putting them together at Disney. As long as I can get like the +$400 I need to actually do this, then it's a definite that I'm going to do it
More like 500 because the sabers are 200 but you pay more for like I don’t know the experience
Goin to Florida next year and buzzing to build a saber, just hope it’s not a hassle in the airport
To be honest with you James I would have to modify a leather sword carrier to hold this on my back if you really want a practical way of carrying the saber staff. Or make a chest or waist rig for it.
Well done Sir James!! Keep the videos coming...enjoy everything you do!
To get them to align is a simple manufacture fix. Make TWO pommels instead of one that connects two sabers. The pommels will be threaded to align with each other straight. If you see the threads on Phoenician grinders (for weed) they lock and align perfect because of how they’re machined. Now for the two pommels on the end of each saber to stay connected and not unthread when clashing, add swing clamps on the outside. It also makes it easier to flick the clamp off, do a 180 twist, and now you can separate them effortlessly like in fallen order.
How are you able to swing the staff around so freely like that?
Will be possible for savi' workshop light saber to have 2 colour to like a black and red or different colour combo
Can you use it for the legacy temple guard lightsaber
please make a short video on the process of putting the plumbers tape on specific parts of the hilt for those that are interested in doing that but don’t really know how
02:55 At least here where I live and work (Disney California) the reasons are quite simple. The state is requiring all boats that dock at Long Beach an expensive docking fee. Most manufactures of these parts are over seas and don't feel they should have to pay that much. Thus a back up of merchandise to the parks is floating out there in the seas hoping either party gives in first.
In the light of all of this Disney has taken it on themselves to make sure that people shelling out $200 for the experience get the parts they need first than taking a chance that they may or may not sell the parts separately.
You've got to understand, some of us haven't been to Galaxy's Edge and would rather be able to build our own light saber than buy the parts separately and to my knowledge they don't sell the cores on their own. So that leave tourist and people who can only enjoy Disneyland maybe once a year the experience only.
It's a shame this saber doesn't come with the connection piece as standard like the Darth maul one does
The nearest time I can visit Galaxy's edge is in 4 years. I hope that they will still be open.
Even if you do attach the saberstaff to your belt, you can utilize the Power and Control emitter that has the d ring if you want to. That’d be cool if not too much weight.
Hi Sir James, could you please tell me how many blades ( not hilts) can you put in the lightsaber bag that comes with the Savi's lightsaber? Thank-you
I wasn't really sure about this one.. until you turned it on! I LIKE this ALLOT! The combination of blue and green is bad ass! I wasn't sure because it looks bulky. That, I can live with after seeing in action. I assume that these are the 28" blades you told me about yesterday? How long is it now, with the blades in? Very cool, indeed! After talking yesterday, I figured it wouldn't be long for the next video..but, Wow! That was fast! Your responses are fast too. Thanks for another great video there, Sir! 👍
That's really awesome holy cow! I was going to pick EN for my next build whenever I'm able to go again but now I may pick P&D. Really cool. (Nice song choice too)
Oh also I had a similar issue with my hilt like yours. I just changed the batteries and it was fine after that. But I'm sure you already knew that.
will it be fine without plumbers tape if you don't mind the pieces not alligning perfectlly?
I'm debating between doing the build your own or buying the legacy made windu saber
Was curious on where you got the white helmet at that's on the left side of the video
Etsy
My wallet when I go to galaxy's edge:(explodes)
I feel like if I go to Galaxy’s edge 400 dollars will do me fine for about 5 seconds...
The emitter I have (Power and Control) has a steel piece on it for the belt connector. Now I only need some good pants to keep it up....and a belt!
“I gotta get one of those” (even though i dont have savi sabers)
Dang them saber skills are nice though jeez man also I like the green and blue thing as well of course yellow lightsaber
I love the yellow light sabers, but I wish they looked less like the green ones.
me: i want one
mom: 200$ boi no
Imagine being cool enough to have this object. Love you dude! Also say hi to your puppy for me!
Thank you for your service guarding the temple.
Are you allowed to mix and match parts from different boards to put on one light saber at the work shop
Where did you get that jedi temple guard mask in the background???
Elon musk’s kid: uses 4 arms to duel wield double bladed lightsabers like Pong Krell
Are there Short blades like the Temple Guards had in Clone Wars?
Yea
Cool I would love to have one but wouldn’t it cost as much as two savi’s workshop lightsabers
is there a custom part where the pommel has a crystal at the end of it? I'm curious.
Bro I'm on my new phone thank god your a star wars youtuber I love your content
got to ask again
where can i find that aluminum coupler. i need to order 2 one for me and one for another
Hey man I ordered mine on the 29th of December and I understand that new year's is a factor but it still says processing. How long did it take for yours to deliver? And how long do you think for me?
I ordered mine on the 19th and havent got it
Got it
Is plumbers tape removable? Also is it possible/ how difficult is it to connect the pummel connector without it.
yep it's easy it's just the plumbers tape helps with alignment
SirJames I Gamerfuzion okay.
I can now build my Fallen Order Lightsaber.
Don’t know if you will see this but do you think you could connect and obi wan legacy saber and a Savi’s one?
How long did it take for the machine aluminum connector to be made/ delivered?
holy smokes! this is amazing sir james! thank you for sharing !!!
Did you go to Star Wars galaxies edge with that and walk around with it ignited?
Can’t you use the darth maul connector to connect these? Or am I dumb or it doesn’t work?
Are pummel pieces compatible with the emitter end of the saber. If yes I will put the rancor tooth on one end of the saber staff and the blade on the other giving me a saber pike
Hey is it possible to make a lightsaber with a kyloren finger gard style lightsaber at galaxys edge with a purple crystal thing the rest custom
There are now some new double pommel designs up on the RENEVforge website!
Gonna have to check those out
i didnt know u could do that with the custom savis ones I thought u could only do it with maul and temple guard
Also you can buy legacy lightsabers and kyber crystals on amazon
No