Acer Nitro 50 PC Lets Fix the Over Heating Problem! CPU and Fan Upgrades | How To
HTML-код
- Опубликовано: 21 авг 2024
- 💕💕💕💕 Heatsink | CPU Cooler 💕💕💕💕
Black Version we used in the Video
Noctua NH-U9S chromax.Black
Amazon: amzn.to/3v1ggqB
One Used in Video
Noctua NH-U9S, Premium CPU Cooler
Amazon: amzn.to/3v1pjrQ
(Other Versions that will Work Below
All CPU cooler Need the M3 Screw Kit.)
Noctua NH-D9L, Premium CPU Cooler with NF-A9 92mm Fan
Amazon: amzn.to/3GVHhOJ
Noctua NH-L9x65 (Small Cooler)
Amazon: amzn.to/3kfHNih
Noctua NH-C14S 140M Fan (Large Cooler)
Amazon: amzn.to/39e5eCi
Noctua NH-L12 120MM Fan (Mid Sized Cooler)
Amazon: amzn.to/3zg9dsx
💕💕💕💕 Fans For the Upgrade 💕💕💕💕
Noctua NF-A9x14 PWM
Amazon: amzn.to/3I1Fmt6
ID-COOLING NO-9215-XT ARGB Case Fan 15mm
Amazon: amzn.to/36iVbO5
💕💕💕💕 Fan PWM Splitter Cable 💕💕💕💕
PWM Fan Splitter
Amazon: amzn.to/3aOHt85
Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable
Amazon: amzn.to/3JHRvnF
Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable
Amazon: amzn.to/35b5hjp
Fan Splitter, 3 Pack 4 Pin / 3 Pin PWM Fan Splitter Cable 2 Way
Amazon: amzn.to/3sSEwbH
💕💕💕💕Better Thermal Paste, The Noctuas Come with Ok Paste.💕💕💕💕
Cooler Master High Performance Thermal Paste
Amazon: amzn.to/3CljyFGAs
Cooler Master MasterGel Pro V2 High Performance Thermal Compound
Amazon: amzn.to/3kkcYJt
🎶🎶🎶 Screws 🎶🎶🎶
DYWISHKEY 700 Pieces M3
Amazon: amzn.to/3zuWoyr
iexcell 1725 Pcs Metric M3
Amazon: amzn.to/3Hc0ZHN
VIGRUE 570PCS Stainless Steel M3
Amazon: amzn.to/3NIzwj6
VIGRUE 570PCS Stainless Steel M3
Amazon: amzn.to/34Sk6Yy
(You will Need this to Install the Noctua Cooler Screw Kit)
DYWISHKEY 360 Pieces M3
Amazon: amzn.to/3ojLUue
500 Pieces Stainless Steel M3 Bolts Nut Washers Kit Hex Socket
Amazon: amzn.to/3GVgJgs
🦆🦆🦆🦆Wide Duck Tape🦆🦆🦆🦆
Gorilla Tough & Wide Duct Tape, 2.88
Amazon: amzn.to/3BA36SD
DISCLAIMER: This Video Description & Video contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission. FYI The Links below or Above are to Amazon affiliate account and are Paid links. As an Amazon Associate I earn from qualifying purchases.
Honestly, this man deserves recognition for his underrated videos about upgrading gaming pcs and etc. Goos job, keep it up!
I appreciate that! Thanks!!!
More specifically, The Cheap Pre Builts that most of us beginners and young people can afford. All the other RUclipsrs only make videos on these $1,000 Cases are super crazy custom builds with drilling and soldering.
@@TNW1337 Would there be anything wrong with removing the drive cage, then mounting the fan on the inside? I'm very new to PC upgrading and this is the desktop PC I have.
!!!BE CAREFUL DOING THIS WITH N50-640 I5 12400f GTX 1650!!!
I bought the noctua NHU9S.
My motherboard is different, it has only 2 ram slots and there are things between the screw holes that stand over the screws' level. When you mount the noctua's bracket nearer to the rear fan it means there is a 2-3 mm gap that makes impossible to mount the cooler. You can solve using nuts to reach a similar level, as I did, but then you have to force the motherboard to reach the processor with the cooler. Furthermore the 12400f supports 1700LGA which means you have to use the number 2 hole in the base brackets (NOT THE 1 AS SAID IN THE VIDEO, for 1700LGA it's written in noctua's user manual). Ok, temperatures are 30 degrees better in average which is insane, but I needed 1 hour to mount the cooler and honestly I'm lucky I didn't break the motherboard.
NOTE: If you're able to install the cooler, no space problem with gpu and ram (4060 and 16gb for me). Sure there is an amazing noise difference and the temperatures in gaming are cut by half ( I just installed the cooler and nothing else: no other fans, no tape which is ugly to watch).
NOTE 2: If you install the cooler and nothing else, you don't need any cable, splitter or anything: just remove the stock cooler 4 pin connector and connect the noctua's one.
NOTE 3: As the screws kit in the description is unavailable, any other m3 should work you just need 10mm m3 and their nuts.
Hope it helps someone.
Hello! I am currently thinking about doing this to mine. Any way we can chat more as I'm a bit confused and I could sure use the help/advise on how to not mess it up!
Just info for upgraders:
I installed Noctua NH-U12S REDUX on my Acer N50-620 yesterday.
You need 4 M3 screws (I used 10mm long like in the video) to attach the brackets to the motherboard.
Temperatures went down by 30c, which is way more than I expected.
Only issue is, the case can't close completely as the fan is too big for the case. I think I will puncture some holes on my side panel later so I can close it fully.
Having the side off is not the end of the world but yes that cooler is a little large for the case but it really cools the crap out of it.
Cpu should last 5-7 years now.
"one thing about applying thermal paste. Do not verge it"
Actually had me in tears. Absolute A+ delivery and advice
That video Silll cracks me up till this day 🤣
This upgrade was exactly what I needed! My temps weren't unreasonably high to start with, but the exhaust (rear) fan had a harmonic resonance (sounded like blowing across a coke bottle) at medium load. Adding the small fan to the front (and covering the meshy vent on the side cover) killed the noise completely.
happy to help!
Thank you for the N50 content. I had bought one of these a while back on sale and immediately sought out any info on upgrades. I followed your tips and added noctua fans and a nh-d9l cpu cooler - super quiet and good temps.
I just swapped the Chicony ATX12VO psu with a 750 watt corsair sfx + ATX bracket and I used the COMeap 24 pin to 6 pin adapater (from amazon) and to my surprise it worked! It's been running fine so far. Just thought folks might like to know.
Also, there might be a way to pry those drive bays out (if you don't need them) and increase airflow from the new front case fan while allowing more space for something like a triple fan GPU to actually draw some cool air.
Thanks again for the great content!
Would you have a link to the adapter?
just finished installing both fans and the heatsink . . was a little nervous as i dont do much (any) pc upgrading or repair and I must compliment you on a well done, easy to follow instruction video. very helpful , and probably saved me $100-$200 vs having someone do it for me, and i highly recommend that anyone tentative about upgrading their pc check out your videos.
Thanks!!!
Thanks for the Nitro 50 videos. Just got one and enjoying your helpful advice. You make it simple enough for an old fellow
I Try.
Great tutorial, TNW! I'm not sure if you mentioned it, but to the people reading this: be sure to press the power button after unplugging the PSU to drain the capacitors just in case, as they might hold a charge that can shock you and potentially even short your hardware.
Thanks for that!
@@TNW1337 is this the same high priority as say upgrading the ram? Or will I be okay if I use the PC for a few months before I do this exact cooling upgrade?
Also, would you suggest doing the Duct Tape Side Piece Mod without doing all the other cooling upgrades? I just got the Pc yesterday and haven’t done anything to it, so wondering if I should cover those holes right now.
(Uses; Valorant, CSGO, Overwatch2, 1080p Low 90-120fps or the closest to 120fps as possible) My Monitor is 1080p - 144hz so that’s pretty much my limit for now anyway.
i highly recommend for everyone who only has an ssd to remove the hard drive tray thing that is in front of the intake and below the gpu. just a couple of rivets to drill out from the outside of the case and screws to remove and it pops out straight away. dropped my gpu temperatures almost by 20 degrees when i also added an intake fan like in the video.
the tray blocks fresh air getting into gpu intake so this is a must do if you want to run your gpu near 100% usage without overheating.
i can now play pretty much any game on ultra graphics since the temperatures barely pass 70c.
if you have a hard drive in there just come up with a smaller tray for it or something because removing the big hunk of a tray thingy is the worst. really an engineering fail in this case.
thank you technitwit for the amazing video it helped out a lot!
Can you help me in removing it? Do you have steps to it?
@@Devyxn It's ok with a Dremel
@@Devyxn sorry for not responding. it's really easy, when you flip the computer to see the bottom, you'll see 4 rivets right where the tray is. i used a drill to slightly drill out the top of the rivet and then it came off.
thx for this guide. I changed the CPU cooler to Noctua NH-U9S and put in a Noctua NF-A9x14 PWM as intake, and a Noctura HF-A8 80mm as outtake in the back, and ducktape on the sidepanel. Just ran Cinebench for 30 min, with temps at 55-59 C. Before the upgrade it was soooooo hot and noisy.
again THANK YOU so much, YOU ROCK!
I5-11400F just as info ;-)
Nice work! Thanks!
Cool !
When i saw this video i immediately ordered the cpu cooler and the extra noctua fan. I have the nitro 50 with 3060ti blower style fan and i tested the cooler in 4k gaming (AC valhalla and odyssey) for a couple of days and the cpu temperature dropped from 80 degrees celsius to 45-50 degrees and never went above this threshold whilst in 1080p stays around 40 degrees. Thank you so much for this tutorial! It was really easy to follow and all steps and commentary were extremely helpful! Keep up the good work!
Thanks for the Review of the Video! I happy it helped this is why I do my videos. Well its also my job to :). But who said you can not love your job well doing it!
I’ve used a few of your videos for upgrading this PC in particular just because I wasn’t sure what cooler would fit properly and what I’d need to make it fit properly. Took my CPU temps down from 89°C average even while doing mundane tasks to 57°C average while under a full gaming load. If you have this specific PC, I encourage/implore you to make these cooling upgrades. Love the content and thank you much for your help!
Thanks for putting up this video and the hassle of upgrading this POS. I was helping a friend's kid buying their first gaming desktop. Rather than building one from scratch, I opted to start them off with a pre-built Asus as oppose to an Acer.
While both brands offer similar specs and price, Asus seem to put more standard parts and cut corner that is commensurable, like crappy CPU fan or RAM. This Acer is just a POS, non-standard case, non-standard board.
Brooo thank you so much for this guide, I recently upgraded the Nocuta fan on my acer and the temperature is significantly lower and better!
That's Awesome! glad this helped!
I received the S version of the tower cooler . Middle hole fixing on the bracket for me. .. no need for the splitter when purchased with the noctua NF-A9x14 fan either as there's one included . Great guide 👍 , reduced my overall temperature by around 20°
Thanks for sharing
Exactly what I've been looking for, thanks for this detailed video!
Man, amazing such a little change, makes a big difference.
Yes it is air flow change alone the tape lowers overall temp by 3-5c
@@TNW1337 hey is it possible to swap the case in hte Nitro 50 RTX 3060 i5 11400f?
Thanks alot, been waiting for this.
:)
did these upgrades (same noctua cooler, the noctua fan and paste + the tape on the side panel) to my acer nitro n50-610 and max cpu temp while heavy gaming went from 81C to 59C and average temp must be between 25C and 30C down. If you're watching and aren't sure if you should do TNW upgrades on your nitro, do it.
Thanks!!!
I am glad i´ve found this video. It´s very entertaining and i learned so much about the Acer Nitro 50 about how to build it and which item i should bought. Thank you and keep it up!
Glad I could help!
you could use clear tape so you can still see the red light or thin plexi glass.
That is true, didn't have any clear tape at the time.
Thanks for this video man, helped me a lot. I bought 50-620 with 3060ti. CPU temps dropped about 30 celcius, but GPU is still as hot as it was - 80 celcius ;/
Yeah Not sure why they drop them with single fans but they run very hot.
What temps did you have before I'm experiencing really high cpu temps and I don't know if I should be worried.
@@Bean-tu8if 80-90
Excellent video my guy. I have an extra NH-D14 lying around and am considering trying to fit it in the N50 case. Might be a bad idea but in theory it should work. And yes, I'm prepared to rock it with the side panel off since that definitely won't fit back on.
Lol it would cool it nicely
Hoping you do a video for the AMD AM4(Ryzen 5 5600G) socket since it needs backing plate, and cant remove back case cover. Great Vidz Dude!!
Noted! You can adapter any cooler you like if you go and get the same thread screrw's, M3 16mm or 18mm haved worked for me in the past. Had to do this with Hps.
God bless you for this video!
Yes any time!
good vid, im newer to gaming desktops so your videos are legit helpful 👍
Any time!~
Thank you for this video!
Welcome
Your vids are helpful. At this point, I’m buying a new motherboard, new case and new fans and using the parts from my nitro. The stock case and fans are giving me too many roadblocks.
Not a bad Idea.
Could case swap it into a CoolerMaster NR400. Able to use stock PSU and motherboard.
@@tonyboraggina6223 was it hard? Did you have to resort to any non trivial custom workarounds? looking for a apt case
@@rvnclaw9914 it was not hard at all. You just have to work around the extended motherboard for cable management. You lose easy access to front io, but I used usb 90 degree extenders to route the access to the back of the case
@@tonyboraggina6223 Ok, thank you m8
Thank you I was considering upgrading my case and that’s a lot of work so doing this is better
Yo I love this his videos are informative and great overall
Welcome thanks for the love
@@TNW1337no problem man
Thank you!!! You're the best
No problem 😊
Does this work with a 3060 in it? Seems like it would block some of the bottom air intake.
Hey man Great video!! Super helpful and plan on ordering that cooler to upgrade my nitro.
To clarify do I need to by the screw kit in order to install that cooler or did the cooler come with the proper screws?
You need the Screw kit for the cooler 100%
Yes, otherwise you’d have to mount the Intel bracket on the backside of the MB for the cooler to sit on the chip.
really nice! I am having this pc, just with the 3060 version. Thinking about doing something for its getting hot now after more then a year
Good idea it will help with performance
@@TNW1337 I will try to build it within the next few weeks. since i order from germany you wont profit from the links :(
sir can you please provide a video on how to replace the vga rtx 3070 for acer nitro n50 620 pc which only has 1 8pin and 1 6pin power cables, because the rtx 3070 requires 2 8 pins, should I replace the psu or what? Thank you
They make apater cables on amazon you can turn a 6pin in to a 6+2 no problem.
Thanks for showing some tips. Have the same pc and its giving alot of overheating issues.
Glad I could help
Another cool video.
Thanks!
Thanks for the video n50)))
Welcome!
What Nitro N50 did you have in this video? I have N50-640 and considering upgrading my fans.
Also the RGB cooler is out of stock, is there any other thas has the right size & screws with it? No need for RGB necessarily.
Personal results with stock using Cinebench multi core:
Room temp 25C
CPU started throttle after 84C, from 4.3GHz -> 3.3GHz, and stayed around 79C after that. Later I repeated and it peaked 88C and same throttle and kept around 80C.
I think I need upgrade desperately :D I feel like it's a bit unacceptable for 1300€ pre-built PC to behave this way.
Could undervolting help? I have i5-12400F
That cassing is a disaster. Did I buy that? Yes! Thank you for that vidéo, hopefuly I will save the day.
Thank You For Making This Video TechNitWit.
Very helpfull video,
just wanted to ask, since this is my first time dabbling in PC upgrades, are the standoffs in the intel and amd kits for the motherboard actually included in the Noctua NH-U9S?
Sorry English is not my first language and was doubting that I was missing some crucial informations.
Yes
Amazing, going to get a new cpu cooler to keep temps down.
Good call!
i have about same system i don't have no over heating i here fan come on sometimes on some games i play i bought it over 2 years its still works great
Yeah Mine would get to 90+C It could be 3 things. Software like a fan controller, 2 Heat sink was changed or they used a different brand fan. 3 or they apply the thermal paste bad. The thing is though I can reproduce the overheating with my thermal paste. So I am leaning towards Fan or heat-sink change. With Stupid vid a lot of stuff was change or add because they could not get ahole of it.
thank you for your n50 nitro videos, they helped me a lot, do you think using the app "nitro sense" to control fans and using them at 80/100% is bad? or fans will keep working well?
I will be fine imo.
i have this pc too its an i5 12400f and i bought be quiet pure rock slim 2, so i cant install it on my cpu could you tell me how to do it?
Hello , thanks for your precious video . can i duct tape all the holles on the side panel ?
Maybe i'm gonna create something with plexiglass if it's better to close this panel
For now i just installed the noctua fan on front
all I am doing is make the fans pull fresh air from the front, so yes you could but I got better results with leaving some of the side open. test it it is only tape pull it off if it gets hotter.
@@TNW1337 thanks a lot for your answer. You are so helpful
come bend metal come bend metal with meee !!! that stuff was hilarious in one of his shorts
:)
Love ur vids is it possible if u could take the motherboard out of the acer nitro 50 and put it into another case because I’m curious how u do it
I have not tested it but the screw patter looks like it is atx standard. problem is power button would be gone.
Hello Nit, why is the fan blowing upwards and in your other vid to the back? Because the warmth from the graphics is going through the fan? Anyway, I did the full upgrade to RTX 3060 12 GB and 32 GB ram. It’s a beast idle at 30 and gameplay 65. So your other vid with the noctua and other fan works flawless 👊🏼
It s better to put the fan inside the case, not enough space for air flow outside (due to plastic pannel)
I got it to fit I can not fit it on the inside with out drilling out Rivets.
Shouldnt you tape all side? When there is space between graphics card ventilator and ventilator added on front there is air coming in. So my question is, is it better to tape all side or tape how you showed on video? And next question should the added fan blowing air into case, or out of the case. Last question, can you send me list of items i NEED to buy, because in description you added like 10 kits of screws and I dont know how much should i buy. Or maybe i can buy only single needed screws. What are needed screws name and numbers. I would be very gratefull if you respond me. Cheers
Is this still a problem on the N50 - 650?
Yes
@@TNW1337 good i didn't buy it then lmao
@@dinglingwang what did you go with?
@@TNW1337 a Dutzo prebuilt, really nice airflow case with a 6800 XT and a ryzen 5 5600x
@@TNW1337 pretty nice upgrade from a gtx 1650 lmao
Can you please do a case swap tutorial?
can i swap the case for this pc and still keep the motherboard?
I do not think so. it does not look like a Standers ATX screw Pattern, also you would lose all the front I/o. Best thing to do would be get a new case, Mobo and PSU & cheap heat sink.
Yes you can, but like TechNitWit said, you will lose easy access to front IO. I used a CoolerMaster Nr400 case and just used some 90 degree adapters to use the front IO slots through the back of the case.
I just purchased a version of this PC to tie me over until prices go down. Ryzeb 5 5600g processor - gtx 1650, 8gb ram, 512gb ssd. Putting 16gb of ram in it ( 8gb by 2) - a gtx 1660ti I have and looking to upgrade the cpu cooler as well. Do you think the AMD wraith coolers will be a right fit with the Mobo? I know you have the Intel version and might not be sure. Figured its worth a shot asking for an easy upgrade chance
If it has the normal Black plastic mounts yes it will work.
hey could you do a case swap maybe? I have this pc and im just looking to reduces as much noise as possible
Yes it is planed. A aio would help with noise.
I was able to swap the case to a Cooler Master NR400
Is possible for you to try closeloop liquid cooling install for this. I have this pc since 2019 and Noone has posted anything about any mods until you did.
I have AIO video planed in about 3-4 weeks.
What do you think abut SilentiumPC Fera 5 Dual Fan in this case?
Hey nice mod Technitwit!
Where do i plug the rgb fan into the motherboard if i want to run the lights?
It is a 3pin ARBD you need a Hub that can do 4pin to 3pin.
Can you add a new cpu to the n50-610 or no because i have a rx6650xt and i have 32gb of ram and im wondering if the cpu is the reason why my game lag crazy
Could be game settings
Hello, please tell me, did you buy a cooling system and a fan, as in the video, do you need any more wires or adapters? Sorry, English is not my native language)
i have added the extra cooler how do i change the rpm for it because its not showing up on my bios
The fan that came with the Noctua was a 4pin PWN or 3 Pin PWM?
is only noctura suitable for nitro? are there any other cooling? I I wanted to replace the cooling without replacing the bottom mount from under the motherboard
Nope just what I showed.
I love the videos. One thing I noticed though is my n50 with the Rtx 3060 single fan runs around 80 degrees if I turn up graphics on 1080p. The frame rate is amazing but I’m thinking I need to case swap this instead of just change fans. I’m not sure. It’s my first gaming desktop.
I thought about case swap as well but apparently it's a another harder with a prebuilt like the N50. My first desktop too.
I see it like this build your confidence on the acer then do a case swap. You will need 4 things. Case, Psu, Motherboard & a Cpu Cooler.
Quick question is the mounting bracket for the cpu cooler already installed? , I'm at 7:44 in the video and it looks like it is but just wanted to make sure it was because some cpu coolers require you to take out the motherboard and install the bracket on the back of it.
Never been better with this upgrade, @TechNitWit But can you recommend any other CPU cooler besides Noctua? Any other that is cheaper and more budget that fits to this acer nitro PC?
Btw, Thanks For the Great Content!! Keep it up 🙌
ID-COOLING
@@TNW1337 Very Sorry I mean CPU Cooler, what type specifically? Because after some research they had a different mounting system compared to Noctua (example: IDCOOLING SE-902)
used this bolt advice to install a si 100 thermalake . thanks
Hello. Were there any problems when installing the tower cooler? All the spare parts from the kit? Is the tower on the processor?
No I list every thing need in the video. Just getting the noctua kit by its self will not work.
Judging by what I see in your video for the NH-U9S, the Noctura NH-D9L (double heatsinks with fan in middle), that you also said can be used, will provide airflow rotated 90 degrees to that of the Noctura NH-U9S when it's installed.
ie From top to bottom in the case, whereas the NH-U9S when installed flows the air from the front of the case directly at existing back case fan.
Is this correct ?
I found the splitter cable. unfortunately the RGB fan I got was too big for the vent to mount on the front panel
That sucks
Will any philips m3 10mm work? If not wich would work and how long does it need to be?
Thank you in advance!
Fan screws I believe need to be 16mm for both, Yes any M3 screw should work as long as it is long enough. Cpu need 10-12mm
I decided to change cooler, but can somebody tell me if Noctua NH-C14S 140M Fan will fit 100% ?
The Acer has more room then the Hps do, so yse it should work you will need to put in on the cpu side of the heat sink.
where exactly did you connect the case fan? i can't find a 3-pin connector from my motherboard..
I used a Pwm Splitter Cable.
@@TNW1337 thanks!
something change if i use of another brand Fan PWM Splitter Cable like the GELRHONR PWM Fan Splitter 1 to 4 Converter Cable, 4 Pin PC Fan Splitter Extension Cable Suitable for Computer Case 4 Pin/3 Pin Cooling Fan - 3 m and use of another brand m3 10mm screws
sure
A whole screw pack would be too expensive for me but do you think buying just the m3 10mm screws would do to get the CPU cooler on?
Is it Celsius or Fahrenheit? 1 c is like 32 f
All muserments where done in celsius.
there are three cables not sure which I need. I got the same RGB fan you use for front panel.
in video.
Can you do a CPU cooling upgrade for the Lenovo T5 tower?
Yes
Could use flat white tape to diffuse the lights might look alright?
Is it worth only adding the first fan, will it have significant impact?
It does help every thing you change helps.
So I want to buy the NH-L9x65 instead. I was wondering if the instructions to installing it change or stay the same. Do I also HAVE to buy the splitter? Can I buy any M3 screw kit? How much of a difference is the thermal paste that comes with the cooler and the ones you used and how much of a difference is the cooler I will be purchasing compared to the one you installed. Sorry, there's a lot of questions but I would appreciate it if you could answer them.
Yes you will need the splitter cable. it is not to much like 2-3C with the paste. it is pretty much the same thing as the video just swap it in.-
@@TNW1337 Thanks for the reply, I understand now. Appreciate it.
Is that a good idea to tape the side panel with holes?
It worked for me
Im thinking of the front fan upgrade, but im confused by the wiring, did you split the cpu cooler cable for the front fan 4pin to 3 pin and 4 pin?
Edit: also does the front fan blow air in while the rear one out?
Is it possible to change the red LED lights with a rgb strip, i mean does it support RGB because i would like to change the color of those LED’s would look cool to see another colors!
no it is not there is a RGB header on the Board if that is working and there is software to control it sure you could. I have not tested.
I do recommend to buy a Cooler Master NR400 and swap the pc in it, plus two 140mm Noctuas and a 120mm exhaust.
Hello, I would like to know what video card was and the difference after replacing the case.
@@johnsheppard6360 Hi. Card is RTX 3060 with turbine. I removed the turbine and stuck two Noctua 92mm with zip ties. The case has two Noctuas 140mm as intake. GPU is around 72c while gaming, CPU around 48-55c (but I swapped the stock cooler). Way less noisy too.
@@pinkoball4165 Thank you.
Can you give me a link in amazon for a side panel that will fit in the acer pc
Not sure what your asking for, do not think you can order a extra side panel.
Is becouse I want a clear panel
@@2Siq. After a bit of research in the past i've found this case does not have an aftermarket Clear side panel. I've managed to cut and dremel one myself for about 40$
Will this upgrade including the graphics card work in nitro 50-610!? Hoping you can answer me. Id very much appreciate your input
Hello. Could you tell me what is the size of the screws because i can't find correct screws anywhere so I need specific size. Thank you.
M3x12mm
@@TNW1337 thank you very much 😊
This may be a really dumb question, but I’m new to pc. Do you plug the fan u install in the front of the pc into the motherboard?
Correct you Need a Splitter cable PWM 2 or 3 Way.
I noticed the orientation of the heat sink is different in a couple videos, is one superior to the other? I currently have a 3060 ti in with the upgrades and have the fan pointed down towards it.
I got one of these, no overheating here. Ran a game at 90fps while downloading another game at 35MB/sec and my cpu only hit 75C and gpu 60C. All good
Hey! i'm from kazakhstan, sorry for my bad english, can you please give some advice? ID-COOLING NO-9215-XT ARGB Case Fan 15mm
Did you buy a splitter for it? I want to put FANS2 in the upper left corner, this port is not suitable? answer please. and I also want to buy this one for the front cover, do you think it's normal? (be quiet! Pure Wings 2 PWM, 9.2cm)
drop at least 5 degrees? thank you friend
oh yeah what case would work for the n50 640s motherboard? and also what type of mobo is it, i couldnt find out anywhere?
REALLY IMPORTANT QUESTION! Will the be quiet! Dark Rock Slim BK024 fit acer nitro N50-610?
Need some suggestions for new mid to large case for Nitro-50-620. Stock case is small and has poor ventilation.
Thank's, can we changed the power supply on this computer ?
So do I need an adapter to make rgb work on on the case fan? I have the same pc and am following your upgrades.
Acer has a 3 pin the fan i think is a pin so yes.
Hi, I bought this PC one month and a half ago and it is a problem today, I will order the cooler from noctua and I will come back in a few days with an update
Did it work?