Nissan versa solenoid valve body resistance TEST ( CVT transmission )
HTML-код
- Опубликовано: 11 сен 2024
- In this video you will be watching how to test the resistance of the solenoid for solenoid valve body for 09 nissan versa .this will help us understand the reason why our cvt transmission fail so before we dig in deeper inside the transmission we might try to test our solenoid
You can find that PDF he is referencing on wittrans. He says the wrong ones. The A and B on the transmission diagram are not left to right. “A” (as in, the one all the way to the left in the video) is the TCC solenoid which goes from 6 to 19 ohms so 12-13 on the multimeter is in spec. It is good. The line pressure control A solenoid is the one to the very right.
Watched your solenoid resistance videos and Mazda 3 TCM video as well. Great job of breaking down what your doing and why. Thanks for sharing detailed and concise info. Keep up the good work.
no problem keep watching my other videos
Be sure to also do a pressure test. Besides checking if resistance is in spec , you can also apply 12v to see and hear them actuate. All mine read and opened/closed just fine; I further tested with a little air pressure, found the bad one that way.
Also, note that the spec sheet he's showing is for tranny RE0F08B; specs are different for RE0F10A, which can be found in the same vehicles and years.
Gracias me ha sido muy útil el video, estoy teniendo problema con el p0746 ,lo cambie pero segun lo que explicas hice el equivocado.
Please do a test on primary and secondary fluid pressure sensor as well, its located on the vb
sure next time is just that this are the most common problem we encounter before
Hello you showed the first as A which is the Torque converter "select" solenoid (I noticed because the top has a lip) 6-19ohms. It stated 12.5 isn't that good then?
The rest are 3-9ohms. I tested the TCC select on mine and read 32ohms which is faulty, thanks
Yes!!!! The solenoid he labeled as "A" is the TCC Select Solenoid which is supposed to read 6-19 Ohms is 12.6 Ohms is right on the money! All of these solenoids read proper resistance! No issues here.
The 12 homms resistance is not the solenoide A, that's the selector solenoide and that's the correct reading ,the other 3 solenoides are 6 homms,
im not gonna argue with u brother just do what you feel is correct..this is specific valve body for nissan thas has a serial number reofoba if im not mistaken has its own solenoid resistance manual so im 1000% sure im correct with it otherwise the manual that they give it to me is fuck up..but again ive been working with this car for a while now and i had a positive outcome for it check my other versa videos about cvt transmission
He is right bud.. those solenoid c and d are line pressure solenoid. A and b are tcc solenoid.. i saw your on WIT website but those on GEARS MAGAZINE is different also.. now which one is true? But thanks to your video helps me a lot to diagnose my 2012 nissan versa.. hopefully you a video on the stepper motor code p1778 and p1777..thanks please need help
Nice information.tnx
Where did you get the oms specifications for your car?
in our shop
D = pressure Solenoid A
C = pressure solenoid B
B = tc clutch solenoid
A= select solenoid
there is nothing wrong with it because 12 is between 6 and 19 oms you name the solenoids backwards.
i know its confusing but make sure to double check your valve body that u working on this type of solenoid valve body is for 08 i think and we had a detailed manual for this in our shop that i use for my reference please check urs this valve body start with a code of reof08a (jf009e)
@@asianmechanicguy6483 do you have a value for JF011Ebec I checking mine
@@romanolorvida I think we do in our shop just need to check it but pulling a repair manual for cvt is expensive bro so I can't just show it into RUclips
Great video, thanks for doing these. A few months ago, my CVT started whining so I followed your directions for cleaning the screen and filter which solved that problem. Now I've got P1778 (stepper motor), P07046 (solenoid A) and P0868 (low pressure) I'm going to check resistance as you are showing in the video. Do you know if these solenoids can be purchased separately? I see the solenoid pack on rockauto but it's $400. Thanks!
yup bro even here there selling it per pack
@@asianmechanicguy6483 thanks, got the valve body out and measured 15 ohms on solenoid A. Guess $400 is better than a new trans. Question is, is it worth it. Someone put ATF in this thing so it may be shot. Seems to drive OK though when it's not acting up. It creeps in drive/reverse once it gets warm. Maybe it's just solenoid A is shot. Thanks for posting the pic of which valve body bolts to remove, that was super helpful.
do you have a link to the solenoid pack you used? the one on rockauto doesn't look right, might be for the standard AT not CVT. Not having any luck finding the solenoid pack anywhere. thanks for the help.
Try cobra transmission but that was 2 years ago that i bought cvt parts
You said it backward the a is the d
Hi everyone
Assian Mechanic I have sentra 2015 , and I change the valve body but still the code P0965 related to solenoid B, I measured the voltaje in every solenoide with the car running and the voltage ois around 5.6 to 6 Volts
Is that correct?
thanks for your support
Hey . I have a problem with my CVT voxy transmission my check light not going away , but my 4wheel drive check light come in first, .
Great video
Where can we get that specimen sheet for other cars?
you can check online jjust google cvt mine came from our shop
Nice video. I’m getting code p0744 and unable to clear it. Does this mean the solenoid is bad? The solenoid works with direct voltage.
check for resistance ..direct voltage to the solenoid is misleading sometimes
hey i have the same issues says. p0744 torque converter clutch internal
@@bytito8714 mostly likely you need a new trans. I ended up replacing the trans from the dealer. Tried installing a new torque converter but the same error was there. These cvt trannys are not the best.
thank-you good vid
Ang husay mo idol!! I subscribed to your channel .
Hi, season greetings, just wondering if I replace the valve do they have to be programmed please. Many thanks
No need
Many thanks
Hi , I have a 2008 Nissan Versa hatchback 1.8 L. I want to know 2008 to 2009 valve body solenoid are the same size of solenoid and 2010 the size of solenoid is different or the same. Thank you.
From my experience 08 and 09 has different valve body
Yes!!!! This transmission is the exact same as my wife's 09 Nissan Cube!
I have a failure in my A solenoid and can not find anything online about which solenoid is which and I cant find a valve body that isn't 300$ with over a month shipping. I'm thinking about disassembly and cleaning. Do you think those solenoids are cleanable as long as they still function?
nope if its bad you cannot fix it anymore.. try to go to junkyard
Rhaswin's Garage can you buy only the solenoid that have the problem and replace it on the go for the car to work? In your case the solenoid A
@@AnythingEverythingGh here in vancouver they dont sell solenoid for cvt and i dont know why u can try junkyard or try online cobra transmission thats where we bought parts for cvt
Hey I'm having issues with a 08 Sentra code p0841 solenoid A I can't find the ohms resistance for it I know I check it and it read 35.4 and I buy a set and this one read 29.2 the other 3 solenoid read between 6.0 to 6.7 I just need for solenoid A? Thank u
Sorry bro this kind of repair needs specifications which u need to take it from repair apps or dealership
Where do you get your solenoids? I'm working on a recall for a kid that didn't get it handled by Nissan within a certain mileage.
i get it from junkyard
@@asianmechanicguy6483 Thank you. That's what my Mom told me. You are the man, Pinoy style.
Hi , I have a 2010 Cube , got the p0868 code and the car can’t go once it stops, do you have any suggestions? Thanks
transmssion issue is a complicated job but if you car comptible to bring down ur tranny pan then i suggest u to clean ur transmission filter first then put fresh transmission and u start from there if still worth to fix
Any information on the selenoid nissan tiida 2006 model?
sorry none
I have the same but for 07 murano
The valve 9n Nissan versa 2009 it's same on Nissan cube 2009..I have problem with mi Nissan cube but I cannot found parts only for Nissan versa
Not sure there's is a code or numbers start with a REO just search it
excellent video where could I buy solenoid A for my nissan versa 2009?
cobra transmission site
@@asianmechanicguy6483 I'm a little confused with the reference number, could I locate it? thank you very much for your attention
Almost sounds like solenoid A and D are mixed up?
this is procedure test i had a repair manual as my reference and this is resistance check how do u mixed it up
@@asianmechanicguy6483 I was thinking someone else put them in the wrong order. A is in specs for D and D is in specs for A. That was just my first thought when you read out the resistances.
Great video! Do you have anything for a nissan versa 2012 i have a code P0965. Thanks in advance
sorry i dont have yet but in the near future ill post videos of it
Is there any other electrical parts in the transmission
this is the majority of the wire for cvt transmission of nissan versa other part are all mechanical..what wire are you looking for anyway
Good day kabayan meron akong p0746 elgrand car stall or sometimes transmission engage harshly and engine stall
anong atin bro
Napalitan na ng cvt oil pero ganon pa rin problema code p0746
@@donpedrochannel2529 diko alam ang allowed resistance ng mga solenoid valve ng car na tinutukoy mo pero dito sa versa mayrun taung sinusundan na resitance check so u need to have a repair manual or repair apps para mapin point mo talaga ung sira nya ..pero base sa experience ko kung my tunog or grinding sound na transmission mo its too late rebuilt na ang need nya
sir saan ka kumuka ng manual details mo para sa mga solenoid? thanks!
sa shop namin bro
Where can I find those specifications for my 2012 versa sv?
mostly dealership
hello sir... parang wala pa ata cvt transmission sa pinas. how can i identify if the transmission is already a cvt? by just looking at it. what's the difference between cvt transmission and the automatic transmission? i mean, yung itsura nya sir. sa pang labas. paano ko agad malalaman na ito ay cvt na. salamat po sir.
Mostly my nakasulat na cvt fluid only or ns 2 sa my dipstick.ung nissan cvt gamit nila.. ung 2018 toyota corolla cvt narin sya. Ang cvt transmission mas efficient sya sa gas ung pagchange ng gear is very smooth dmo mararamdaman ung pagchange gear nya at very quiet din at business wise madaling gawin ng mga manufacturers kc simple lang ang parts nya. Sa pinas not sure kung my cvt na din nagtatanung din ako sa mga pinoy automotive youtuber pero d sila nagrereply at matagal narin d ako nakauwi sa atin
ok sir. salamat... pero iba po pala ang fluid na ginagamit sa cvt. hindi po puede ATF ang gamitin? kapag walang cvt fluid.
oo bro pag cvt transmission cvt fluid only ang gagamitin mo kc ung variator very sensitive sa oil yan pag iba ung oil na nilagay natin magkakaroon sya ng early teardown or lamat dbale sa mga susunod na videos ko unti unti kung bubuksan tong cvt transmission na to at explain ko sa pinakasimpleng salita para madaling maintindihan..
ok po sir. salamat. hopefully hindi magtagal maka overhaul na rin ako ng cvt transmission.
@@edwinescobal9085 oo naman bro kayang kaya mo yan napakasimple lang ang cvt transmission compare sa conventional transmission basta pag aralan mo ang bawat function ng parts ng transmission it wil take time and experience para maintindihan natin how automatic transmission works pero worhted naman .It took me years and years para maging comportable na pagbukas ng any transmission just patience and put extra effort sa pag aaral
ser may clutch din ba kapag cvt transmission
Yup my clutch lining din sya at susunod na medyo ko check natin kung manipis na ung clutch lining nya
Mekanikong Pinoy Rhaswin's Garage cge bro antay ko next video mo tnx and god bless
brother by any chance you have the resistance spec for 2003 infiniti g35 bosch transmission re5ro5a tnx tol mabuhay 👍
Sorry bro dont have it
@@asianmechanicguy6483 tnx brother 👍
Nice bro, e try mo linisin bka stuck up lang
Mataas ang resistance ng primary solenoid so sya ung nagcause ng internal damage ng cvt transmission
sa mga ganitong klaseng solenoid pag nasira na wala na palitan na agad..solenoid ng transmission eto bro at di sya katulad ng external solenoid na pwede nating linisan at gagana ulit katulad ng purge solenoid egr solenoid at ibang pang external solenoid ng car
Mekanikong Pinoy Rhaswin's Garage kasi myroon binigay n sasakyan skin,trans ung problima,2 lang ung valve ung isa stuck up,mataas ung resistance, medyo mahal ung valve,so ginawa ko nilinis ko,wd40 at compressed air,so gumana,flush out ko ung trans 2x,e ngaun nka 40thou miles n,la ng problima,,ung cause is metal residue due to hindi pa napalitan ng oil
Ung purge valve sa pg kaka alam ko nasa fuel evap system,d ako ng rerepair nyan kasi under 12v yan,at my resistor yan sa loob,ung egr nman naka kunik yan sa exhaust manifold,parating mainit yan myroon diaphragm kadalasan stuck up ,
At lastly,ung valve n yan,dito hindi makabibili ng isa lang,it comes in set,5 valves at my updated n na valve body dahil my recall yan,ung price palang ng valve solenoid assy is almost 500,e best way palit nlang ng transmission bro
Is this the process I’d need to follow for the P0845?
yup but make sure ur valve body had thesame serial no Reofoa1 or Reofob cuz they have diferrent resistance
All I remember in my casting of valve body it said “FYO#3”.
Do I Change solenoid or pressure sensor?
Also. Would you know where I could get these parts? Hawaii is a hard place to get things, don’t think the local dealership carries these according to their website. And where could I find that spec sheet for the resistance? Having a hard time finding it online. I to have the 2009 Nissan Versa 1.8
Sorry so many questions! I am flustered! Side note: P0725 was also thrown. Engine speed. Could they be correlated?
Can you help me please I have this code p0846 my can nissan sentra ?
you need to check a lot of things for that code like thhe solenoid ..wiring connection ur oil filter but start removing the tranny pan clean ur filter check the resistance of ur solenoid
@@asianmechanicguy6483 thank you dear my car had water flood and some water inside cvt I Discharged the cvt fluid but the problem still bad speed and code p0846 , what is your advise replace the valve body or all cvt
bro,i have 2011 versa code p0746 p0868,look like same problem with you
good you got those codes now open the tranny pan check hows your oil if there no metal fragment in the pan just clean the filter both of them but if there's a fine fragments on the pan ur tranny needs rebuilt
I have seleNOID A stuck off conde on my murano I did clean my oil in the procces did see some fine barely visible metal fragments on my pan but nothing major the car run fine just when accelerating is lazy sometimes so I just ordered the valve body to not deal with selenoid situation my guys is coming Monday to programm it you think I would still need a new tranny or would this fix my problem.
yun papalitan mo lng dyan yung solenoid a
Yup papalitan ung solenoid at expensive ang solenoid na to
eto ang makabagong transmission ngaun cvt transmission magandang pag aralan eto kc in the future eto na ang majority na gamit nating transmission actually ung mga new model ng toyota corolla subaru dodge nissan honda halos cvt transmission na ang gamit ..at eto ang mga pinag aaralan ng mga new automotive student ngaun na mga katropa ko din dito sa vancouver
Mekanikong Pinoy Rhaswin's Garage makabagong modelo pala yan kaya pala hndi pamilyar sa akin ang pyesa n yan slmat sa pag bigay mo ng kaalam sa mga bagong modelo
Ang Mekaniko mgkano ang solenoid n yan i convert mo s peso
Paps saan ka located
Vancouver bro
@@asianmechanicguy6483 sayang ipapacheck ko sana car ko sato cvt transmission
@@zeffell14 ano ba issue ng car mo
Sir pwede ko b kayo i add sa fb? Delay ko kc minsan acceleration nya
@@zeffell14 sure bro search mo Rhaswin Miguel Uno
Bjr bjr
I just changed my valve body on a 2012 nissan altima p0744 code. Left the Allen wrench when installing to hold stepper motor lever, still have the code wondering if i burned the solenoid? I removed the Allen wrench by the way. Car runs well but can't smog it. Changed oil and filter installed a oil cooler. Please help!!😬
when you open the pan and you didnt find any metal fragment theres a big chance you can save your transmission try to take off the solenoid valve body again clean it piece by piece