Peugeot 308 not starting. P1078 P1067 and P1015. Valve lift system faults. Fault finding and repair.
HTML-код
- Опубликовано: 18 сен 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This Peugeot 308 1.4 petrol (Engine 8FS), came to me from another garage as a non runner.
On the ECU, the car reported faults with the valve lift system:
P1078 - Variable valve lift motor control fault
P1067 - Variable valve lift motor control fault
P1015 - Variable valve lift system fault (Power part of the motor relay)
The above however, was not the only thing preventing the engine from starting, if was at all the above that was causing the non starting condition.
Nevertheless, follow me on this video to find out what was causing the variable valve lift problems, and why the car was not starting.
Hope you enjoy the video.
Any comments or questions, please put them below.
Like always, thank you for watching!
Thank you for another great video!!!
For PSA cars, factory scan tool is many time necessary. Only disadvantage is there is no graphical presentation of Parameters and there is no fuel trims.
Greetings from Serbia.
Thank you for watching and for your comment!
👍👍👍
who is that one who disliked video?i dont see any problem with this exelent video-anyway this 60+ think opposite-go for it because you are the man
ivan basic
Thanks... I am not planning to stop anyway!...
Excellent presentation, this video has help me massively. I have a similar problem with my daughters 1.6 VVt. This has given me good direction of what to look for. I have checked the fuse so I will now remove the rocker cover and check the motor and soleniods. Thank you.
That's great... hope you get it sorted!
Thank you for watching and for your comment!
Did you find the fault in the end? I have a similar issue with my sisters car.
Hi from Greece I like petrol cars , thanks for posting
MrT
Thank you for watching and for your comment!
Great Video again ! I think I watched it twice but it makes more sense now after digging into that variable lift system. I'll bring my DS3 to Citroen next week for a chain check (noise) and will let you know the outcome... This engine just looks like mine, unfortunately Sedre does not get to find the injection drawing for my 5FS ! Keep up the good work mate ;)
Jérémy Mougey
Let's us know how it goes...
Thank you for watching and for your comment!
Just changed timing chain and guides on a pug 207cc 1.6 thp 150 turbo (looks identical apart from turbo). Valve timing out due to missing 2 teeth on bottom sproket. Pig of a job. Hate the PUG/BMW engine. Big Thumbs Up
Mike James
This system is quite prone to fail... luckily this one was still mechanically good...
Thank you for watching!
Well done! I like the way you discuss it easy to understand.
jessie ganaan
Good to know...
Thank you for watching!
You are testing the intake valve system. You should test the EXAUST side like your scanner says.
Hi
You surely haven't watched the video all the way... or you have skipped it...
Thank you for watching!
Thank you so much for your year-long useful videos Merry Christmas.
Merry Christmas!
🎄🎄🎄🎄🎄🎄🎄🎄
hi, Nice video, the variable motor gives very hard start also, had the same 308 issue myself , but I only go as fuses & check motor powers & ground , unless guys are going to pay to check wiring to the ecu. My customers cry about paying for in depth stuff like you do. :(
Lee Rattle
They do, don't they?
Sometimes I don't really understand what they expect...
Anyway, thank you for watching and for your comment!
Sry to say but as i was watching video, & you 1st dismissed the fuse for being to themotor , I had a lil chuckle to myself, cus that is exactly the issue i had. But luckly for me I found the blown fuse & rechecked it :) , even tho no reference to the motor. :(
Lee Rattle
👍
How you have helped me so many times thank you. I am stuck with this one though. 2010 pug 207 1.6 petrol 5FS with really random codes p0522, P15a8, P023A and a strange one U1308. Oil press sensor checked, I feel defeated.. I am getting "battery charge status unit" error code but cannot access it..
Hi
It looks to me that there is one problem causing all those issues...
Check BSM for water ingress... check ABS plug, wiring, earth points etc....
Thank you for watching and for your comment!
Exselecte diagnostic amigo. Nice. Video
Mechanic Technician Repair
Thank you!
Man I love turning wrenches, but wish I had your skill set behind the computer
😊
It is a learning process...
Thank you for watching and for your comment!
hello please help. unfortunately I don't know English and I don't understand what you are talking about in your movie. I have a peugeot 3008 1.6 vti and I have the same errors. How did you fix it? greetings
Same as any car that won't start. Check the fuses and change the spark plugs.
No always.. but it is a good start...
👍👍👍
Parabéns pelos vídeos, muito bacana seu trabalho, continue assim sempre.
William Simberg
Obrigado!
Good job. What software do you use.... Grest video man
Here I was using diagbox... along with sedre... if I recall correctly!
👍👍👍
HELLO THERE. PEUGEOT 308 VTI ENGINE. P1015 AND P1062 FAULT. WHAT SHOULD I DO.
Check the variable valve system...
Motor, position sensor, etc...
Thank you for watching and for your comment!
Hi Sir Thank you for all your nice video and research. I am from Holland. And I have a problem with cold start 1.6 vti engine peugeot 3008 120 ps. It is rough idling for 30/40 seconds. After 2 seconds being at 900 rpm it is ging to 1200 rpm and than slowly going to 900 rpm. So at this time it is idling rough with I think some misfire for at least 30 seconds.
And after 30/40 seconds it is running excellent. The whole day I have no problems with starting the car. And this problem is happening every morning.
Do I have to reset adaptations valvetronic unit.????? I don't get error codes or emission light on. Or is it the viscosity of the oil. I use full synthetic 10W-60 because this type of engines like oil consumption. Thanks Chris
as usual for me a fantastic video. brilliant explanation. I wonder if you could advise on the peugeot new interface I too have one about 8 yrs old but had a lot of trouble with the softwear. many thanks colin
colin Lyne
Thanks Colin!
I have only used Diagbox a couple of times... I have used Lexia and PP2000 for many years... I must to say, that I never really had major issues with those...
Diagbox seems ok, but I think I need a bit more hours of experience with it before start to comment...
Thank you for watching!
Hello. Is it possible to make the Peugeot 308 sw 2010 Euro 4 show when to change gear?
Hello. Maybe you could say whats wrong with opel zafira B 1.8 petrol. 2007 y. Turnings does not turns off automaticaly. Is it possible that it is bad steering wheel rotation sensor ? if that possible, can try to replace it from other car ?
I have a Peugeot 308 5FW engine ,it's has smoke coming from the top of the tappet cover...what could be wrong?
Great work again! Liked that you took the rocker cover off so could see how it actually works inside. I'm guessing those plugs haven't been changed in a while but the head looked really clean so the oil or car hasn't been badly neglected. Pretty poor someone broke that electrical connector, it's not like you can get replacements very easily :( Also interesting the other "alternative" fuses used on that car. I've never seen those before! Thanks again for sharing, Really admire your patience and thoroughness!
thejoneseys
Hi
Thank you so much for watching and for all the points you made...
👍
i think there called maxi fuses
Nice video! I will get the same model tomorrow with the same fault code to diagnose. I see this video is from 2 years ago, right now the maxisys does recognize these fault codes and gives the correct discription. What software did you use on the laptop? Is that original peugeot software? I despirately need wiring diagrams for peugeot citroen etc. Hard to find on the interwebz
Hi
Don't know if Autel updated their dtc description in the mean time...
On the laptop I'm running Diagbox for diagnostics, and Sedre for diagrams...
Thank you for watching and for your comment!
@@LMAutoRepairs I have the exact same fault codes but but after fitting new plugs and bridging the fuse on the battery it's till not fixed
I c3 vti 1.6 DTC P1067 - P1050 - P1015 .
Is problme motor valvetronic ? Or ecu engine ?
hi lm really informative video, i have a citroen similar fault codes, similar problem not starting, the relay is stuck as yours was and if i power the circuit like you did it comes on, is the relay fuse box needs replacing or the bsi is not sending the signal to the relay to close and come out of sleep mode and power on car, thanks again for the video
You need to measure it... see where the signal comes from... without looking at diagrams it is difficult to tell...
Thank you for watching and for your comment!
@@LMAutoRepairs thanks for the repy
Fantastic tutorial.... I don’t have a computer for diagnostics but I did this test as I believed the lifter motor was stuck. I connected my test wires exactly as seen in the video and the motor moved... switched wires over and it moved back again... I thought I would try it one more time but this time there was a tiny spark at the ecu plug when connecting the probes and now the lifter motor won’t move anymore, have I blown the relay or a fuse ??? Timing chain had just been done but the car would not Rev past 1500 rpm, now it won’t start at all 🤔 any help on the fuse or relay or what I need to do to now to fix what I’ve blown 👍
How exactly have you tested the motor?
You have not put any voltage into the ecu, or have you?
I connected my probe wires exactly as you have done in your video, the motor rocked one way, I then reversed the probes and it rocked back the other way, I tried it one more time and there was a tiny spark at the probe and the actuator wouldn’t work again... so I’m guessing I’ve blown a fuse maybe ?? If I have blown a fuse then I’m unsure which one and where to find it ?? Thank you for your reply 👍
If you did it the exact same way as I did, and your car is the exact same as the one on the video, as you have seen the motor connects straight to the ecu...
So, unless your motor somehow has shorted and when you plugged everything back it burned some fuses or your electrical system is different and something else happened...
It is difficult to say...
All the fuses are on that box in the engine, and inside by the glove box on the BSI...
Check everything!
@@LMAutoRepairs the car is identical to the car in your video 2008 Peugeot 308 1.4s.
Thank you, I will check all the fuses and hopefully find the fault 🙏 👍👍👍
🤞
Very good job, thanks again for sharing such an interesting video.
ALI mohammed
Thank you for watching!
Really great work again!😃 could you tell me mate,did you have this Diagbox/ Lexia online or offline software? I was going to get Diagbox 9.129 with the newest software included Lexia and Ds model. Can you program or coding??
Offline...
I believe the more recent ones for programming and coding need to go online...
👍👍👍
@@LMAutoRepairs so did you recommend this Diagbox? Because I’m just wondering if it’s more powerful than Autel and help you better diagnosis? Or is same like Autel with all functions we have?
@przemekfryc5495
You can't really compare... Diagbox will only do peugeot and Citroën...
Autel will do many other cars...
If you need a tool just for Peugeot or Citroën, Diagbox is a good choice, if you ever need to scan other cars, the the Autel or other similar tool...
@@LMAutoRepairs Yes absolutely understand. I have 2 autel and other computers for diagnostic but I was gonna ask if Diagbox is much better software to compare Autel Software for Peugeot and Citroen? Or does it have more options diagbox??
@przemekfryc5495
Diagbox will have more options, but some will require online access to a PSA account...
Will also give you some extra info that Autel does not, like expected parameters on live data etc...
Great video,
What software you use to get, rhe wiring diagrams ?
Soufian Attar
Thanks...
Sedre...
Excellent diag. Did you do any testing to see what caused the fuse to blow?Cheers
tecnaman
Hi
I checked everything around... but couldn't find anything...
Someone has been there before me... so you never know...
Thank you for watching!
Great video! I see you used your laptop to reset the auto adaptions but Is the Autel scanner capable of doing this somewhere in its special functions? I know the Autel is able to do the relearn for the throttle body which has a similar procedure. Thanks in advance!
Yes, I believe Autel also does it...
Thank you for watching!
My 308 has the exact fault codes and new plugs and bridging the batery fuses did not solve the problem, it still stugels to start and when it does it just stals at random
Hi I've got a 406 petrol ew10 that starts high idles then dies. Got p0341 code
Hi
That code seems to point to an issue with the camshaft sensor...
Thank you for watching!
Hi there, we have a 2011 Peugeot 207 cc in limp mode with a p1067 and p1030, occasionally we get the p1078 and p1025 and p1015 codes. We are sure the fault we have is with the Valve lift. Is the 70 amp midi fuse on top the battery to do with the variable valve lift? Have ordered the fuse and hoping that solves our issue.
Is it worth replacing the solenoids and vv motor if the fuse doesn't work. What set up do you have to test the solenoids and motor etc? My obd is very basic and I think I need to take the car to someone with your set up. Any help would be greatly appreciated
Is the fuse blown?
I don't recall now without checking which fuse is for what... unless I have mentioned it in the video...
I would have it properly diagnosed before continuing to throw parts at it... as you can end up with an unnecessary expensive bill, and worse, still have the same issue...
hi nice job as always ! could you please tell me what peugeot diagnostic equipment you used in the video please ? best regards . tony
Diagbox...
Thank you for watching!
Hi Luis,
You have replaced the fuse but what was the reason the fuse was burnt?
Pass... maybe something done before the car came to me...
Unfortunately I don't always get the full story...🤦♂️
👍
Is that a man on the steering wheel walking in the dark because the car broke down again? Hahahahahahhah
🤣🤣🤣🤣🤣
Nice one...
Thank you for watching!
great work mate all for a fuse lol
Paul Mayou
Lol... indeed...
Thank you for watching!
HI Mate,
Thanks for the good video as always. very precised and informative.
I have a question. I have a friend that has the exact same model of car, the problem is, when my friend starts the car, the radiator fan turns on automatically without no one turning on something,
Can you guide on which step to take ?
Thanks in Advance
Christian U Nwaebe
Hi
Thank you for watching!
Have you scanned the car?
Look at the live data and watch the coolant temperature...
It sounds like the ecu is not seeing a reading....
Thanks for the response. i have scanned the car but no error. I will scan the car and look at the live Data.
Do you have any specific range i should be looking at from the temp sensor?
Christian U Nwaebe
The range will be the engine coolant temperature...
So engine fully warmed up 90°c...
Brother, the head of my engine has been opened. After setting the head, it is not starting anymore. Help me a little. Now I can't work as a mechanic. I can't. Please help me.
Hi, Thanks for your videos on car repairs. They are very informative and interesting. I have a peugeot 308 1.4 vti 2009. I have been having starting issue for the past 3 months now. Engine crank but do not start. It seems that the injector valves do not open. I tried to change ecu by transferring data from ecu to a different ecu. That didn't solve the problem but gave me some fault code at least. The code was P0014, indicating issue with camshaft. Therefore I have changed the timing chain set and still no joy not starting. There is spark but it feels that fuel is not reaching the chamber. Could you please help / guide me to find the problem..
Thanks,
Zavid
Hi
The camshaft alone should not prevent the engine from starting...
You have something else...
Check live data...
Thank you for watching and for your comment!
@@LMAutoRepairs Hi, Thanks for your reply. I tried my best but can't get it started. If you are happy to have a look and we are not really far of each other I am happy to bring it to you the Car. I really want to understand what is stopping this car from starting.
i am trying to get circuit diagram but not having much luck what is best program for this any help apricated
Peugeot, look for sedre....
Thank you for watching!
I bought the car with the eccentric sensor plug reversed! Is it possible to have destroyed ecu? The car starts cold, but when it warms up, if I turn off the engine, it starts and stops by itself! If I accelerate the engine when I start it, it does not stop, it remains at idle but a little under-revving, and if I remove the plug from the eccentric sensor, the engine works perfectly.
Please can you help me?
Check time, and check that the signal coming out from the sensor is correct...
👍👍👍
@@LMAutoRepairs I checked the wires and none of them are interrupted or shorted between them. If I remove the plug from the eccentric sensor and start the engine it works perfectly and if I stop it and start it again with the plug it still works perfectly and one more thing if I do the valvetronic tester test and start the engine it works perfectly and if I stop it and start it again it starts again it stops by itself! On the tester I have error code p2178 to rich mixture! Can you help me too, I'm from Stoke-on-Trent please for a fee of course?
hi,nice video..can u please tell me if possible to program peugeot 308cc 1.6thp bsi with autel maxisys ms908p
thankyou
Hi
If when you say programming, you mean flash a new software, no, it can't...
If you mean code or program a blank BSI, it can, but... I never tried it...
The option is there... so should work...
Thank you for watching and for your comment!
Hi sir...nice video and explanations...
My 308vti got issue with fault code p1056 power supply to vv lift motor short to earth ...tia if you could help...
Just follow the wires back to the BSM...
Could be a bad motor as well... test it...
Thank you for watching and for your comment!
Good video but why was the fuse blown !
juwee khan
Thank you...
As I have already said, not really sure, I have checked wiring and everything around, and could not find anything...
Someone has been working on the car before me, so you never know...
Thank you for watching!
Boas, já tinhas visto alguns vídeos seus, pensei que fosse espanhol, mas a tua filha denunciou te.
Por acaso não moras perto de Newcastle?
Continuação de bom trabalho. 👍
Boas!
Não, moro bastante longe...
Obrigado to ver os videos...
👍👍👍
Hi dear
I'm having a trouble with my 308 petrol and the problem is I turn on the car, all works fine, but when the car reach the temperature to activate the fan, the car turn on check engine light, works on 3 cylinder and Lexia say misfire cylinder 1. If I unplug some sensor(camshaft exhaust sensor or solenoide for exhaust camshaft) the car runs perfect but with check engine on.
That's the only error related with malfunction and another about thermostat
What I can check?( I change lambdas, injector, spark, bobine, camshaft sensor)
Check wiring...
Thank you for watching!
@@LMAutoRepairs can you share to me wiring diagrams?
I have been reading and some people says that the map sensor is the culprit. What do you think?
Any other sensor produce DTC code:(
Great video, thanks for posting. Is it possible to reset the auto adaptations with other software and interface such as autocom?
Idm Electrical
Hi
I never worked with that tool... but probably it is possible...
Thank you for watching!
Yes, it is posible.
beautiful work you're good
chikh bachir
Thank you for watching and for your comment!
Curious about where you get all those testers
💸💸💸💸
☺
I have the same car at the moment with similar symptoms so I just checked compression in all the cylinders and all but one had full compression would the variable valve timing cause something like a valve not to close to allow compression to build up?
The motor will lift all inlet valve together not individually you probably have cracked valve
good job mate i have a case of a petrol 207 peugeot no start case it through the p0341 i have changed the sensor nothing changed coils nothing happens no sparks at all change the whole immo system the same problen the same code any ideas
sadik mamoun
BSM ?
Have you checked wiring?
I have a video ready to be published that you will find interesting... was a similar problem.. stay tuned...
i will be looking foraward to see the video
sadik mamoun
😉👍
Buen video saludos desde España
Micky madueño
👍
Gracias...
Hei, Can you help with how to change ABS FUEL RELAY FUSE
Confused... ABS fuel relay fuse?
@@LMAutoRepairs this one
www.aliexpress.com/item/32843739738.html?spm=2114.12057483.0.0.5752598cQKlu1i
this one is the ABS Fuse That power up ABS Pumpe
hi. my 308 vti. 1.6 petrol.
fault code: p1015-p1067-p1062 P0443
Car engine fan work continuously.
Is the engine fan operation normal?
engine fan checked. no problem. fan role-heat sensor-
thermostat no problem.
p1015-p1067-p1062-P0443
fault code, engine fan Reason for work?
None of those codes shouldn't make the fan to continuously run...
But you never know... it is a French car...
Check live data... coolant temp etc... check that is not a stick/welded relay...
Thank you for watching!
@@LMAutoRepairs
thank. another question
. engine off fan off. engine start fan start. omn: 6545xf fan insurance. fan continues to operate when disconnected
. short circuit or brain malfunction
?
You should really have power probe in your tool set. It's brilliant tool for checking fuses and energizing solenoids or motors.
dlugas251
Hi
I know... is in my shopping list... it is a bit on money for now...
Thank you for watching!
LM Auto Repairs I have original power probe 3 which is quite expensive, but I found equivalent for 52gbp (less than half the power probe price) with bigger and much nicer screen and more functions. The only question is: how is the quality. It may be worth to consider buing that, but I don't know.
dlugas251
That's the thing... you usually get what you paid for...
I have the ETC2000 which appreciate the build quality etc...
I just don't want to spend £50, to then regret not have spent a bit more and the the right tool first time...
But I appreciate your help!
👍
👍👍very good keep up the good work
Thank you for watching!
Hi Mr, i need your help, how can i install new variable valve motor ???
Hi
ruclips.net/video/5Jl_poF35_A/видео.html
Myself or a fellow member will be happy to help!
Thank you for watching!
Hello , sir i have peugeot 308 2008 fault code p0341 inlet cylinder reference sensor signal Coherence and anti pollution fault. I have replace camshaft sensor spark plugs and crankshaft sensor but still fault appear as permanent. I have checked timing its ok. I jave cleaned solenoid valve and tested its working open and close normally. What should i do kindly advice. Many thanks regards
Have you checked wiring back to the ecu?
Thank you for watching and for your comment!
@@LMAutoRepairs sir i have checked 5v reference 12v and ground on crankshaft and camshaft sensors. If i erase the fault it comes back and shows as permanent fault.
@@sameerwarrich26
Check that there is no teeth missing or damage... a scope can be handy in that situation...
@@LMAutoRepairs thanks for your help. I will check that
17:16 sorted!!!😁😁😁
bodgit and leggit garage
Indeed... you have been an influence... lol
Thank you for watching!
lmsvvavr thanks a lot mate much appreciated always enjoy your videos too
bodgit and leggit garage
👍
Good thank you /But why Valve lift system r ther /for what !?(not the sensor )
i-Bird
Hi
Thank you for watching!
Confused with your question...
Sorry...
I mean i need to know !!What is the role of Valve lift system on this car
i-Bird
Ah... got you....
The valve lift system on this car, or on any other car fitted with this system, is the same... to increase the valve lift value... depending on the engine running conditions, that helps reduce emissions and helps the engine to run smoother and more efficient....
Something along this....
Thank you my brother
Thanks
Thank you for watching!
👍👍👍
Hi Mr, I have a Peugeot 207 1.6 VTI it doesn't start and i have this current code p1025 related to valve lift, can you help me please
Remove the cover and inspect...
Can you actuate the motor, and hear it running?
Thank you for watching!
P1023
P1694
P1025
How i can find diagramme véhicule 207 vti
Sedre... for example...
👍👍👍
Notei em vídeo seu que o Windows era em português, você é português ou brasileiro?
William Simberg
Português...
Is the snap on solus legend capable of this
Possibly... I never used one...
Thank you for watching!
@@LMAutoRepairs it does my friend that's made my job a lot less expensive well not considering I've paid for the machine but as you know there an investment thanks for your time
I thought it was a question...😊
thank you
Thank you for watching and for your comment!
👍
LM Auto Repairs can you halp me?
Have you scanned the car?
Good video
Global Car Parts
Thank you for watching!
Brother, the head of my engine has been opened and fixed. Now the engine is not starting. What can I do now? The mechanic has tried a lot. He has seen everything in the computer system.
Something has been missed... check timing to start with... make sure everything is plugged in correctly...
👍👍👍
আসসালামুআলাইকুম ভাই আমার ইঞ্জিনটা হেড খোলার পরে হেড সেটিং করা হয়েছে পরে আর স্টার্ট হচ্ছে না এখন আমি কি করতে পারি আমার একটু ভালো করে বুঝিয়ে বললে আমি উপকৃত হব
Hello friend, sorry, you will have the purchase link of the DIAGBOX
Aliexpres ?? EBAY?
thank you very much
Alvaro cutire
Hi
I got my one from cardiagtool.co.uk
Buy from there at your own risk....
Hope that helps.
Thank you for watching!
My Peugeot is not starting
hello where can we find the schema image?
Sedre...
Thank you for watching and for your comment!
Hello, i have same problem with, peugeot 207 vti 1.4, i cant start engine after test compresion, compresion is goood (11)... Can u give me mail or answer here, tnx a lot.
Hi
Any codes?
Have you looked at live data?
👍👍👍
Modelini sebenarnya tidak perlu dibina sering ada permasalahan gejala yang berperingkat tidak selesai...inovasi pintar sahaja boleh selesaikan permasalahan peugeot model ini
hi ,lmsvvavr
What is the difference between VVT Solenoid (VARIABLE VALVE TIMING) and the motor valve lift systeme ?
Hi
The VVT changes "When" the valve is going to open in relation to the piston position...
So to open earlier or later...
The valve lift, controls how much the valve opens...
To allow gases to escape easier, or to allow more air in... depends where the valve lift system is fitted, intake or exhaust...
There is a nice video that explains it very well...
ruclips.net/video/I5dy2Vnf95w/видео.html
Depollution system faulty code, how to solve this problem
That is a general message for engine issues... you need to scan the car...
Thank you for watching!
Great !
😊
Thanks!
👍👍👍
hi sir, i got no spark with prince engine peugeot 308. it wont start
Have you scanned the car?
Visually inspected etc?
Thank you for watching!
@@LMAutoRepairs scan but no error code. Visually everything is ok. Last time it's running, but due tue leak at thermostat housing, I got it changed. But afterwards, it won't start
@@mohdrizalmohdsyafie9678
If was running before the thermostat being changed, then I would go through everything that has been touched during the replacement...
As it might be related...
Great work, nice video. Where can I find this Diagram?
ABRITES USER
Hi
Google... is called sedre...
Thank you for watching!
Very nice job,well done,I would like to ask you,where can I get a PSA Diagnostic tool (DiagBox) like the one You have?
Auto Sport
Hi
There is loads of online sellers...
EBay can be a good starting point as well...
Thank you for watching and for your comment!
Is this a clone from China,or the OEM registered from PSA,as having a username and password that allow you to do things the clone can't?
Auto Sport
The only thing you can do more with the registered one, is the online coding and programming...
You can still do offline coding, and programming, depends on which software you use, is just that will not be to the latest versions...
I know that,but what I noticed is that you have the newest logos sticker on your cable,and it's in suite case ,with a VAIO laptop,I have Diagbox Version 7.83,but on the newer models with blueHdi (2017-->)I can't get a good diagnostic,as it's don't recognize all of the ECU,so can you please help me?
Auto Sport
You need to make sure that the interface has the UDS chip/protocol... which is used on newer cars..
My old interface, had the same problem, so when I replace it not long ago, I made sure that I would get the full version...
Be carefully, as the old ones still out there for sale...
Hope that helps...
would I be wrong to ask you where I might be able to get an update on my softwear?
colin Lyne
You mean Diagbox?
to be honest Im not sure I guess diagbox is the latest is it I really cant remember. It was so long ago
colin Lyne
Yes... it is the latest...
Google will help you find it in no time...
Hope that helps...
thankyou so much there are so many to choose from would I be wrong in asking for your opinion as to which is best many many many thanks Colin
colin Lyne
I am not sure what is the latest version... I am using 7.83... if I am not wrong...
Most of the packages out there come with the base 7.02 and then all the updates from version to version up to 7.83... surely there is higher versions now...
I actuate it by scanner but it no run
Gharbi Mecatronicien
You need to investigate why not then...
😉👍
Une demi heure de vidéo pour simplement remplacer les 4 bougies!!!! Pffff😮
No power on odp 😭😭
BM34
Is 308 Peugeot 2008 no spack
buen video 👍🏽👍🏽👍🏽 si queres un *308* segui en Instagram *308_official* ahi aportamos nuestros bebes!!! les envio calido abrazo Saludos
👌👍👌👍👌😝
👍