6:20: Yea, that would probably be my personal pick too. Break up all the chrome with as much black and gold as possible. Might or might not swap the upper and lower sleeves. 6:58: Eh, I still prefer the first emitter. It's good though. 9:24: Probably my least favorite design. It's still not BAD, just the least interesting IMO. The three buttons lined up with the switch prevents it from being BAD. 10:21: It's alright. Maybe it would look better with a different upper sleeve. 10:43: Same as above, changing emitters wasn't enough to improve this design combo, but neither did it ruin it. 12:06: Not quite feeling it. I think it may be due to my strong preference for the black pommel and other activation plate. 14:24: Wouldn't be my first choice, but looks alright. While I don't prefer the round emitter, I think it woks well with that sleeve in the upper position here. 14:46: Maybe a mild improvement over the previous one. 15:39: It's alright. It would look better if you could get the black 'button' on the lower sleeve aligned with the switch and 'button' on the emitter. 15:57: Maybe a slight improvement. The round emitter goes well with the gold band of the upper sleeve. Overall, I think Peace and Justice is my third favorite after 1) Protection and Defense and 2) Elemental Nature.
Thank you for giving me time stamps as much as I enjoyed this man's video it sometimes good to get straight to the point so I can get a rough idea on what they look like without forgetting what the other look like so thank you kind sir
This review is truly one of his best piece of art. Really great video with all the pieces. This was awesome!! Thank you Sir James for the shout out. Keep up the great work!
I found this video in August of 2021 when I was doing research for my October 2021 trip. It was a big help in helping me figure out what I wanted. The only part that didn't work was they wouldn't let me mix the switch casing halves. I ended up with the combination shown at 10:20 and I'm super happy with it. Thanks so much!! 😊
I'm going to be so torn between Elemental Nature and Peace and Justice when I go. Elemental Nature's silver engravings are my favourite lightsaber aesthetic. But Peace and Justice is so nostalgic that I almost get emotional looking at it. That first set he built might've sold me though.
I’m Getting (For Lightsabers So No Holocrons Or Stands Or Anything) A Peace And Justice With Green Kyber Crystal A Legacy Obi-Wan Kenobi Lightsaber A Yellow Kyber Crystal From Dok Ondars
This is the set I’ll be choosing in just a couple days! You’ve provided so much info to us, it really means a lot. Haven’t been to a Disney park in 10 years and Savi’s is the highlight of my trip, so yeah, no pressure lol. Thank you for narrowing down my choices and telling me everything I need to know, cheers!
Went Yesterday to Savi, Built a Peace and Justice. I actually ran into you and said hello. Thanks for helping me with my decision on my build ! And thanks for you’re personal card !
I would like for mine to look similar to Luke/Kenobi’s saber. The lower sleeve being the sleeve with the round gold thing, the switch being the one with a “wall” around the switch, the upper sleeve, being the the sleeve with the lines (I don’t know what they’re called ;-;) and with the “swirly button”, and finally for the emitter, I would choose the round emitter. THAT is my dream lightsaber :)
Thanks for taking the time to review this build and demonstrate all the combinations! These videos were a big help in planning the design of our sabers. Knowing which pieces we were going to use allowed us to enjoy more of the show and atmosphere.
Jedi Master James, I'm going to Galaxy's Edge in Florida during February break. I would like to build a lightsaber and make reservations in advance. for Savi's. I'm not sure what time I will reserve it for, but if the lightsaber building is earlier in the day, I don't wanna carry that thing around all day while riding rides and experiencing Galaxy's Edge at its finest. Could you give some advice on what to do with the lightsaber? I've heard about the merchandise drop off/pick up at First Order Cargo, but I'm a bit confused about how it works and where I pick the merchandise up. Your feedback would be really helpful! MTFBWY!!!
Dude, thank you so much for this video. Im a classic guy with a classic taste. Im going to visit savis workshop at desney world in Orlando this December and im going to be picking up the Peace and Justice themed lightsaber. I had a lot of confusing on which parts I would like for my lightsaber and with this video that you made now Im clear of what I want. Again, thank you so much and greetings from here in Puerto Rico. Keep up the good work👍🏼
6:58 I would switch the gold button sleeve next to the emitter and the rubber lines sleeve next to the end. Edit: I would do this to make it look like mace windu, anikin and darth Vader’s lightsaber.
Read my mind. As soon as I first saw that rubber grip sleeve that looked like Mace's design, I wanted to try and replicate it as closely as possible. I still think my personal favorite design is one of the Power and Control's, but this one is a very close second.
Can you da a top two pieces Peace and justice: Disc emitter Metal rings sleeve Bottom pieces Bantha hide Rancor tooth This is the build I would try to collect. Just wanna see what it looks like. Cheers.
Built my peace and justice lightsaber at Savi's on October 24, 2019. Anyone wanting one of these should know that the quality of all components is really excellent. The finished lightsaber is quite hefty! The blade is easily dismounted and replaced. Function is long term reliable, and batteries last a long time. The only problem I had was that I had to have all of the pieces I didn't choose at Savi's. I eventually found them on eBay. This got really expensive, especially as I also had to have a second chassis, blade, stand and crystals. These are habit forming!
I would also pick the peace and justice lightsaber but I would use a green Kyber crystal inspired by Ezra Bridger’s 2nd lightsaber from Star Wars rebels seasons 3 and 4 (unless if galaxy edge will bring Ezra Bridger’s 1st and 2nd lightsabers as legacy lightsabers at doc ondars at some point in the future)
Thanks for the video on Peace and Justice - The combos are awesome - I will be building this set come the summer with some of the crystal choice you have here.
The design at 14:25 is the one that I have, except the only difference is that I have the cone-shaped piece from the new Peace and Justice set as the pommel for mine, and I have the other all-chrome pommel from the original set too.
Really wish you had reversed the sleeves on that last combo you used when igniting the blades. I was hoping to see it, and was really annoyed when I saw you do it backwards, lol. I think I would go both with this one, as well as the power and control. Both are really nice.
i love getting high and watching random youtube videos. i also have a bit of a fetish for starwars. i've carried the fantasy of being a Jedi all my life. this video gets a thumbs up from me. it's cool, calming, and i feel like the dude really has a good process for reviewing this thing and it's just nice to watch.
#1 Is the cool in my opinion, but you might want to switch the sleeves because the black one is not comfortable to hold on to for long time, and I would prefer the activation button with the protection on it along with the gold piece. But I might get the 15:38 one instead.
I was just at Savi's Workshop in Orlando, they sell you lightsaber pieces separately from any set and you're not limited as to how many pieces you can buy.
10:43 I'd go with that variant, but I'd change the end cap. I would make it be like a fusion between the lightsabers of Anakin and Luke, as a way to pay tribute to them. As for the Kyber Crystal, either Blue or Green would be fine with me.
At 19;28 it looks like the yellow crystal is emanating a green light. I have a RGB saber I got off Amazon that does that, it's the the RGB admixture for the yellow light has a very high level of green.
Mine will be green blade with the long rubber grips for the bottom sleeve, the black with gold button for upper sleeve, the flanged emitter, black Pummill, and gold activation switch.
Peace and Justice that last configuration at the end is the one I am going with and thank you for the switch option I hadn’t thought about the accidental switching on especially in the heat of battle!! Lol, thanks for that tip!!! Now I know for sure what combo i want to put together!
I'll go for 6:14 but im gonna try to swap the sleves upside down, but im also afraid that the gold part won't match just like at the videos. Do they always lined up?
While I would normally go Power and Control with a Red Kyber Crystal, just to indulge my inner Sith, I have to go Elemental just for that Rancor tooth end cap. If I could buy that separately and just add it to my P&C build, then I would be down for it.
Sir James! Dude I love your videos on Galaxy's Edge! I'm still unsure on which lightsaber to build but I will mediate on it some more. Oh! And those cards? Badass! 😮
I would definitely go with peace and justice, I would pick the two sleeves with the groves I would pick the activation plate that looks like a switch from a starship and I would back the back activation plate that has the gold knob on it and I would go with the pommel that has more black on it and I would go with wider emitter and I would choose a green Kyber crystal
Thanks I think I know what pieces I'm going to use when I go this year or next year I don't know yet because of costs of flying and stuff(I will pick purple and buy white).
I really want to craft this saber but I want the leather strap from elemental nature as the bottom sleeve. What’s the policy on scrap metal right now and will it fit?
SirJames I Gamerfuzion thanks for the info. My girlfriend will be crafting elemental nature at the same time I craft Peace & Justice. Do you know if Disney will allow me to use her unused parts during the experience and vice versa?
I’ll do peace and justice with blue so this is very helpful! Thank you! Hopefully when I start going I would love to meet you! May the force be with you Sir James!
i was really hoping to see his final build but with the sleeves swapped, i like the grip looking part on the bottom and the solid black on top. then just keep the yellow pearl part of the switch plate but swap out the non-enclosed switch with the enclosed switch. If anyone has a picture of build put together. send it my way please! i wanna see how it looks before i build mine in April :D
Id pick the exact pieces you chose at the end of the video> the only thing I would change is to put the large grip at the bottom. In other words, Just flip the two sleeve pieces.
Love the content my friend. If you use sharpie to number your parts(on the inside) it'll be easier to keep track of what combos you use. Especially if you work them out before you go on camera.
I’m going in a week and 2 days and I’m having a hard to deciding between peace and justice and protection and control both look great but I really like the old republic
I like the emitters in this set - one reminds me of Kanan Jarrus's weapon, while the other recalls Anakin / Rey's, although the Savi version has that small cleft added at the apex of the curve. Not sure which I'd go for.
Does anyone have any advice on getting the black pommel off? I've nearly broken my fingers trying to remove it, and the stupid thing doesn't budge. I was able to get it off ONCE, and I have no idea how I did it.
I'm going to Galaxy's Edge soon and I definitely want to build a Peace and Justice lightsaber. Can you choose which activation panels you use when building one?
Thank you for this video i wanted to know what my choices looked like put together and it looked perfect and u should my exact build and it looked perfect thank you
Sir James… Shouted you out for these videos on my podcast "Long Live the Fighters!" I want to build a saber, but I'm in the Midwest and not going to be near Galaxy's Edge for awhile. I trust you to do it-need your help! Peace & Justice w/ a red Kyber… because, "Good, bad, or a bit of both? Bit of both!" haha! Thanks, man!
Hey can’t wait for your elemental Nature review Edit: Personally I don’t think mixing different sets will look good. Because Power and Control is more of a flat gray. Which is understandable but saddening
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Anyone else watching all the different lightsaber categories to get an idea of what kind they want to build?
I know right like its between elemental nature and protection
Me lol
Yea I’m going in a few months and think I want this set
I already know how I’m building my lightsaber
I really like peace and justice and I’m probably going to put a green crystal
It kills me seeing his saber combos, I’m always like “oh yeah, that sleeve with that activation switch, HE CHOSE THE WRONG POMMEL, NOOOOOOOOOO!!!!”
same
same
Oh god, so true; really wish he could have used every piece he WOULDN'T have used, meaning every piece without prominent or very visible gold.
Same
Same tho
I gotta stop watching savis work shop reviews. Every time i go “on no wait now this one is cooler than that other one.” But I know ill never stop
Same here
Same but for me it’s the crystals first i wanted purple but then green now blue
I’m afraid if i ever build a lightsaber I will pick something and then regret it lmfao
Same
@@korren4609 same
6:20: Yea, that would probably be my personal pick too. Break up all the chrome with as much black and gold as possible. Might or might not swap the upper and lower sleeves.
6:58: Eh, I still prefer the first emitter. It's good though.
9:24: Probably my least favorite design. It's still not BAD, just the least interesting IMO. The three buttons lined up with the switch prevents it from being BAD.
10:21: It's alright. Maybe it would look better with a different upper sleeve.
10:43: Same as above, changing emitters wasn't enough to improve this design combo, but neither did it ruin it.
12:06: Not quite feeling it. I think it may be due to my strong preference for the black pommel and other activation plate.
14:24: Wouldn't be my first choice, but looks alright. While I don't prefer the round emitter, I think it woks well with that sleeve in the upper position here.
14:46: Maybe a mild improvement over the previous one.
15:39: It's alright. It would look better if you could get the black 'button' on the lower sleeve aligned with the switch and 'button' on the emitter.
15:57: Maybe a slight improvement. The round emitter goes well with the gold band of the upper sleeve.
Overall, I think Peace and Justice is my third favorite after 1) Protection and Defense and 2) Elemental Nature.
Andrew Parsons I just wanted to thank you for this list. I definitely have an idea for the lightsaber I’ll build when I go to Galaxy’s Edge.
Id use the first one. With the other endcap and swapped the sleeves. At least until I get the Vader/Anakin grip piece from Power and Control
Thanks for writing all the time stamps. It probably took very long so tysm
Thank you for giving me time stamps as much as I enjoyed this man's video it sometimes good to get straight to the point so I can get a rough idea on what they look like without forgetting what the other look like so thank you kind sir
Peace, justice 'and security to my new...'sorry I got a bit caried away
What?
... Empire.”
“Your new empire?”
AverageJoe “don’t make me kill you”
Hampton Cobb “Hampton my allegiance is to the republic to democracy!
Smove “if you are not with me, then you are my enemy”
#1 is basically what I want, just flip the sleeves
I would pick peace and justice lightsaber with green kyber crystal
Me too.
Yep same here
joshua campbell that's what I got. Now I want a blue crystal bad
@@sirownzalotgaming3025 it will be while I go to Galaxy edage
When you go you gotta make it count then. Get all the kyber crystals u can!
This review is truly one of his best piece of art. Really great video with all the pieces. This was awesome!! Thank you Sir James for the shout out. Keep up the great work!
8:56 "you will try"
Lol anikan
You be comedy gold
I found this video in August of 2021 when I was doing research for my October 2021 trip. It was a big help in helping me figure out what I wanted. The only part that didn't work was they wouldn't let me mix the switch casing halves. I ended up with the combination shown at 10:20 and I'm super happy with it. Thanks so much!! 😊
I'm going to be so torn between Elemental Nature and Peace and Justice when I go. Elemental Nature's silver engravings are my favourite lightsaber aesthetic. But Peace and Justice is so nostalgic that I almost get emotional looking at it.
That first set he built might've sold me though.
13:04 every single time I try to put in a USB
I’m Getting (For Lightsabers So No Holocrons Or Stands Or Anything)
A Peace And Justice With Green Kyber Crystal
A Legacy Obi-Wan Kenobi Lightsaber
A Yellow Kyber Crystal From Dok Ondars
RIP your wallet, wish I could afford all that
This is the set I’ll be choosing in just a couple days! You’ve provided so much info to us, it really means a lot. Haven’t been to a Disney park in 10 years and Savi’s is the highlight of my trip, so yeah, no pressure lol. Thank you for narrowing down my choices and telling me everything I need to know, cheers!
Went Yesterday to Savi, Built a Peace and Justice. I actually ran into you and said hello. Thanks for helping me with my decision on my build ! And thanks for you’re personal card !
I would like for mine to look similar to Luke/Kenobi’s saber. The lower sleeve being the sleeve with the round gold thing, the switch being the one with a “wall” around the switch, the upper sleeve, being the the sleeve with the lines (I don’t know what they’re called ;-;) and with the “swirly button”, and finally for the emitter, I would choose the round emitter. THAT is my dream lightsaber :)
10:41 Now that’s a cool looking lightsaber so if I ever go to Galaxy’s Edge and get the Peace & Justice option, that is what I would get.
Just built this exact set up this past weekend. love it!
I built pretty much the same one, just with the other activation switch. Have it beside me right now! Super cool design, and I’m happy I built it.
Thanks for taking the time to review this build and demonstrate all the combinations! These videos were a big help in planning the design of our sabers. Knowing which pieces we were going to use allowed us to enjoy more of the show and atmosphere.
Jedi Master James, I'm going to Galaxy's Edge in Florida during February break. I would like to build a lightsaber and make reservations in advance. for Savi's. I'm not sure what time I will reserve it for, but if the lightsaber building is earlier in the day, I don't wanna carry that thing around all day while riding rides and experiencing Galaxy's Edge at its finest. Could you give some advice on what to do with the lightsaber? I've heard about the merchandise drop off/pick up at First Order Cargo, but I'm a bit confused about how it works and where I pick the merchandise up. Your feedback would be really helpful! MTFBWY!!!
Dude, thank you so much for this video. Im a classic guy with a classic taste. Im going to visit savis workshop at desney world in Orlando this December and im going to be picking up the Peace and Justice themed lightsaber. I had a lot of confusing on which parts I would like for my lightsaber and with this video that you made now Im clear of what I want. Again, thank you so much and greetings from here in Puerto Rico.
Keep up the good work👍🏼
Glad I was able to help
Can you make a video of the plumbers tape to align the pieces
6:58 I would switch the gold button sleeve next to the emitter and the rubber lines sleeve next to the end. Edit: I would do this to make it look like mace windu, anikin and darth Vader’s lightsaber.
Benjamin Fisher Guitars I hope you will enjoy it!
Read my mind. As soon as I first saw that rubber grip sleeve that looked like Mace's design, I wanted to try and replicate it as closely as possible. I still think my personal favorite design is one of the Power and Control's, but this one is a very close second.
7:00 I really dig that saber, might build it....
I like it too
Can you da a top two pieces
Peace and justice:
Disc emitter
Metal rings sleeve
Bottom pieces
Bantha hide
Rancor tooth
This is the build I would try to collect. Just wanna see what it looks like. Cheers.
Built my peace and justice lightsaber at Savi's on October 24, 2019. Anyone wanting one of these should know that the quality of all components is really excellent. The finished lightsaber is quite hefty! The blade is easily dismounted and replaced. Function is long term reliable, and batteries last a long time. The only problem I had was that I had to have all of the pieces I didn't choose at Savi's. I eventually found them on eBay. This got really expensive, especially as I also had to have a second chassis, blade, stand and crystals. These are habit forming!
I would also pick the peace and justice lightsaber but I would use a green Kyber crystal inspired by Ezra Bridger’s 2nd lightsaber from Star Wars rebels seasons 3 and 4 (unless if galaxy edge will bring Ezra Bridger’s 1st and 2nd lightsabers as legacy lightsabers at doc ondars at some point in the future)
Thanks for the video on Peace and Justice - The combos are awesome - I will be building this set come the summer with some of the crystal choice you have here.
The design at 14:25 is the one that I have, except the only difference is that I have the cone-shaped piece from the new Peace and Justice set as the pommel for mine, and I have the other all-chrome pommel from the original set too.
Awesome video. 14:46 with green kyber crystal is my build and loving it.
nice
Really wish you had reversed the sleeves on that last combo you used when igniting the blades. I was hoping to see it, and was really annoyed when I saw you do it backwards, lol. I think I would go both with this one, as well as the power and control. Both are really nice.
i love getting high and watching random youtube videos. i also have a bit of a fetish for starwars. i've carried the fantasy of being a Jedi all my life. this video gets a thumbs up from me. it's cool, calming, and i feel like the dude really has a good process for reviewing this thing and it's just nice to watch.
Yeah I really love Star Wars so I think as myself as a Jedi youngling who hasn’t constructed his saber yet
#1 Is the cool in my opinion, but you might want to switch the sleeves because the black one is not comfortable to hold on to for long time, and I would prefer the activation button with the protection on it along with the gold piece. But I might get the 15:38 one instead.
I was just at Savi's Workshop in Orlando, they sell you lightsaber pieces separately from any set and you're not limited as to how many pieces you can buy.
10:43 I'd go with that variant, but I'd change the end cap. I would make it be like a fusion between the lightsabers of Anakin and Luke, as a way to pay tribute to them. As for the Kyber Crystal, either Blue or Green would be fine with me.
At 19;28 it looks like the yellow crystal is emanating a green light. I have a RGB saber I got off Amazon that does that, it's the the RGB admixture for the yellow light has a very high level of green.
Mine will be green blade with the long rubber grips for the bottom sleeve, the black with gold button for upper sleeve, the flanged emitter, black Pummill, and gold activation switch.
14:23 i made that light saber it's crazy seeing someone else actually making it too
I made that exact same saber combo :)
Lol same (in my head at least)
14:23 would be my saber
But with a different switch piece and bottom cap
10:42 that is my lightsaber build, blue crystal. Great videos, keep it up, may the force be with you.
Can you go twice to build your lightsaber at the same time. because I want to get power and control and peace and justice Style
10:47 mine but with the other pomelcap
Peace and Justice that last configuration at the end is the one I am going with and thank you for the switch option I hadn’t thought about the accidental switching on especially in the heat of battle!! Lol, thanks for that tip!!! Now I know for sure what combo i want to put together!
The first one with the second emitter is exactly what I built on Sunday... with a purple blade! Awesome video!
They should add a place at Galaxys Edge called “Smugglers Mission” that allows you to create your own blaster.
would be neat but blasters are 100% a big no no at Disney
I want the two black sleeves from this set (but I'd make the gold accents black too) with an emitter and pommel from Power and Control. Dream saber.
I am going to Galaxy's edge in Florida this summer and it is hard to choose what kind of lightsaber to build
I’m planning on Protection and Defense with a green crystal
I'll go for 6:14 but im gonna try to swap the sleves upside down, but im also afraid that the gold part won't match just like at the videos. Do they always lined up?
Yeah I’m also thinking about that but it would be much better if that bottom sleeve he used had more gold
So I have a question for you. Do the sleeves have to go on a specific way? Or can you flip them and have them either way on both ends?
They go a specific way
While I would normally go Power and Control with a Red Kyber Crystal, just to indulge my inner Sith, I have to go Elemental just for that Rancor tooth end cap. If I could buy that separately and just add it to my P&C build, then I would be down for it.
14:24 is my lightsaber with a blue blade tell me if you like it or not
👍
That would be mine too with a green blade
Where can i buy a support to keep the lightsaber in which store of diney world can I ????????
Sir James! Dude I love your videos on Galaxy's Edge! I'm still unsure on which lightsaber to build but I will mediate on it some more. Oh! And those cards? Badass! 😮
Kush_ Shinobi I know how you feel I don’t wanna mess up my lightsaber and be sad forever
I'm bummed this style doesn't have the covertec clip. Does anyone know how difficult/easy it would be to install one on it?
10:43 how is it peace and justice it look a lot like Vader’s saber
anakin and vader have similar sabers
Could you may take every part you have and build different combos?
Ehren Bra I think it was like three days before when he said he would mix peace & justice and power & control.
@@janjakubzika ok,thanks
I'd def pick Peace and Justice with either Purple or Green
I would go with the design from the 10:20 point and have a blue kyber crystal and get the alternate emitter
I would definitely go with peace and justice, I would pick the two sleeves with the groves I would pick the activation plate that looks like a switch from a starship and I would back the back activation plate that has the gold knob on it and I would go with the pommel that has more black on it and I would go with wider emitter and I would choose a green Kyber crystal
Thanks I think I know what pieces I'm going to use when I go this year or next year I don't know yet because of costs of flying and stuff(I will pick purple and buy white).
I really want to craft this saber but I want the leather strap from elemental nature as the bottom sleeve. What’s the policy on scrap metal right now and will it fit?
all savi parts work with one and another Disney stopped selling additional scrap metal months ago
SirJames I Gamerfuzion thanks for the info. My girlfriend will be crafting elemental nature at the same time I craft Peace & Justice. Do you know if Disney will allow me to use her unused parts during the experience and vice versa?
@@logandumont not sure
Could you use timing rings to get the pieces to line up correctly? Also the one at 10:20 is exactly the one I plan to build with a yellow crystal.
this guy actually looks like a jedi master when he showcases the parts of the saber
i think that's my saber at 10:10. it's deffinitely that, or i swap the top sleeve with the mostly black sleeve.
The first two were my personal favorites. Beautifully well designed
I’ll do peace and justice with blue so this is very helpful! Thank you! Hopefully when I start going I would love to meet you! May the force be with you Sir James!
i was really hoping to see his final build but with the sleeves swapped, i like the grip looking part on the bottom and the solid black on top. then just keep the yellow pearl part of the switch plate but swap out the non-enclosed switch with the enclosed switch. If anyone has a picture of build put together. send it my way please! i wanna see how it looks before i build mine in April :D
10:21 thats what i would want to build except using the other end pommel.
Peace and justice with red crystal is my Oc’s lightsaber
I think I am going to get this and power and control to get one of the other pieces
Can I use the piece with gold ring around for the handle? 6:16
Id pick the exact pieces you chose at the end of the video> the only thing I would change is to put the large grip at the bottom. In other words, Just flip the two sleeve pieces.
Does the yellow kyber crystal in the blade give off a neon yellow-greenish light?
Love the content my friend. If you use sharpie to number your parts(on the inside) it'll be easier to keep track of what combos you use. Especially if you work them out before you go on camera.
Where did you get the Jedi costume from?
Can you please make a video on elemental nature saber.? Other videos are not showing each piece like you show in these reviews.
my and Dan did a collab while back + I currently don't have the complete set just yet - ruclips.net/video/ZVn8oWM6p5o/видео.html
@@SirJamesIGamerfuzion oh it's alright. Thanks for the link though.
I’m going in a week and 2 days and I’m having a hard to deciding between peace and justice and protection and control both look great but I really like the old republic
What did u get
BearBy TheBrick what did you get?
These combos would be cool in Fallen Order
Some of the pieces are and have the same names
Is there any rubber on these sleeves like there is on the one from Power & control? Asking because I am very allergic to natural rubber and latex.
I like the emitters in this set - one reminds me of Kanan Jarrus's weapon, while the other recalls Anakin / Rey's, although the Savi version has that small cleft added at the apex of the curve. Not sure which I'd go for.
Does anyone have any advice on getting the black pommel off? I've nearly broken my fingers trying to remove it, and the stupid thing doesn't budge. I was able to get it off ONCE, and I have no idea how I did it.
The one you built in 11:40 is probably what I’m gonna build if I ever get to Galaxy’s Edge.
I got a question how much does it cost the lightsabers in if you building in that place in the center Disneyland California
When you were showing off sleeves. Is the black stuff rubber? Or just metal?
has a rubber feel
10:45
Except for the pommel, that’s what mine looks like.
On the sleeve with the gold ring and the black lines, are the black lines rubberized, similar to the one in power and control?
it's so hard to decide which combination is the best. i wish i could just keep the whole set.
Are the black stripes rubber on the one with the gold ring around it?
I’d definitely get power and control I just don’t want a red lightsaber and I feel like it matches mostly with that build
This is the lightsaber set I want if I ever get to go to Galaxy’s Edge! I want the green crystal!
Another great video Sir James! The Peace and Justice with a green Kyber Crystal is what I plan on building. Thank you for sharing :)
If you switch the top sleeve of his original to the bottom, it looks a lot like Anakin’s lightsaber.
If I did elemental nature would I get every piece of scrap metal from that category to keep forever?
I'm going to Galaxy's Edge soon and I definitely want to build a Peace and Justice lightsaber. Can you choose which activation panels you use when building one?
Yes from your set
Thank you for this video i wanted to know what my choices looked like put together and it looked perfect and u should my exact build and it looked perfect thank you
Sir James… Shouted you out for these videos on my podcast "Long Live the Fighters!" I want to build a saber, but I'm in the Midwest and not going to be near Galaxy's Edge for awhile. I trust you to do it-need your help! Peace & Justice w/ a red Kyber… because, "Good, bad, or a bit of both? Bit of both!" haha! Thanks, man!
I was at Savi’s on Monday and built a protection and defense lightsaber with a purple crystal. As soon as I got outside, I switched it to white. 😆
I wish you did an anakin style,it's very similar
Hey can’t wait for your elemental Nature review
Edit: Personally I don’t think mixing different sets will look good. Because Power and Control is more of a flat gray. Which is understandable but saddening
me and The Dan-O Channel covered that in a collab on his channel found here: ruclips.net/video/ZVn8oWM6p5o/видео.html
I don’t think you will respond but is the piece with the gold band have rubber like the power and control?