NOTE: At the end of the video it says that we can change the *Amps* of the inductor to modify the behaviour of the circuit, this is wrong, it should say *Henrys*. Not sure how this translation error happened, in the original video and script it says Henrys. I will check in to this to avoid similar problems in the future 😁 by the way, new video on how X-Ray works is coming soon :) - EP -
Many products will reject a battery at 1.3 Volts and say "low battery". This is like putting 15 gallons of gasoline in our car and have it show empty when we use the first 2 gallons. The Joule Thief helps us get back what would be wasted.
Rather at 14.5 gallons down. Way most products are designed to run down to 1 volt per cell wich leaves the battery almost completely empty. The choice of 1 volt per cell has two resons First: Most devices has build in controllers that run on 3.3 volts and needs it stabilized (for a four cell device) wich introduces voltage loses. Secondly: A completely depleted battery is way more likely to start leaking.
It's not free energy, it is raising the voltage but reducing the duty cycle. So instead of steady flow of 1 volt, it will create pulses of 2 volt at 50% duty cycle (i.e. remaining on for only 50% of time). Free energy is when u r creating more energy than u r putting into the system, that is both voltage and current should increase.
I am from Poland This is free energy If you know how to use it and you know how to expand It will actually increase the current and voltage I know how to do it and I assure you it is free energy You write and probably do not understand what you are writing You have more energy at the output If you have, i.e. you take 5A and increase the voltage from 12 v to 200v then you already have more energy at the output So 12vx5 A = 60 watts At the input you have 60 watts And now at the output 200vx 5A = 1000 watts As you can see at the output you have 1000 watts As you can see at the output you have more energy
I doubt anyone understands this but a jewel thief is more or less a Tesla coil. Although tesla used the bifiler coil as a capacitor. More so if you at a capacitor with the same Capacity as the inductor in series it becomes a High frequency pulse amplifier.
I built a couple of those but still dont fully understand them. I even looked at them with an oscilloscope and I see what happens but it still puzzles me a bit. I dont really understand why the voltage goes higher and higher. When the magnetic field of the coil collapses it induces the high voltage. Then the transistor closes connection so the voltage can only go through the LED. But THEN the transistor switches on again.. Why doesnt the voltage just go to the negative terminal of the battery ? Or will the voltage induced be in series with the battery ?? Oh maybe I got it ?? Is the induced voltage in series with the battery over and over, thus increasing until it can flow through the LED (and being capped by the led ? Lol if that is correct just writing this comment made me understand it. I'll check to verify with my oscilloscope. PS: Thanks for the video ☺ I can clearly see that you put lots of effort in it :) awesome animations and explanation. Still hard to get your head around.
I know motorcycle ignition coil have similar mechanism, but if I wanna use it to deplete my motorcycle battery, will I have to use additional components?
Thank you Very much this was a very excellent explanation that helped me finally understand joule thiefs and the way I see it,,,it acts like a sort of voltage multiplier using the inductive spike as the multiplied voltage correct?....or like its a sort of auto transformer that will inductively build voltgae till it can overcome the led biasing voltage or whatever load is path b
*So many joule thief's on YT but they are all one transistor toys. How about a design for a 100 amp / 13.6 volt unit for charging up a BIG car battery from a half dead car battery. Now that would be useful.*
@@TheSimoc , yes and hundreds (or even thousands) of years before we name it "wreath of eternity". You can often see above triumphal arches, statues with crowns in their hands, this represents the power of the magnetic coils and some other secrets...
Until you know and understand how to capture it. The secret is that the magnetic field is unlimitedly duplicable when in this state. Voltage and current are just side effects. And today's entire planetary electricity system is built on this "small" and "limited" side effect. Have a good day.
Correct. It's simply a voltage booster. It doesn't create energy, it unlocks the energy from a low-voltage battery so that it can be used to power loads that need more voltage to work.
Per the textbook "Modern Thermodynamics" published by Wiley & Sons, with Authors Dilip Kondepudi and Ilya Prigogine, on Page 459 read - sharp gradients can violate the 2nd law of thermodynamics. This is documented in non-equilibrium thermodynamics. Look it up.
Ok all the super smart people here 2 questions, #1 if you increased the amount of coils and you wrap them to where there is multiple levels of coils stacked on top of each other does that mean that there would be more power produced? #2 if you take away the LED bulb and instead run it straight to the battery and you have a battery that is capable of recharging would this in turn recharge the battery? And I guess I have a 3 question how does a rechargeable battery work opposed to an alkaline battery? Why are you not able to recharge alkaline batteries? Thanks ahead to anyone that can comment or answer these questions
This is a nice explanation except you explained the transformer completely wrong. It is a center tapped inductor, not two opposing coils. The center tap is connected to the positive battery terminal.
Interesting animation, but you are wrong with your placement of the resistor and you missed key Insights ------> ruclips.net/video/ugPCH_3AIUQ/видео.html
Hi VirtualBrain, there's a channel called "鹰眼科普" that steals people's works and re-upload them. You are among the victims. This video is copied and pasted under a title "他就像電路中的資本家，神奇的焦耳小偷電路工作原理". You probably can report them to YT and get it taken down. You may find multiple of your works on their page, too.
*So many joule thief's on YT but they are all one transistor toys. How about a design for a 100 amp / 13.6 volt unit for charging up a BIG car battery from a half dead car battery. Now that would be useful.*
![VirtualBrain [ENG]](http://yt3.ggpht.com/X7upR1XVhcILHv4-WcO9pyM9BixmnDf77KGoE8R6eqr9tzefxy-ouiO_dMwbxE_gAMVZz0hDDA=s48-c-k-c0x00ffffff-no-rj)
NOTE: At the end of the video it says that we can change the *Amps* of the inductor to modify the behaviour of the circuit, this is wrong, it should say *Henrys*. Not sure how this translation error happened, in the original video and script it says Henrys. I will check in to this to avoid similar problems in the future 😁
by the way, new video on how X-Ray works is coming soon :)
- EP -
Would you be interested in collaborating with me on a new technology I've developed?
I want
水撃ポンプ(o・ω・o)
Many products will reject a battery at 1.3 Volts and say "low battery". This is like putting 15 gallons of gasoline in our car and have it show empty when we use the first 2 gallons. The Joule Thief helps us get back what would be wasted.
Rather at 14.5 gallons down. Way most products are designed to run down to 1 volt per cell wich leaves the battery almost completely empty. The choice of 1 volt per cell has two resons First: Most devices has build in controllers that run on 3.3 volts and needs it stabilized (for a four cell device) wich introduces voltage loses. Secondly: A completely depleted battery is way more likely to start leaking.
THIS VIDEO HELPED ME UNDERSTAND WORKING OF POWER BANK ALSO
Thank you for the spectacular explanation of materials and visual of operation
It's not free energy, it is raising the voltage but reducing the duty cycle. So instead of steady flow of 1 volt, it will create pulses of 2 volt at 50% duty cycle (i.e. remaining on for only 50% of time).
Free energy is when u r creating more energy than u r putting into the system, that is both voltage and current should increase.
Maybe it's called "free energy" because it's a way to use depleted batteries that have no value for average user?
so it's a power amplifier
@@alanx4121 yes dc to dc boost converter works on same principle.
I am from Poland This is free energy If you know how to use it and you know how to expand It will actually increase the current and voltage I know how to do it and I assure you it is free energy You write and probably do not understand what you are writing You have more energy at the output If you have, i.e. you take 5A and increase the voltage from 12 v to 200v then you already have more energy at the output So 12vx5 A = 60 watts At the input you have 60 watts And now at the output 200vx 5A = 1000 watts As you can see at the output you have 1000 watts As you can see at the output you have more energy
@@jacekwis512 rms, instantaneous or avg watts?
Very well explained. Simple. Thank You!
I doubt anyone understands this but a jewel thief is more or less a Tesla coil. Although tesla used the bifiler coil as a capacitor. More so if you at a capacitor with the same Capacity as the inductor in series it becomes a High frequency pulse amplifier.
Wow thank you. It is really the best explanation ever.
brilliant video
Amazing channel, thank you.
I built a couple of those but still dont fully understand them.
I even looked at them with an oscilloscope and I see what happens but it still puzzles me a bit.
I dont really understand why the voltage goes higher and higher. When the magnetic field of the coil collapses it induces the high voltage. Then the transistor closes connection so the voltage can only go through the LED. But THEN the transistor switches on again.. Why doesnt the voltage just go to the negative terminal of the battery ?
Or will the voltage induced be in series with the battery ?? Oh maybe I got it ?? Is the induced voltage in series with the battery over and over, thus increasing until it can flow through the LED (and being capped by the led ?
Lol if that is correct just writing this comment made me understand it.
I'll check to verify with my oscilloscope.
PS: Thanks for the video ☺ I can clearly see that you put lots of effort in it :) awesome animations and explanation. Still hard to get your head around.
Brother make a video on digital vernier calipers
Finely!!
Thanks
Great video. Right at the end "a few microAmps or MilliAmps" should be microHenries or milliHenries.
wait until you deal with mics and centimetres of inductance.
and jars of capacitance.
but yeah. it aint in amps...
Thanks for bringing this to my attention, it was a translation error 😓
Please requesting you make a video on digital vernier calipers
Thanks.
I know motorcycle ignition coil have similar mechanism, but if I wanna use it to deplete my motorcycle battery, will I have to use additional components?
moto's is a transgormer , if it uses the battery you have 12v to ~25000. That'll kill you.
The pinout of TO220 BJT's is incorrectly described in this video.
Lz make a video on AM transmitter and receiver by 555 timer
Thank you Very much this was a very excellent explanation that helped me finally understand joule thiefs and the way I see it,,,it acts like a sort of voltage multiplier using the inductive spike as the multiplied voltage correct?....or like its a sort of auto transformer that will inductively build voltgae till it can overcome the led biasing voltage or whatever load is path b
Need tazor cap residtor voil igniation spray tube extra thrust or thrust
*So many joule thief's on YT but they are all one transistor toys. How about a design for a 100 amp / 13.6 volt unit for charging up a BIG car battery from a half dead car battery. Now that would be useful.*
How does an electronic anti-drone guns work?
Me too.😊
Basically the gun is a powerful trasmitter with directional antenna to jamme the drone cummunications and electronics
@@circuit_autopsy no shit sherlock
Directed emp
Current doesn't flow Positive to Negative in that direction. How does any of this make sense?
I love You
Invented by Big Clive. He has a yt channel apparently.
He didn’t invent it. He just named it.
@@mikebond6328 Yep, and the official name, existed for around 100 years, is *blocking oscillator*.
@@TheSimoc , yes and hundreds (or even thousands) of years before we name it "wreath of eternity". You can often see above triumphal arches, statues with crowns in their hands, this represents the power of the magnetic coils and some other secrets...
"How Does the Joules Thief ⚡Free Energy Work?" it's not free energy...
Until you know and understand how to capture it. The secret is that the magnetic field is unlimitedly duplicable when in this state. Voltage and current are just side effects. And today's entire planetary electricity system is built on this "small" and "limited" side effect. Have a good day.
Correct. It's simply a voltage booster. It doesn't create energy, it unlocks the energy from a low-voltage battery so that it can be used to power loads that need more voltage to work.
Per the textbook "Modern Thermodynamics" published by Wiley & Sons, with Authors Dilip Kondepudi and Ilya Prigogine, on Page 459 read - sharp gradients can violate the 2nd law of thermodynamics. This is documented in non-equilibrium thermodynamics. Look it up.
昔の電話。大きなコイルが入ってました(o・ω・o)
@@timothyjohnson1511 and by sharp objects you mean...
Ok all the super smart people here 2 questions, #1 if you increased the amount of coils and you wrap them to where there is multiple levels of coils stacked on top of each other does that mean that there would be more power produced? #2 if you take away the LED bulb and instead run it straight to the battery and you have a battery that is capable of recharging would this in turn recharge the battery? And I guess I have a 3 question how does a rechargeable battery work opposed to an alkaline battery? Why are you not able to recharge alkaline batteries? Thanks ahead to anyone that can comment or answer these questions
🙏🏼🇧🇷🌱👍
Pure dedication! 😁
@@heikg Meu amigo vários anos pedindo esse vídeo. Graças a Deus chegou. 🙏🏼🇧🇷👍
The inductor is rated in terms of Henrys, notamps.
thanks for bringing this to my attention, it was a translation error 😓
This is a nice explanation except you explained the transformer completely wrong. It is a center tapped inductor, not two opposing coils. The center tap is connected to the positive battery terminal.
not enough power :c what a mood haha
Interesting animation, but you are wrong with your placement of the resistor and you missed key Insights ------> ruclips.net/video/ugPCH_3AIUQ/видео.html
I almost unsubscribed seeing the “free energy” tag in the header of that video! I am glad I did not
Makes sense why it's used to scavenge static from the air.
Boop
Hi VirtualBrain, there's a channel called "鹰眼科普" that steals people's works and re-upload them. You are among the victims. This video is copied and pasted under a title "他就像電路中的資本家，神奇的焦耳小偷電路工作原理". You probably can report them to YT and get it taken down. You may find multiple of your works on their page, too.
Dubbed in hindi
Make video in Hindi language
*So many joule thief's on YT but they are all one transistor toys. How about a design for a 100 amp / 13.6 volt unit for charging up a BIG car battery from a half dead car battery. Now that would be useful.*