Flower time test for resin
HTML-код
- Опубликовано: 14 сен 2020
- ATTENTION: It has been brought to my notice that there is a typo with the measurements. It should read 60ML not 60CL. Sorry for the confusion.
Hi I'm Wendy, a resin artist from the UK and in this video I'm experimenting with the flower effect technique in coaster moulds.
I have made them before but didn't time the process. I thought this video would help me and you at the same time.
I have put all the times on the screen for you to see the different effects and hope this helps you find your own way of making them.
At the time of recording the temperature here was over 30C and therefore in colder weather the resin will need longer to have similar effects.
I hope you enjoy the process. Epoxy resin art can be a very rewarding and also frustrating at times. I hope this video will inspire you to try it yourself.
Comments and questions are always welcome.
Thanks for watching.
Etsy www.etsy.com/uk/shop/Toonpish...
Resin used houseofresin.co.uk/alumilite-...
New Mask www.mysafetygear.uk/product/m...
Diamond cut moulds www.etsy.com/uk/listing/68120...
Music from Epidemic sounds www.epidemicsound.com/
AFFILIATE SHOP LINK BELOW
As an Amazon Associate I earn from qualifying purchases
These link below will not cost you any more than the store price but I will receive a little help for my channel. Thank you
www.amazon.co.uk/shop/toonpis... 
Хобби
100000000%%%%% 20 minutes is the sweet spot ! This helped me massively ! I havnt tried these but seen sooooo many and I will definitely go with 20 mins xxxx Thanks so much girl fab informative and helpful video ! 🙌🙌🙌🙌 xxxx
Just remember it was so hot here at the time. If its cooler it will be a bit longer.😁😁😁👍💗
Thanks so much sweetie 🥰
Those are so pretty and each one is unique. I'm not sure which is my favorite. Probably the 20 minute one. I love watching them develop!
Thank you so much Lisa 😀😀
These days most flowers are done with temperatures I think 🤔 as each resin is so different.
I dont do many flowers at all now 😂😂
There are so many that do 👍😀
Very inspired. I prefer the 20minute coaster too. Lovely! Thankyou
Thanks so much Julie 😀😀👍❤️
Wendy, firstly welcome to RUclips, you are so confident in front of the camera, you are going to go far. Secondly, your coasters are stunning! I learnt a lot from this video and I’m definitely going to colour my edges that way in the future. Your video was a joy to watch. Thank you for sharing your timing experiment and I will give you a shout out if I use that edge technique in one of my videos.
Aww thanks so very much ❣️. You are very kind indeed. It's good to share ideas and techniques. You are great too, you are extremely imaginative and have a lot of great ideas. I look up to you, so this comment has really made my day 💗
20 - 25 mins look the best to me. Thank you for this video. I am binge watching your channel..👍👏😊❤️😜
Thank you so much Barbara 😀😀 enjoy your binge 😂😂 I really appreciate you watching and commenting 👍❤️
20 minutes is perfect 🥰 however I don't mind the 15 minute one either. It's just a completely different look.
Yes Holly I agree 😀😀💜👍
Great tutorial 😊 15 & 20 mins look the best I think, though all 4 look great as a set 👍 I do love this set of molds, you’ve converted me to buying it 😁 x
😀😀😀 thanks so much 😀 have fun creating 👍
I’m partial to the 20 or 25 minute pours. I like that little bit more definition in them instead of being all soft and fluffy.
That’s a fare comment 😀😀 thanks Virginia 😀💜
Amazing the difference 5 minutes makes in the way the resin moves.❤❤❤
Isn’t it 😳😀 💜
Beautiful absolutely beautiful
Thanks Sheena 😀❤️👍
Nice video wendy glad to see your happy face great projects
Thanks very much 🥰
art room looking lovely wendy !
Thanks very much indeed 💗
20 minutes is my favorite
It does depend on the open time of the resin you use using though 😀😀 but thank you 👍❤️
You have wonderful ideas!
Glad you like them! Thank you 😊😀💜
They turned out SO BEAUTIFUL! They remind me of white dandelions. I like the 20 minute one the best, but they are all so pretty!
Thanks so much Trish. You are very kind. 😁👍💗
Thank you so much for this video, it has answered & confirmed my problem. I truly appreciate your details and most of all your thinking out of the box... Love Love Love your work and videos!!!
Glad it helped 😀💜👍
This is amazing ! Love the 20/25 minutes ! And thank you so much for sharing the quantity per Mold this is sooooo helpful ! X
I'm glad you got something out of this. Brilliant thanks
20 minutes is my favourite 😍 ❤
Fantastic 👍🥰
I LOVE IT !!!!!!!!!!!!!!!! THERE SOOOO BEAUTIFUL WENDY , YOU DID A OUTSTANDING JOB WITH THEM . GREAT VIDEO . GREAT JOB. THAT RESIN IS INTENSE FROM WHAT YOUR SAYING . BUT TRULY ESQUISITE AS WELL . HAPPY RESINING TO YOU WENDY . GREAT CHANNEL. !!!!!!!!!!!!!!!!!!!!!!
Thanks again Marguerite 😀😀
You are definitely working your way through them 😀😀😀
Really appreciate it 😀🤗
I like the 20- 25 minutes best! But they ate all beautiful!❤
aww thank you 😀
Beautiful 😍
Thank you Den 😀💜
Fantastic video wendy I got some tips from this video thanks girl !! 👍😊
Aww thanks Clive. I'm so glad it gave you something 🥰 thanks for subbing too honey 😘
Thank you for sharing ❤️💋
I love them 🥰🎉
Great video! I’m knew to resin so I got up but only want to make coasters beachie
We all start somewhere 😀😀 I started by coating acrylic pours 😀😀 hope you enjoy it 👍
Great job Wendy. Love them.
Thanks very much. Glad you like them 😁💗
Thank you. 😊
Welcome!
They are all sooo pretty! Love that glitter, Hemway? Admire you suffering for your art!
Lol 🤣. The glitter was just an ebay one. I tend to buy as cheep as I can because I bye a lot 🤣🤣🤣🤣
Hemway are doing deals and CCC has a code. They are absolutely stunning x
@@chantalcross5737 this is true. I might get some next time I need some 👍💗
They're seriously gorgeous.
Love it! 20 mins was my favourite too! xx
Hehe that's good to know. Glad you liked it too 😍
20 min - than 15 - but love the 20 minutes the best - just found your site & have been trying to watch of you videos.
Thanks for binge watching Joyce 😀😀💜
I’m trying these tomorrow with the same resin. This helped so much! Thank you!!
There are lots of RUclips videos on this subject now so check out others who are by far better than I am at it 👍😂
Have fun and I’m glad it helped 👍❤️
@@Toonpish I’ve watched many. Yours is the best, most informative I’ve seen by far! These timed test videos are so helpful. Don’t sell yourself short. As someone who’s only been researching resin for a few months but has watched hundreds and hundreds of videos, believe me when I tell you that you’re videos are among the best!
That’s so kind of you 😀😀❤️❤️💜
@@Toonpish we all wonder what other people see when they see us. It’s so nice to let them know. Especially when what we see is really good. Lol
Aww thank you 😊💜 you have made my day 💜💜
Really enjoyed the video so informative and Wow you are really honing the presenting skill
Thanks Wayne, I'm getting better. Relaxing more each time. Hope I don't go over the top 😂
@@Toonpish @Toonpish_crafts you will be fine kid be yourself you have a natural ability before the camera. As long as you don't force it you will be fine. There is a certain flat woodworker out there that I have watched since day one whose commentary was so awfully wooden as he tried to read his script it was painful but his content was very good but now a few years on he has learnt how to address the camera and has over 100,000 subscribers, but you have come out straight away with the ability to present.
@@waynebigfootwoodcraft Wayne thank you so much. You are very kind. I am naturally an idiot 😂 and daft as a brush, and laugh all the time, time will tell. But thanks so much for your encouragement. Virtual hugs from me 😁.
Very nice, Wendy! I like the 20 and 25 minute the best. The 15 is okay and the 30 not really well defined enough. Both the 20 and 25 look great and each has it's own specific, yet really cool look.
Billy
Thanks so much Billy 💕. I totally agree 😃. It was hot here at the time of shooting though. Will take longer in colder weather, but experimenting is fun 👍😁
Great video Wendy. I never managed to get mine to look good but I'll try your method now with the 20min xx
Good luck honey, just remember it was very hot here at the time of filming. 😁
Brilliant video Wendy, really enjoyed it. The coasters really turned out fantastic. I preferred the 20 min one but it was really interesting how different they all looked xxx! Can't wait for your next video xxx 💜💜💜
Thanks so much honey. I'm so glad you liked it 👍👍👍💗
@@Toonpish Yes I've learnt so much so thank you xx 💜💜
@@valeriescraftyattic3337 😁😁😁😁😁
@@Toonpish xx 💜💜
I think the 20 min wait is good. Can you make a sunflower yellow petals brown centre.
I’m sure you can Daniela 😀😀❤️
i like the 20 mins best, then the 15, mins, then 30 mins the 25 mins as last.
Well that’s different 😀😀 thank you CLT 😀😀💜👍
I know this video is older, but you did timing. Check out Julie Cutts at Pouring Your Heart Out. Just for fun to see hers. She takes the temperature of the resin to 40c, then does her bloom. Perfect every time. Different resins go off at different times as you know. Timing won't be consistent. Just as a comparison.
Thanks Catherine.
At the time of making this video Julia hadn’t mastered her blooms as she was still in the process of learning herself. You are right about the temperature and I use that method myself when casting large items.
I don’t do many flowers to be honest but I do appreciate your comment. Thank you so much 😊 😀👍❤️
They look very good Wendy and like you say 20-25 mins looks about the best
How much do you sell them for???
Message me on Instagram. Not thought of price just yet. I will work it out. Thanks 👍
Hi beautiful! Where do you get the molds?
These came from Etsy. Kissrose. Sorry I didn't link them. I will add the link in asap😁😁😁
Do you have a link to this resin please? Also how're you getting on with the new resin? CCC seems to love it!
I have the deep pour one ATM. Its just as good as any other, but takes another day to cure. And is a fraction of the price. So how could I not love it 💗😁😁😁😁
I'll link the resin in a minute
I've put the link in now. Sorry about that. 👍😁
Coool. I look forward to seeing a review. How long to cure fully hard e.g. To sell stuff?
Was it the type of resin that was burning??
It was curing up and getting too hot to handle. Not all resins get that hot but they all heat up. It was warm weather too 👍😀
15MINS MONE IS SO MUCH PRETTIER X
Thanks Denise 😀😀❤️👍