I love the Apollo alarms, suits the property very well, amazing work mate! quick questions, Ever thinking of making a demonstation board of the alarms? And are Chubb branded alarms a good beginner brand?
yeah, i used my board to build something else, i dont really have the space to showcase a demo board currently but when i do i will be sure to build one up. chubb devices are usually not actually made by chubb so if you find out what system its compatible with ie Apollo or hochiki or other it should work without any issues.
Is your panel monitored (idk how to spell it) I’m guessing Test Mode doesn’t notify your local fire department when u set it off via test mode I’m guessing it isn’t anyway
It’s not monitored, I plan on integrating it into a system that sends me what’s app messages when faults and alarms occur. There is a serial port on the back of the panel for the printer I will just use the information from that, format it and send it via a what’s app.
What happened with the fire alarm not activating (u used the Apollo call point and it didn’t activate first go) Edit: also when u tried to activate the heat detector it took so long to activate and the smoke alarm in the room didn’t actually go off at first (I heard one in the hallway go off and then the one probably downstairs and then it went off) Edit 2: the caravan smoke alarm sounds so basic lol (the Apollo’s sound more good)
It’s addressable, it has a very slow data rate it takes time for the command signal to tell all the sounders to turn on then synchronise hence you hear the sounders switching on in different parts of the house as it turns on and off, you can hear them sync sometimes as they stutter their tones.
hello test logs , i noticed you put the system into test mode with a emergency test switch? how does that link into the panel? its 10 amp switch correct?
there is a switch monitor in the backbox thats the switch is connected to, i drilled a hole in the front plate and fitted an LED that connects to the remote indicator output of the switch monitor. the switch monitor is set up in non latching to put all zones into test while the switch is on. this is a loop connected device.
@@testlogs9005 Thanks for getting back so fast! while I have you tho , I have bought a emergency light and a emergency light test switch. Wiring it is easy but most of the time when the fire alarms goes of all the emergency lights become active no matter what time it is. I have the same panel as you would you know how it would work? if you do know how it does work do you know how to do it?
Find a call point without the resistor in series, KAC types with the rounded front have this option then just have the call point break the connection between the supply and sounder. This doesn’t work well with detectors you need a little circuit to make that work right.
@@OverloadedSolutions I mean bear minimum. Literally wit up the same way as you would a light switch. Use a 12V battery or power supply if your sounder needs more then just up the voltage within its working range
Good afternoon ,I have a question i have a kentec synco as 8000 fire panel it has a sounder circuit 2 fualt but the resistor works and is instaled and the sounder circuit outputs 27v like all ways but can't fix the fault should i get new one or send or repair
In loop explorer the voice sounder will work under discovery sounder beacon. The tone selection and message selection can be done by following the data sheet that comes with the voice sounder.
@@testlogs9005 I have a big favor to ask if you is there anyway we can contact privately so I can ask a couple questions about my new fire panel because obviously your quit skilled and I’m not if you don’t want to that’s fine it’s your choice but ye massive favor
@@Club_vibes69 look up the RUclips channel AS systems, on the channel banner there is a link to his discord server. there should be a few people on there willing to give you a hand.
@@TDSWar its either or depending on what brand it could be red or it could be green, there could be models that have two led colours to determine state and condition.
@@testlogs9005 I had one at school, when the lunch halls lights went out due to half (probably it was half idk tho) of the school losing power so I got to see the one in the lunch hall in action (it normally has a green light next to it when it is not active but has charge) it’s the ceiling mounted ones
I loved it when you tested the emergency lights especially the one in the shed! Good video mate
Very nice test. Love those emergency lights aswell especially the one in the shed
Amazing test and very Cool fire alarm system as well.
The emergency light looks good
Nice! I’m working with a Apollo board at the mins once if I do get the parts I’ll let ya now.
Test logs! You see what I just found in my schools bin was an Apollo manual call so I grabbed it
Nice 👌
@@testlogs9005 yeah I’m so happy saved 20£!
@@ArchiezAviation ya got lucky :)
What was it doing in there😂
You should get the old open area back! And put it maybe outside?
Connor what happens if you plug the dehumidifier and smoke detector in to an extension cable to together in that socket at 11:37
Finally a fulleon alarm
I love the Apollo alarms, suits the property very well, amazing work mate!
quick questions, Ever thinking of making a demonstation board of the alarms? And are Chubb branded alarms a good beginner brand?
yeah, i used my board to build something else, i dont really have the space to showcase a demo board currently but when i do i will be sure to build one up. chubb devices are usually not actually made by chubb so if you find out what system its compatible with ie Apollo or hochiki or other it should work without any issues.
@@testlogs9005 Okay, thanks bud
@@testlogs9005
👍👍👍👍👍👍👍❤❤❤❤❤❤❤
Very good video !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1😀😀
Is your panel monitored (idk how to spell it)
I’m guessing Test Mode doesn’t notify your local fire department when u set it off via test mode
I’m guessing it isn’t anyway
It’s not monitored, I plan on integrating it into a system that sends me what’s app messages when faults and alarms occur. There is a serial port on the back of the panel for the printer I will just use the information from that, format it and send it via a what’s app.
@@testlogs9005 I thought it wasnt
Hey! This is the same guy who posted the original comment, You alright? Are you going to be making videos any time soon?
Connor when is test 27 coming on?
nice AcCeNt!
Great test!
Everytime We see that shed it gets worse and worse
its soon to be a hole in the ground so follow the progression. :P
❤❤❤
2022/4/25 is rainy day?(雨天)
Brake the glass in the call
Point
there is a video where i do that.
What is the name of the video of you brakeing call point glass
quick question, are you able to disable the voice sounder and just leave it as just the siren
yes
Connor at one stage soon can you show the beacon in the garage when you test the car board monoxide alarm?
it flashes exactly the same as it would with evacuate.
Question do you have fire blankets or extinguishers? I recommend having a dry powder or c02 in your panel cupboard
I have a co2 extinguisher its currently in the upstairs bedroom. The fire blanket is in the kitchen and there is a water and foam one in the garage.
May I ask if u took out of the batteries off the panel, would it pop up with a AC Fault or something?
it would moan there was no batteries, then die if you killed the AC to it.
@@testlogs9005 ok so it would pop up with something like this:
(FAULT) Battery not found
@@TDSWar battery fault
@@testlogs9005 pk
Would it also say something similar to if the batteries were low
LOVE FIRE ALARMS😃
When are you doing
Addressable system
Test 27
When u pressed the fire alarm call point I thought the call point was faulty or the panels battery died
Test mode can be funny if you activate devices then switch it to test mode before resetting the system. I find it doesn’t activate sometimes.
@Code_
Was the CO alarm wirelessly connected to the Module with the Relays for FLT INT And CO I think it is (fault) (co) and (fire)
What happened with the fire alarm not activating (u used the Apollo call point and it didn’t activate first go)
Edit: also when u tried to activate the heat detector it took so long to activate and the smoke alarm in the room didn’t actually go off at first (I heard one in the hallway go off and then the one probably downstairs and then it went off)
Edit 2: the caravan smoke alarm sounds so basic lol (the Apollo’s sound more good)
It’s addressable, it has a very slow data rate it takes time for the command signal to tell all the sounders to turn on then synchronise hence you hear the sounders switching on in different parts of the house as it turns on and off, you can hear them sync sometimes as they stutter their tones.
@@testlogs9005 thanks btw I’m not a fire alarm expert I’m more of a transport person
hello test logs , i noticed you put the system into test mode with a emergency test switch? how does that link into the panel? its 10 amp switch correct?
there is a switch monitor in the backbox thats the switch is connected to, i drilled a hole in the front plate and fitted an LED that connects to the remote indicator output of the switch monitor. the switch monitor is set up in non latching to put all zones into test while the switch is on. this is a loop connected device.
@@testlogs9005 Thanks for getting back so fast! while I have you tho , I have bought a emergency light and a emergency light test switch. Wiring it is easy but most of the time when the fire alarms goes of all the emergency lights become active no matter what time it is. I have the same panel as you would you know how it would work? if you do know how it does work do you know how to do it?
When will you Press the Green call Point?
its been pressed for a good few years now haha. the door release circuit is not working
Did you do a test in the shed?
Do system adresable 28
Why did the whole system go off when u tested the carbon monoxide alarm?
It’s linked to the panel wirelessly.
@@testlogs9005 ok
Put on a roshni fire alarm sounder outside
no.
is there a way to be able to wire up a mcp with a sounder/alarm and reset the sounder/alarm by resseting the mcp? (KAC mcp)
Find a call point without the resistor in series, KAC types with the rounded front have this option then just have the call point break the connection between the supply and sounder. This doesn’t work well with detectors you need a little circuit to make that work right.
@@testlogs9005 thanks
@@testlogs9005 when you say a little circuit what do you mean?
@@OverloadedSolutions I mean bear minimum. Literally wit up the same way as you would a light switch. Use a 12V battery or power supply if your sounder needs more then just up the voltage within its working range
@@testlogs9005 I’ll get me dad to do that but thanks!!!! Got ur self a sub as well👍
Good afternoon ,I have a question i have a kentec synco as 8000 fire panel it has a sounder circuit 2 fualt but the resistor works and is instaled and the sounder circuit outputs 27v like all ways but can't fix the fault should i get new one or send or repair
Go down the fix route first. Swap the resistors you know work and see if it clears the fault on that circuit.
Hi how did you get your sycro to make the voice sounder work my sycro won’t
In loop explorer the voice sounder will work under discovery sounder beacon. The tone selection and message selection can be done by following the data sheet that comes with the voice sounder.
@@testlogs9005 ok but my panel keeps saying Wong device type and I am going to return the sounder
Random question, do you have kids and if so do they sometimes set the alarm off for fun? 😂😂
No I don’t, don’t plan on it anytime soon 🤣.
@@testlogs9005 lol okay
@@testlogs9005 I have a big favor to ask if you is there anyway we can contact privately so I can ask a couple questions about my new fire panel because obviously your quit skilled and I’m not if you don’t want to that’s fine it’s your choice but ye massive favor
@@Club_vibes69 look up the RUclips channel AS systems, on the channel banner there is a link to his discord server. there should be a few people on there willing to give you a hand.
@@testlogs9005 thank you very much I will look into it
What do the lights on the emergency lights mean (red light and green light)
If it’s the green or red led it’s just for showing that the unit has mains power for charging.
@@testlogs9005 I thought red meant it had low power (I know blank (no light) means it has no power
@@TDSWar its either or depending on what brand it could be red or it could be green, there could be models that have two led colours to determine state and condition.
@@testlogs9005 I had one at school, when the lunch halls lights went out due to half (probably it was half idk tho) of the school losing power so I got to see the one in the lunch hall in action (it normally has a green light next to it when it is not active but has charge) it’s the ceiling mounted ones
ok
Hello Test Logs Remember Me
From when ?
@@testlogs9005 when I joined your channel
@@Jackzilla2006 no sorry.
@@testlogs9005 when you starting another fire alarm video
Connor you forgot to put test 25 in the fire alarm test playlist
bro uploadddddddddddddddddddd
No
p̷r̷o̷m̷o̷s̷m̷
American systems are so much better.
I disagree.
I disagree, british ones sound like an alarm and not a buzz.
Yeah same