First Start Attempt On Newly Rebuilt Honda 400ex Quad....(Will It Run?)
HTML-код
- Опубликовано: 28 авг 2024
- First start attempt on my 2000 Honda 400ex. As you know I picked this quad up and first ride it locked up. I ended up tearing into the bottom end and replacing the crank. This is the first start attepmt since then. Will It start? #Honda, #FirstStart, #400ex,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.c...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Drag race videos are coming up soon! Stay tuned for those!
Please SUBSCRIBE and LIKE if you enjoyed the video! It helps me out a lot!
Thank you for all the support!
Tecate vs 450r
You need to do a q and a what was your favorite four wheelers and what was your first
I think you should buy a Warrior and Mod it it would be fun! 👍
@@c0munguyforcaz he has had a warrior
How many hours do you have in that rebuild man I love your videos
That feeling when you get something together and nothing went wrong is the greatest ever
Another great job. Glad I saw this one and noticed a chance to pass a little trick on to you and others. Watch your video and look how you're holding the oil bottle with the spout side down. If you hold and pour with the spout side up, air will easily enter to replace the oil as it comes out smoothly. Much less chance of the oil "glug, glug, gluging as it comes out and even if the bottle's full, you can hold it with the spout at a lower degree of angle to the ground. Give it a try, I think you'll like it. One more trick, when pouring automatic transmission fluid into your car or truck without a funnel, you can use the dipstick to guide the fluid into the hole. Just pull the dip stick partially out, leaving the tip inside, then put the mouth of the spout against the dip stick and pour slowly. Takes a little practice to perfect, but the fluid will follow a pretty sharp curve right into the dip stick tube :)
Bro good job on the rebuild but I gotta say you should definitely let the bearings break in before full throttle and wheelies lol
Shouldn't you be treating it like you're breaking it back in after a complete rebuild instead of just sending it
The piston and cylinder aren’t new. Just bearings in the crank you might want to worry about but even then it’s not a big deal.
Even if it was new I always beat my brand new bike rite from the get go 2 heat laps then send it ive never had any problems 4 brand new 450r"s off showroom floor
You should’ve done a full break in process for the quad before pushing it like that! But awesome job man!
Try nailing the wheelies in 3rd gear off the clutch a bit. Basically 25-30mph wheelies. I was wicked impressed with my lil 01 300ex, the torque on the shift was awesome. I started watching when I was gonna rebuild my 85cc rm and that was at least 2yrs ago. Now I look forward to posts, this latest one being the best!! Thanks to you!
What u should have done was build a stroker out of that motor and put a big bore on it cams port it and everything bore over or get a bigger carb fine tune it. that would have been sweet, probably could get decent hp with that stuff
Sweet video dude🤘🏻🤘🏻 it’ll be sweet to see the carbon quad back on the list of running quads🤘🏻🇺🇸
little tip for wheelies, put your left foot on the bar on the back and keep your right foot on the brake, at a stop, pop the clutch and try to get brake control. nice job on the rebuild by the way 👍🏼👍🏼👍🏼
Great vids!!! You should have a shootout with the 400s and the winner should race the tecate. We will enjoy.....
you did a great job on all the 400ex's and the 450!!!! keep up the great work. You are a 4-stroke man now!! lol
4 strokes are easy
@@ronniewilliz153 they are more complicated than 2 strokes wym
@@dttach3d not for me
@@ronniewilliz153 lol wdym?!?! 2-strokes have only 2 moving parts, the crankshaft, the and the piston.
@@2clappedout477 I never said who has less or who has more.lol 2 me 4 strokes are easy thats all i said an meant
Joe where is the good old drawing intro! Tb 2016 only know by the reall ogs🙌
good ol days haha
I’m tellin ya
That's how I learned to draw a dirt bike
Bro start that again
@@Austin-te2qc exactly
Tecate vs 400ex
Hope that video comes soon
yes soon!
@@2vintage yesssssss
I think putting the black rims from the other honda quad would look epic
Damn joe your killin it with these 4 strokes nice work🤘🤘
Stock jets? You probably need to re jet it for that exhaust/intake setup. Get that bad boy some fuel.
I also heard that noise when he was revving it before the ride. My raptor 350 did the same thing until I jetted it.
No break in period???
Loving the 400ex vids!
Nice job joe you did an amazing job awesome keep up the good work
It's a big job installing a new crank!! You did great. Especially a 4 stroke!!
Keep all of the 400s!
you gotta get a shop that would be cool u could fix other people’s and fix up and sell the ones that people sell to you or u find on craigslist
You should be betting on it. It's a brand new motor
I haven't heard any complaints from people using the current Wiseco cranks. There was a problem in the past with quality control. They don't manufacture the cranks themselves and dropped the ball when they should've been consistently checking what they were buying from their vendor. Their reputation took quite a blow and they say they are paying more attention to what they put their name on. Seems to be working out for them so far.
Seems like it's missing a little bit when it windes out
Gas was getting low. I think it was running out.
Joe:we really half to break it in
5 minutes later
Banging off limiter thru gears doing top speed runs and wheelies
Nice bud!! 1 bit of advice though on a fresh rebuild startup , you start it run to temp shut off let cool repeat three times then let we rip
Looks good! How is the tectate going?
Lol, that clip of you throwing the grips in the trash 😆. They looked super cheap like hard plastic.
I only use gripper ceet covers,and odi Rouge lock grips,the best out there. Sucks when the grips come flying off in the middle of a race, or you keep sliding on your seat with stock covers.AND THIS IS NOT BREAKING IT IN PROPER. its missing on top
Goob job man ! Youve come a long way from when i first started watching ( U K here )
You have so many 400s it's hard to keep up with them lol This one should last last a long time Just wish you would have went with a wiseco piston Love the vids bro 🔥👍✌️
Love these 400ex I have a 08 400ex and 05 trx 450r love my 400 never leaves me stuck now the 450 has but love them both but 400 is my go to
Love the vids bro, but i really miss som dirtbike/bike content
great work now ship em out and get more 2 Ts
that's the plan!
Sounds good to me
Keep one of the 400ex's though bud you'll regret it if you don't
Hey joe. I think a great couple videos would be taking one of your 400 and doing some speed and power test. Then swapping on the big bore kit and do the same tests. Nothing else changed .
Lol every time he Records that ringtone go off😂
Its a payment chime from PayPal, let's him know someone bought from his store
Ik
It’s just so funny
Not bad man sounds really good.
What was that sound at 13:15 ....backfiring through the carburetor?
Yah most likely
Slight misfire, my 400ex used to do that when cold and when fully warmed up it would go away
Awesome job bro welldone 👍love the entertainment
Try using the clutch to wheelie
How did the crank hold up? I’m doing a complete breakdown on mine and your videos have been very helpful! I’m still debating on the crank brand though.
Nice job man.
Great rebuild.
Not trying to hate but when you warm up a four stroke bike you have to let it sit there at idle and if it won’t idle you give it a little throttle but keep the throttle steady not up and down. But nice bike tho
Picked up one just the other day.. Nice quad. lots of low end toque
Wel done i thorght u had bit of more than u can chew
You might have already said but when did you sell the 450r
He sold it probably a month ago now
That twist throttle kills that quad for me
Keep up the good work bud 👍🏻
Sounds good man! Sounds like it needs a little carb tuning otherwise looks like a success
Try starting ur wheelies going a bit slower or clutch pop in first and use ur back break you will figure out you can ride them a lot longer especially with those 400s
Very good sound😛😛😛
You should race all of the quads at once and see witch one is the fastest
Need to keep one of them put all the best parts onto one so u have a great 400
what about next z400 project ?
Its a shame your selling it. i would love to see it some more
Awesome vid like always!
The motor dosent sound right, the bearings sound lige they are "spinning"
I like that verified check mark well done man!
It seems like your exhaust connections to the head always leak when you put things back together.
Bad ass yes yes
Sounds like you got it into the rev limiter there a couple times not good
Sounds like it but it was just the engine missing. I don’t think it’s jetted properly for the exhaust and intake upgrade. When you add air you need to add fuel. I hit the rev limiter all the time lol.
He just replaced the crank still has the same piston same cylinder so that's not even a problem
What was the smoking when you first started the bike up in the front
Exhaust paint or possibly spilled oil from the rebuild.... It'll burn off
Awesome video man
Anybody else notice that the swingarm bolt is broken off 😂😂
Bike has 10 minutes ride time and its wheelie practice all of a sudden
Its just a new crank. Not a new piston
Lol well yea
You should do more dirt bike vids
Look good with those black rims on it 👍
No hate but heat cycles and no reassembly lube other than that your getting a lot better at this
Great job!
Looks good sounds good. Where's the 450r?
Is the pre 2005 400 ex any more powerful or just cheaper?
Good job!!
You should take all the red paint off the engine parts and shifter it makes it look bad
Buy a Yamaha Raptor and do a rebuild on that quad, from 700 cc to 1000 cc, just a complete rebuilding with the engine included, that would we thrilled. Or rebuild a Yamaha Banshee from a 350 CC engine to a 500 CC engine, enough possibilities.
Keep up with the hard work 👍
im sorry but stop saying that it blew up it didt if it would of been blown up there should be a hole in the casing or something snapped
Ahhh i like the grips you took off of it more myself personally 🤷♂️ and ya could have recycled or sold them no need to just throw them in the trash dude
BRAAAP.... wait that's a 2 stroke
You got to do a top speed vid on the 3 400’s
Where's the TRX 450?
Get a scrambler 400 2-stroke it's an amazing quad its fast and has 4wd
Boo
Junk!!!! hada 99, it blew up after 5hrs on a fresh built motor, the only cool thing about it is 4x4 2 stroke. There oil injected junk, can't keep up, way!!!!! To heavy. I crashed one at 65mph and it almost killed me,
@@jasonpetrich4141 in my experience I never had any problems I was never easy with it I put it through a lot
@@kendallnewman1122 I did gncc, poker runs and full mudd bog with mine, it was rode hard put away wet!!It was fun in the sand alot mine spit the rings right out the exhaust!! And broke the piston in half
I cant even keep track on these 400ex
How did you fix the exhaust leaks up front
put the 700
put the 700 $ rims on it it would look sweet
should fone hotrod crank last longer
fuel filter need changing ? missing abit on full throttle.
Whoop!
Why not do a giveaway with all your old parts. Instead of throwing it away. Your fans support you by watching, subscribing, and likeing the content. Show some love back man and do a massive giveaway.
You should do a giveaway that would be cool an love the vids
about to rebuild my yfz450 tommorowwwwwwwwwwwwwwwww
Good job...😆👍👍👍👍👍👍👍👍
Did you put top motor mount on? i saw it was off-
Full engine rebuild? No new valves , no piston ?
My Honda has the same little whine from the right side does anyone know what that is.
Be careful with that twist grip throttle. You can get hurt pretty bad if your not careful or use to it.
Can I buy a 400ex from you
Who else fast forwarded it to make sure she didn’t blow ?