$20 AutoZone Window Tinting Using a Gila Installation Kit
HTML-код
- Опубликовано: 20 авг 2024
- AutoZone Tint 9 Months Later - • $10 AutoZone Tint 9 Mo...
List of my recommended tint tools! - bit.ly/2WvWa4K
Tool Apron tintdepot.com/...
Shank tintdepot.com/...
Felt Card tintdepot.com/...
Heat Gun tintdepot.com/...
Spray Tank tintdepot.com/...
Spray Bottle tintdepot.com/...
Scrub Paddle tintdepot.com/...
Scrub Pad tintdepot.com/...
Red Dot Knife tintdepot.com/...
NT Blades tintdepot.com/...
Conqueror tintdepot.com/...
Bulldozer tintdepot.com/...
Flat out Yellow tintdepot.com/...
Hybrid tintdepot.com/...
Fusion Handle tintdepot.com/...
Side swipe tintdepot.com/...
Blue Max tintdepot.com/...
Green tail fin tintdepot.com/...
Tri edge x yellow tintdepot.com/...
Tri edge orange tintdepot.com/...
Tri edge pink tintdepot.com/...
Ez reach tintdepot.com/...
Mac tac tintdepot.com/...
Gray lidco tintdepot.com/...
Gator blade tintdepot.com/...
Camera Gear
Canon Camera: amzn.to/2Ar2ZI7
Sigma Lens: amzn.to/2AqFFu0
Sennheiser Mic: amzn.to/2CD8Te7
Camera Jib: amzn.to/2CCi0fc
Camera Bag: amzn.to/2CrvmYe
AutoZone Tint 9 Months Later! - ruclips.net/video/J8-h3C-Zcz0/видео.html
This video mentions that you will leave an Amazon link to a film that's good to use as practice. What film is that?
TintStuff Thank you, Seth! 🙏
Hi! What percent 0% was this tint??
I am a 32 year old mom and applied 35% gila tint to my windows perfect with no experience using this video after 2 fails. The solution was running low so i added some water and it still worked like a charm. Thank you so much!
👏
Single mom? 😂
Bought this film in a pinch and installed with that same kit. 2 years later still looks awesome. Watched this dudes tutorials like 20 times and had to mix my own solution. Also had a second squeegee lying around and used a credit card to hold the seal. Done and done! Two front windows tinted for $30.
awesome man. thanks for your comment it gives good reassurance, especially that mention that 2 years later it still looks great
How do you make your own solution?
@@lindahaddon
Fill a spray bottle with some water and add a pinch of some Johnson Baby Shampoo (yellow bottle). Since that was sold out, i used a generic brand and squeezed like a teaspoon in a 64oz spray bottle. Done!
@@Unlmtdprogress I've had this tint on my one car for 3 years and it's been fine
I really appreciate the time this guy takes to walk you through the logistics and explain the little tricks professionals use. Most tint videos make it look so easy, this guy explains why it looks easy even though it is quite possibly the most frustrating DIY project on earth. Keep up the good work.
yea i was thinking of doing this myself but it seems like it requires a little more finesse than im capable of lol.
do you even know what the word logistics means?
@@stevegamer4474 um yeah I do, that's why I was able to properly use it in a sentence... A year ago.
@@bryangedbaw5816 what does it mean?
@@stevegamer4474 are you really asking me why I find it helpful that he lays out the means, methods, and planning involved in achieving a desired outcome? I hope you eventually make it out of your parents basement.
Ive tinted Windows useing ebay tint a credit card a sprayer bottle filed with water lol 10 yrs later still holding
Ariel Zambada Which brand that you use on eBay
@@mog9501 it was advertised as the 3m kind bro limo tint
I use a sprayer I bought from home Depot
Wow kool
Matt Callis He used a hair dryer
i can already picture the stress i would be going through trying to install these
Latrell Davis haha I just attempted to do mine myself and I think I shaved a few years off my life and have some premature graying hair now
My son and I just did his Honda and if I had a nickel for every cuss word we said! The last window we did was almost perfect but don’t ask me about the other windows lol.
@@rileyspowersports6967 🤣
Honestly, the side windows look simple, I’m picturing the back window with crap access being the pita
It’s not that hard actually
Step 1 get the 36" × 6' Gila tint. The 24 " won't cover most rear or front windshield.
Step 2 get a 18" extended squeegy to reach behind the rear dash center brake light.
Step 3. If outside use Frog Tape so the wind doesn't screw you up while trace cutting.
Leave the backing on and transfer the tint inside. Frog Tape again inside the windshield. Remove half the backing and wet the windshield, tint sticky side and slide between the windshield and trim.
Well this video encouraged me to try to do the window tint on my mud truck. Good thing is it's not a very nice truck and I don't drive it very often. I bought the film from Walmart and our local Walmart sells the install kit too. So I went to do the driver side and I messed up I didn't roll the window down to cut listen turn made a huge gap at the bottom but overall the tent laid really well and no air bubbles so I was okay with that. Knowing what I learned on the driver side I tried to implement that into the passenger side. I made sure everything was extremely clean and I trimmed everything extremely well. I even pulled the door panel off for good measure to make sure that I could get the tent to lay flat on the bottom. I learned something very valuable today. Do not do window tint when there's just a very small amount of wind. I started peeling the backing off getting ready to transition it to the inside when a little bit of wind folded my tent over on itself and I tried to separate it which then made it worse and then I tried to pull it apart even more and it made it even worse so then I took it inside and got it laid out straight and I put it on the window and it fits it's the right size but it's crinkled all to hell and there's lines and air pockets everywhere. The moral of the story is you live and you learn and next time I'll know what not to do. Thanks for this video it was extremely helpful
Thnx 4 the laugh man totally rlate
bravo to you. there's another guy who tints windows professionally and his "beginner" video, he made it seem about twice as hard as your video.. so kudos to you
I’m an AutoZoner so I bought this kit to try to tint my fishbowl of a car with my 20% off :) also pro tip with snap blades: use a pair of needlenose when you break off the edge. Perfectly along the etching every time
I’ve been doing it like this for years 💯
Definitely takes time and practice to be able to just use that kit and still come out with a professional look.
I gave it a try on my lexus and it came out really good, I did 5% and it’s awesome!
I request that you tint a 95 Chevy caprice back window and show your first attempt and I’ll believe your a tint master. Game on. Who else wants to see him do it? Give likes!!!!
I'm sure hes tinted windows a lot more challenging. Look at some of his other vids.
I had a 91..gave the tint guy hell..lmao🤣
I’m down
A 95 caprice is very easy...i had done a couple...i said a 1998 vw beetle back window!...
My son and I just did his 2004 Honda Civic and it was a pain in the ass. Would be nice if in these type videos they would explain the importance of handling the tint with extreme caution when transferring from one side to the other. The slightest slip and the film will stick to each other and create crimps when you pull it apart. I highly recommend 2 people handle the film if you don’t know the trick to properly handling and transferring it alone.
Garbage product that needs a professional to make it look good.
I appreciate the fact that you used only what was supplied, and kept your cool,good job man!
It's cool, but the tint guy I go to charges $30 a window with lifetime warranty. I'm all about doing things myself, but sometimes we need to own our limitations.
Ernie Keto Fit who’s your guy man gotta let me know
I want to know that guy too
lemme know
To everyone in this thread: literally just go on Craigslist and lookup auto window tint and you’ll probably find a ‘ ‘guy’, if that doesn’t work then go on yelp and call around, a lot of film manufacturers have a lifetime or like 10 year warranty so if they’re an authorized installer just keep the receipt. Ive never paid more than $120 for a full 5 window tint job
@@ripem1417 You've paid for a shitty tint
Nice job! For most people it’s a fun experiment, but window tint is a special talent. It takes a lot of experience to get it done how you did.
I’m going to tint my windows myself. I bought autozone window tint for $12.99 each roll and I bought 3 for my coupe. So even if I don’t cut it properly. I’m still going to leave it the way it looks. Either way the tint is still going to do it’s job. I might not be a professional but the tint will be applied and I will save me some money plus I’ll gain some knowledge. Cheers
7:52 “what kinda shit is on the glass”😂😂😂 had me dead
Jose Delgado 😂😂😂
I worked for a chain parts store years ago. Bought the kit and tint to for my truck.
Used ammonia free glass cleaner to clean the glass. When I got in a pinch for the application. I used it again. Turned out well.
Removed it about a week later. Wasn’t liking the bluish grey color.
Looked great from the outside though.
🔥 Recommended Film and Tool List 🔥 bit.ly/2WvWa4K
this was very helpful I just got the same kit and tint on amazon today im gonna try and do it myself this weekend
So, how do you know which side is which to know you're not cutting the wrong direction? as in cutting it and realizing its gonna have to go on the other door? or does it matter?
I've actually gotten very good results with that tint. Did a mustang and it's still holding 2 years later
I ironically tinted my windows on my car with the 5% tint and the application kit , but it was 93 degrees outside. It turned out horrible, but I will retry in a cool non breeze area.
But your application turned out great.
Did you try it again
What’s wrong if it’s hot outside?
This dude, I can’t begin to thank you brother I bought this tint thinking it was easy bou was I wrong, this video helped me so much took a lot of patience but I finally got one whole rear window done🤣 ready to do the rest tomorrow
Used this on my car about 4 years ago on my first attempt on tinting, trying to get the fingers off was a nightmare even with my heat gun.
I ended up just doing my rear corner windows only since my front windows have a big curve to them and i ended up ripping the film while trying to install it. after all these years the tint on the corner windows is still holding up in their
When he said “what kinda....Shit is on the glass.”😂☠️
I learned how to tint on my car and it came out real shitty but since then used this tint for about 8 vehicles and all came out badass with only that kit and another like 4$ kit they also sell, came out good af no creases no dirt under no nothing , I dont see why theirs so much hate, yes it is cheap ass tint but works just ass fine
Interesting with your Eastman reference as the manufacturer. I live and work just down the street from the Eastman Chemical Company in Kingsport TN. Eastman owns alot of manufacturing centers all over the globe but the one in my town is the largest. They make over a hundred different products and is our towns largest employer ( of course lol). The entire complex is MASSIVE! It even has its own powerplant, built just for it's needs.
I used this for my first tint, it went OK. Front windows creased but the color was fine for 7 years even if it was blue on the inside. Their rear window strips were thicker and so much easier to do, and the color was good. I'm going to try tinting my new car with lexen. Same price as Gila but way better film.
How do you know lexen is better film? Would it last longer? easier to apply? or has better color tint?
I've been unable to choose between which film would be better to get to for my windows!! This Gila looks a little too blue
@@lawyerreactsnotthemoon85 It's thicker, easier to work with, doesn't tear or crease easily, has a charcoal color inside and out, and about the same visual acuity.
I’ve used this kit and tint on 3 vehicles I’ve owned. This last time I shrunk the door windows I was doing and it didn’t turn out terrible but the film is garbage and almost impossible to get a pristine completed job. I call it a “10 footer” lol...it’s good from far, but far from good 😂
You look like the cop from superbad
Holy shit he does lmfao😂🤣😂🤣
why did i watch this for entertainment
I appreciate it 😁
@@DetroitTintStudio Ive seen a past video on a sub install or something. You mentioned you tinted for a living. Glad you made a vid showing your trade. You are well spoken and easy on the ears. Your vids dont annoy me like alot of other diy persons videos. Awesome vid!
i bought the 5% “Premium” static cling roll from autozone and it looked way too blue even more than the one you installed, and it felt like elastic rubber. gave me a hard time so i threw it away. great work tho i enjoy watching.
The static cling is different from regular automotive tint but I'm surprised all their films are so blue.
I bought some as well. The directions suck and their videos comment sections are turned off. I went looking for tips and left aggravated.
I hate the thought of a shop removing my door panels and pop things off, then I get squeaking and other sounds I never had before. Plus many of them also cut the film on the window and splice your rubbers around the edges. I just need to find the best film and I'll do my own.
I tinted windows with a paper towel wrapped around my fake ID and a spray bottle full of tap water and a few drops of baby shampoo. I remember some film that had what looked like hologram sparkle in it. This was back in the 80's.
This comment right here officer
so new york passed a law recently where now during your annual car inspection they check all windows for tint. cars can only legally have the rear windshield tinted (any %), and 6" eyebrow on front windshield (any %). front & rear side windows have to allow 70% light to pass (which basically means no tint allowed). this law passed & went into effect january 2017. i had to remove the 35% tint i had on my car which bummed me out. while i love having tint for lower temps in summer & privacy, i (and i'm sure many others) are not going to bother with removing & reapplying tint every year to pass inspection (the glue left behind by the tint is the real hassle!). found a company like Gila that sells static cling auto tint called greenfilmusa. purchased 20% and installed on all sides, rear & eyebrow. it's unbelievable how well it looks and it has held up the past few months great! would be cool if you did a review on that product. here are a few pictures of without the static cling tint & with: imgur.com/a/mslpcvb
edit - the beauty of static cling tint if it wasn't obvious to someone reading this, is that you can easily remove it, pass inspection with your now see-through windows, and reapply it when you get home in minutes.
I'd still tint mine 5% fuk the laws lol
Man thank you so much for this vid I watched it like 8 times and I can’t believe my results I’ve had 4 shops turn me down because the year of my car. That made me upset so I’ve just saved so much money just by doing it myself with you there with me all along. But I took my windows out the car to do the work inside luckily my rear window was already tinted this was my first time and I feel really good about it I did 20% hopefully I don’t get a ticket but the money I saved will pay for the fine and after that I’ll try 35% because I think that is what is technically the Legal darkest idk I don’t drive this car much at night and during the day you Can see inside from the outside so I think I’ll be ok I just want to say thanks a lot for this Very informative video
I never use this stuff but I really enjoy watching the videos of it for some reason lol thank you again for your time.
Thanks I appreciate it!
U worked ur ass off with it actually but u remained really calm which was cool. Good job. It literally just came together rt at the end. Good video.
Tinting windows is just like a lot of fun some people just love to do it I mean even if you have to scrape it off once and do it again
I used this film on a car I sold recently. I originally had lumar film and previous owner for some reason did a double film on the drivers side window. I matched it close with this film because I wanted it to look nice for the next owner. I didn’t want to pay for llumarfilm when the car was basically sold, so I used this, and with my tools I had at the house from tinting years ago, I made it look about an 8/10 as far as install went. The tint is most def thin, and color was not as dark smoke but more blue like you said. But I made it work.
I think for people wanting to learn to tint, this is a cheap way to start and if you can do a clean install with this thin film that likes to roll on you, you will feel good about using a high quality film. I’m almost positive this will start to fade in a short amount of time too. It cost me +/- 10$ fo do my window vs 75 which was the cheapest I could find someone to do it.
ok, so I'm seeing your video on this 10 dollar Auto Zone tint 9 months later, so I'll watch it!
just tinted mine with this although I used soapy water to apply
Nice! That's what I would recommend and it's good to know Gila also recommends it on the box so they don't just try to stick you with their application solution.
Hows it holding up?
@@slicknslidin4124 That's what I wana know RN
This should be the instruction video from Gila, that was simple and made sense. The video they have up now is garbage and they know it, comments are turned off and it isn't crystal clear like this one is. Thank you
This is the exact window tint kit I used to put tint on my car over the weekend. I used the multi layer gila tint though. A little higher quality.
Love the detail to perfection great job
Just got my whip tinted 5% in the back and 15% in the front.looks like a different car
Dwight Shrute the Trans Am or Challenger?
thats what im talkin about
This video basically insured me that i need to take my car in to a professional. 😅
So whats the difference on not heating the tint and heating the tint?
I bought this tint it is not bad for beginners who want to tint there windows or tint your beater car for cheap and good quality.
its a minor thing but the best way to break those break-away blades is to find a hard ground and snap it on the ground. at least thats what my dad's taught me after 30+ years as a carpenter lol. made everything much easier when we were hanging drywall at my aunts last summer
Gotta love a guy who swears while makin a youtube video. I just wonder how to tint my fog lights which are round.
Use vinyl film and a heat gun. Takes like 5 minutes.
@@kellypg ok. Thanks
The results were pretty good I’m not even gonna lie
Thank you so much for the reply about my Subaru. I forgot to mention that I love your channel.
Thank you for making me throw away 50$ makin me think I could tint my self really appreciate that
I'm thinking unroll a section and reroll inside out, like a new rug so it lays flat.
The spray is an adhesive it should stay on . I hope. I'm going to try. It's 60 and humid out no sun.
I’ve used Gila tint many times in the past,till I started using ceramic film,,but that kit sucks as bad as it did years ago,great job making it work..
i have used this kit before and have had wrinkles get in the tint to were i redo it. so for me personally i remove the glass from the door completely and take the film 1/8 to the edge of the glass that way you don't get daylight if its to short with the rubber seal. I wouldn't recommend this(i have auto body and paint experience so i know how to disassemble the door) but for my personal and family member cars i don't mind doing it takes over 5hrs though and comes out perfect.
I'm 1996 Grand national winner Sacramento auto-rama winner Lowrider show best bomb winner I'm 68 years old I've used the tint on my element side windows it came out great looks great color matches Gray and it was easy good job
After watching the Gila installation video, I think watching you gave a few extra things to look out for. Thanks
It will work. Just like how hood scoops from autozone works on chevy cavalier.
I had no idea Eastman made film for llumar and suntek, and I live right next to their headquarters. The plant here makes a lot of different raw plastics and fibers so it never crossed my mind. Interesting video!
Totally agree with that first sticker…what a pain
I like your chanel and your videos. I'm going to atempt to tint my windows on my own, i believe i can do it thanks your tips. Thanks bro :) Great content
Well, how did it come out??
How was it?
Just found out you do this for a living I understand now why your so critical of a cheaper diy type
I tinted my car in this. Came out decent. I was wondering where would I be able to get a good quality film? As close as professional grade as possible.. thx for the help in advance
Amazon has some. Ceramic tint is the best
Nice vid thanks! Going to try it for my first time. I ordered pre cut pieces off of ebay lol
Excellent video, gonna watch this as I try to apply my auto zone tint film. Thanks
I couldn’t do that with all the tools in the world. Yet he did it with a 20$ kit
I’d use plastic covering to prevent the water from getting into the door. This can cause issues with the electronics.
This was really great! Using just the basic kits!
I like the black magic tint film video you did were you used the bondo plastic spreader to squeegee the soapy water out from the film. I did the same application as you did but i did the tint install on my bedroom windows a little different than on a car. The only thing it doesn't have are window seals like on the car where you can cut the film slightly larger and tuck it under the window seal to cover any exposing gaps. Doing my room windows i measure the glass and get exact measurements to cut on the film but slightly larger about 1/16'" extra on all sides of the film than install it on the glass and whatever access of film left i cut it as close to the edge of the glass and frame without showing any gaps. i purchased the NT Pro Cutter stainless blade off of ebay to do the job i had one of those plastic tint blades but i wanted to try the stainless blade that you recommended from the black magic tint video. I did one set of windows in 2.5% and the other set in 5%.
You make it look so easy lol
Awesome thank you for all the information
why does no one protect the inside of the doors in all the tint videos ive seen?
Pulled an ole Mike Sanchez with usimg the conquestidor when rounding them edges haha. I use it too
It actually tells you to install the film on the outside of the glass on the directions on the box for the tint 😂
who is doing the right stuff now? this guy or the box?
Oooh man, you see yourselfs using this all day every day, no thank you, how we love our heatgun / torch, pro tools and film.
Still a nice job, only I dont like the color of the film.
You’re the Brad Hall of window tinting 💯🐐
Hey man I watched this video 6 times by now... I want me 0.000006 cents!
Some eBay tint would be cool to see! bought some from there recently just haven’t installed! Would be cool to see your opinions on it
It's definitely on my list! Wanna shoot me a link to the one you ordered? Not sure which route to go yet.
showing it on a side window plus a rear window would be awesome too!
You completely ignored what he said
A little late but i bought ebay precut tint and it’s held up well after 3 months. Not 100% perfect cuts and the bubbles were very hard to get all of them out. Not sure if it’s cause i’m new or because it’s not quality. But all in all it’s worth it
Tint my windows I will pay for all the materials 😞 you always make it seem easy
it is easy lol you just have to practice. Its more difficult to learn the film's limits than actually installing it
You have a shop that put tints?
@@kevincuevas3252 nope, I should though. TintStuff has a lot of great tutorial videos that makes it very easy to understand and do. I learned a lot from this guy.
Honestly it’s the snobby I only use premium product approach used here that makes your review worthless
To sum it up as an actual normal person who never has tinted windows yes this product works sure it is cheap but for the diy person watching this video absolutely go for it worst comes to worse you gave it a shot for under 20$
Side note have had it on my car through rugged climate (sun) (rain) (snow) for 5 years not a noticeable difference from my other car which I paid 200+ dollars for to be tinted with ceramic tint
It works and like everything else in this world it’s all about how you use it and to what degree it was made for
Peace
The static cling doesnt have the liner does it? I was trying on a throw away piece for a while and finally figured out it didn't have one. They should definitely hire you for their videos. Terrible 3 step directions. Lol
Ok so really did ANYONE here actually find this activity at all easy? Lol I'm about to go take a drive to go pick one of these up right now myself and DIY this on my car in the shade at Walmart LOL!!
🚘😎👍🏾
I had the same problem with the film and when I read the instructions was because the film I bought was for tinted windows and also for house windows lol and to the looks of it you got the same film instead you should get the film that doesn't come in a box
You’re really making me want to do a self installation.. But i know I’ll fudge this up
You can do no harm man. Just try it. Master the cheap low quality junk, then move up. Tinting is very rewarding, but very hard at times.
I say you should go for it, you will always learn something for at least trying. I scrapped so much film learning how to tint.
@@DetroitTintStudio I watch this but yet cant even drive yet and dont even got a car
weeyyyy da minit... did u say 20 bucks only? I spent 600 bucks on the materials u suggested and I have not started doing this crap, yet? holly cow!!!
Bought my stuff today. I got tired of crouching to smoke. Hiding
I’d like to see you review motoshield pronano ceramic. The numbers they post look great and it seems affordable I believe 20x100 roll on Amazon is around 200-350 which is pretty cheap for a ceramic film. Thanks!! Great stuff
I just need to cover the sun little on top window shield no need the whole thing
Can you make a solution at home with water and dish soap? What would be the ratio of water to soap?
What is the ratio of soap to water?
It great for if your wanting to tint a work truck that takes a beating
very useful😃😃😃…i tinted my windows n there were some bubles around😂🤦🏼♀️ next time ill be getting the tool kit kuz i was using my id to take the bubbles out lol..but with that papers it was seems that was abut to break lol
That squeegee looks pretty useful.
You make this look easy.
Spend 5 more bucks go to Menards or ace hardware and get a window razor/scraper for cleaning 👍😀
Nice video. I'd like to see how your able to heat shrink it, ie back window on some thing curvy like a crown vic. For it being a thin film I have never had any luck shrinking Gila curvy glass. Also if your using Gila you shoulda went old school with a driver's license as a squeegee and a square razor blade ;)
My toxic trait is I believe I can do this.
if a skilled worker shows you to brake a blade with your finger you immediately yell STOP. cross with a circle wrong . but great video i installed 2 windows myself using this thanks.