I have this on my S23 Ultra with Spigen Tought Armor case and UAG Monarch case and both fit perfectly. Especialy with Spigen T.A. case, lenses are protectet realy excelent. With UAG protection is little less, but still very well.
Hey mate, do the protectors actually stick on the camera lens itself is the lens frame, my worry is that if I buy these and need to remove them the actual lens doesn't get damaged with glue - thanks
Hello, how does autofocus work, especially the transition between lit and dark areas with these protectors installed? I read a review somewhere it ruins autofocus.
Hi there, thanks for watching!! I haven't personally noticed any difference in autofocus before vs after putting the protectors on, though to be fair I put the protectors on the phone a few days after buying the phone so maybe I didn't have time to get used to the "normal" autofocus? I still have the protectors on and haven't had any issues with the camera or with the focus. That's just my experience though of course :)
@@Zaknaberrnon That was a quick reply! Thank you for sharing your experience and the video. I'll go ahead and subscribe; best success to your channel! :)
@@Ricardo49143 What the.. Receiving your message was a massive coincidence. Very odd. It wasn't after few days, I've had lense protectors for about 2 months now. And I don't know exactly when this happened. I know that when I first applied the lenses, there were absolutely nothing in between camera and lenses. I made sure to confirm this. Literally yesterday, while I was in work and just inspecting my phone's cameras, I noticed there were two dust particles stuck each dust in each telephoto camera. (The bottom big and bottom smaller one). I don't know how dust got inside protectors.
I followed your tutorial but I doubt whether the films have adhered to the lenses: how can I check this since I put them on as soon as I unpacked the smartphone?
For a video about camera lenses you would think actually using the camera with a set of before and after shots would be in order. No nothing like that. Instead its like seeing whether it fits with other cases. Useful but not the main topic
When i put an esr version of the lens protector it seemed to have fogged up. I also recently ordered one of these so i was wondering how to avoid the fog up of the lens. Ilany suggestions?
Hi there! No, it's not covering the mic. That's because the protectors don't go all the way down against the glass, they leave a very slight exposed portion at the bottom which allows for that. I have had no issues with my mic when recording videos so far :)
Dude, are the edges of the lens plastic or metal? I'm wondering if when fitting the lens, if it's metal, it can scratch the edges of the cameras that are made of aluminum.
Hi there, thanks for watching! I don't know about a spigen thin fit specifically, but I do own a clear spigen case and it fits perfectly. In theory Spigen claims that these lens protectors are compatible with all their cases.
I have this on my S23 Ultra with Spigen Tought Armor case and UAG Monarch case and both fit perfectly. Especialy with Spigen T.A. case, lenses are protectet realy excelent. With UAG protection is little less, but still very well.
Hey mate, do the protectors actually stick on the camera lens itself is the lens frame, my worry is that if I buy these and need to remove them the actual lens doesn't get damaged with glue - thanks
Still no issues with Af and quality hopefully? Ordered these today :)
Hello, how does autofocus work, especially the transition between lit and dark areas with these protectors installed? I read a review somewhere it ruins autofocus.
Hi there, thanks for watching!! I haven't personally noticed any difference in autofocus before vs after putting the protectors on, though to be fair I put the protectors on the phone a few days after buying the phone so maybe I didn't have time to get used to the "normal" autofocus? I still have the protectors on and haven't had any issues with the camera or with the focus. That's just my experience though of course :)
@@Zaknaberrnon That was a quick reply! Thank you for sharing your experience and the video. I'll go ahead and subscribe; best success to your channel! :)
Did you get some dust inside after few days?
@@Ricardo49143 What the.. Receiving your message was a massive coincidence. Very odd. It wasn't after few days, I've had lense protectors for about 2 months now. And I don't know exactly when this happened. I know that when I first applied the lenses, there were absolutely nothing in between camera and lenses. I made sure to confirm this.
Literally yesterday, while I was in work and just inspecting my phone's cameras, I noticed there were two dust particles stuck each dust in each telephoto camera. (The bottom big and bottom smaller one). I don't know how dust got inside protectors.
@@BladeMasterLegend Same thing happened to me, I don't have idea how the dust get inside.
Thanks for the vid Brother
"Nice the Spiegen provides two sets."
Like you're not paying for the extra 3 cents XD XD XD
😄
Does it affect picture quality when using the flash?
Hi, thanks for watching! Not that I've noticed :)
I followed your tutorial but I doubt whether the films have adhered to the lenses: how can I check this since I put them on as soon as I unpacked the smartphone?
Doe's it work perfect with the CaseBorne V Designed for Samsung Galaxy S23 Ultra Case ?
For a video about camera lenses you would think actually using the camera with a set of before and after shots would be in order. No nothing like that. Instead its like seeing whether it fits with other cases. Useful but not the main topic
Samsung 👍👍👍
how is it so far bro any problem , ? link please
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
The protector is Spigen so 100% sure it would fit Spigen cases
When i put an esr version of the lens protector it seemed to have fogged up. I also recently ordered one of these so i was wondering how to avoid the fog up of the lens. Ilany suggestions?
Just installed it and there are no issues in image quality or AF
Same buddy
Laser AF in case of ultra does not work in low light according to an amazon review from Germany
i just wondering if the protector is covering the microphone that has under or below de first top to bottom camera"!
Hi there! No, it's not covering the mic. That's because the protectors don't go all the way down against the glass, they leave a very slight exposed portion at the bottom which allows for that. I have had no issues with my mic when recording videos so far :)
Dude, are the edges of the lens plastic or metal? I'm wondering if when fitting the lens, if it's metal, it can scratch the edges of the cameras that are made of aluminum.
Exactly my question.
Can you remove them?
Thanks for this !
Thanks! I'm glad it was helpful! :)
Btw how do you get that phone😭😭😭
Have you tried with a spigen thin fit case? Does still fit?
Hi there, thanks for watching! I don't know about a spigen thin fit specifically, but I do own a clear spigen case and it fits perfectly. In theory Spigen claims that these lens protectors are compatible with all their cases.
Waiting for my cases
i read it on amazon that it should fit any spigen cases, as i also bought one of their cases and i went with this protector, lets hope it works
@@ShellShokerPT hopefully
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
Does it affect photo quality anyhow?
Not that I've noticed!
But while removing the cover the lens protector also gets removed
are you sure? I thought the same thing until I double checked.
Don't buy that it is going to break easily better use case with slider cover for camera
why was your hands shaking so much, are you on medication?
Awiwgsldosjd