Im glad you did this test . Ib been into car audio for 30yrs back in 1994 i hooked up 2 rockford fosgate 18" single voice coil 4 ohms .in a 10cubes box sealed on a kenwood 1021 kdc amp in bridged was 1000watts i wired the subs in parallel. An this amp puts out the same power @ 2 ohms . Funny today i could use this amp on my 15" crossfire c-7 v-3 1600 rms sub an it would do just fine in a 4 cubes box ported an tuned to 32hz . Thank for posting. Id just put my jp minni. On my mids.
I watched this review and was going to buy this amp on the marketplace..come to find out it was steromojo that I was buying it from..but this amp for the price is amazing..I have it hookup up to 2 deaf bonce machetes 2400 watts each wire done to 1 ohm and it is amazing...I don't really see myself needing anything more powerful
@@boogersandsnot1How is it still performing...I need to power 2x 10'' skar @ 1ohm...its this or the Recoil RED1200-1 2500...which was recomended on reddit car/av for a good budget amp
Does that thing have a Hall effect current sensor over that wire going across the board. If so that would be the first time I’ve ever seen that. Maybe for the protection circuit?
I think there should be a Blaupunkt Theorem. where Amp manufactures unnecessarily over inflate their amp rating when if they would just have given it its true rating or even under rated it, they would have not only sold more but would have gained a good reputation in the process, so it's regulated to Chinese junk even though price per watt and overall build quality it actually might be one of the best.
Sweet amp. Man, that thing will murder the alternators in Honda Accords and Toyota Camrys! Gosh, to able to buy this kinda power for that little money fresh outta high school…. man ol man.
You blew it lol i got the andeman 4 channel Friday and it good, not sure what power it puts out yet, waiting on your review, but its good for what am doing. I have a problem though, the power supply 😑
My wild guess on how they rate their rating is by doing math on the capacitor, resistor Ect Ect. By the looks they absolutely don’t dyno run the amps. Moreover nice job on the videos especially on this cheap strong amp. Is there a way I can strap or linked up 2 of this? Or how to hook up 2 of these one for each sub.
I'm wondering what the black ring is on the red output wire. I've never seen that before. Maybe an inductive clamp to measure output amperage? Maybe just a ferrite ring to reduce output noise? Anyone know?
I was wondering the same thing. Maybe why it went into protect so quick at .8 ohm. If that’s an inductive current probe then I’d be interested to see exactly how they’re using it.
@@stereomojo my first mtx setup was 2-12” mtx 8500 dual 2 ohm wired to 2 ohm and an original mtx 1501d the birth certificate was 1176 watts rms. It was in a custom ported box in the trunk of a 1995 Chevy cavalier. It did 138.x db. The x is because it’s been 23 years & I don’t remember the exact number.
@StereoMoJo- I go by the 10 watts per dollar ratio, to determine if the amp is a budget banger. This amp costing around $125 x 10 watts, so i was hoping it would do 1,250 watts R.M.S. So to see 1,600 R.M.S., and 1,800 burst, is really good for the $= this is a budget banger IMO! Plus anyone buying this amp should never wire below 1ohm, and so when playing music= with impedance rise, this amp will probably never go over 150 Amps of current draw!?
Pretty decent amp for the money. Really good protection circuit. The only thing I would have liked to see is some silicone on the chokes for vibration protection and rated as 1.5k amp.
#blauPUNKD is what it should be called nowadays 😆 I rmbr in the mid 90s they were real popular and I felt like they were looked at how Focal is looked it today
I paid $599 for a PPI PC275. Rated at 300w rms at 4ohms. This 5000d is much more powerful and for the money it is a steal. Doubt it has the quality of the ppi though.
@@stereomojo yeah I heard it’s mostly a lie or they do some crazy stuff to it during testing that nights show that power for a short period. Overall looking at the size of some of these amps it would seem like it has a bunch of stuff in there that would actually allow it . I mean I know little of nothing what I’m looking at in side of a amp thigh either 😂.still makes me wonder if it can be modded or something just to mess around with it and see if it gets more power
Hi Phonics is the same way you can run it at one ohm but you’re going to smell them. They’re gonna get hot🔥🔥🔥. If you continue to play them hot, your speakers will catch on fire, but at least they give you a one to two song playtime before self-destruction 😂. At 2ohm you can ride from Cali to Vegas(my driving 3 and uh half hours in the suv , 3hour flat in a v8 or turbo6 , 2hours on my YZF1000 2009 r1 Built push to 1100cc 🏃🏾💨💨💨💨💨🔥🔥🚓💨) playing your music nonstop and no fire no smoke( I would never run my amps at 1ohm if their a 1ohm load stable 🤨🤷🏽♂️🔥, it would have to be at least 0.5ohm stable for your system to run cool without self-destructing , literally 🤨) had a friend new to music, he had 12 tens solo x in a explore,😂, Fox hill mall 2005yr , this dude leaves his music on in the underground parking standing in the mall 😂😂, 2econd song 🔥🔥🔥🔥🔥🚒🧯🧯🐦🔥🚒👨🚒👩🚒, his sht caught big flames 😂, burnt his truck to a crisp .
While blaupunkt obviously overates their amps you cant beat the price for the true wattage your getting i have a 1504 blaupunkt on my 4 rear mids and highs class ab its rated at 150 rms at 4 ohms but its actually doing maybe 70 and it sounds awesome on my 4 front mids and highs i have a kenwood 400.4 class d sounds like trash in comparison but cost me twice as much so with that said im gonna spend 80 bucks for another 1504 and throw that kenwood in the trash cause thats where that overpriced pos belongs
@stereomojo no I do not I have an old school alpine mono that does 800 rms at 2 ohm the Blaupunkt is a 1504 4 channel class ab and as I said it blows my Kenwood class d out of the water and I've had it for about a year now no issues so with that being said I would be more than willing to try that 5000d for a hundred bucks as shown in the video it's doing 1100 rms at 2 ohms a kicker 1200.1 which does 1200 rms at 2 ohm costs 300 or more so for the price you can't beat that Blaupunkt!
Like anything else you gotta research and compare ! Sometimes the cheaper stuff is worth the money spent as far as reviews go on the 1504 its about 50 50 between good and bad from what I've seen the bad ones mostly complain about overheating which class ab tends to draw more current than d which creates more heat and also they were running 2 mids and highs and subs off the one Amp my opinion it's a mid and highs Amp only and I'm running 4 Guage wire to it it gets pretty warm but no hotter than any other amp who knows what other people are doing when they install.
Sometimes, you can tell by the price if it's true wattage and some amps are over-priced, and you're just paying for a brand. These amps are trash. Looks can be deceiving, especially on this amp.
Im glad you did this test . Ib been into car audio for 30yrs back in 1994 i hooked up 2 rockford fosgate 18" single voice coil 4 ohms .in a 10cubes box sealed on a kenwood 1021 kdc amp in bridged was 1000watts i wired the subs in parallel. An this amp puts out the same power @ 2 ohms . Funny today i could use this amp on my 15" crossfire c-7 v-3 1600 rms sub an it would do just fine in a 4 cubes box ported an tuned to 32hz . Thank for posting. Id just put my jp minni. On my mids.
That’s awesome! You had a nice system back then! Thanks for the support!
Should’ve called it AMP1500 and they would sell a ton at $99 bucks.
you said it best.
Been interested in this amp for a while now.. can't wait to see what she does.
Not too shabby for the price.
I watched this review and was going to buy this amp on the marketplace..come to find out it was steromojo that I was buying it from..but this amp for the price is amazing..I have it hookup up to 2 deaf bonce machetes 2400 watts each wire done to 1 ohm and it is amazing...I don't really see myself needing anything more powerful
@@boogersandsnot1How is it still performing...I need to power 2x 10'' skar @ 1ohm...its this or the Recoil RED1200-1 2500...which was recomended on reddit car/av for a good budget amp
Burning up at last part was the best thing 😂😂😂
That was actually a different amp. Stay tuned to the channel. Thanks!
It's actually not bad for the price. It gets over 1800rms watts for under $130 👍
I agree!
Write and think about it : 1600 w 20 years ago would have ran you know 1600 bucks.
$97 bucks on Amazon. I ordered 2
I have the $49.99 4K version on an American Bass XFL 15 probably giving it about 700 watts. It’s awesome honestly
Yeah, they’re actually pretty good for the money
I think the brand has changed something in the last 5 months but I don't know if it's an improvement
Does that thing have a Hall effect current sensor over that wire going across the board. If so that would be the first time I’ve ever seen that. Maybe for the protection circuit?
That’s what it looks like. Pretty cool
@@stereomojoyep it’s on the speaker output. Protects the amp when it senses overcurrent. Probably over 40A
I think there should be a Blaupunkt Theorem. where Amp manufactures unnecessarily over inflate their amp rating when if they would just have given it its true rating or even under rated it, they would have not only sold more but would have gained a good reputation in the process, so it's regulated to Chinese junk even though price per watt and overall build quality it actually might be one of the best.
Sweet amp. Man, that thing will murder the alternators in Honda Accords and Toyota Camrys! Gosh, to able to buy this kinda power for that little money fresh outta high school…. man ol man.
I think it’ll be cool if you made some videos of testing subwoofers at their power ratings
Yeah, I would enjoy doing that!
I like the business card you have for the info at the end,lol.
Thanks a bunch! I’m gonna start doing that with each one. If I can remember, I’ll try to always do it on camera.
You blew it lol i got the andeman 4 channel Friday and it good, not sure what power it puts out yet, waiting on your review, but its good for what am doing. I have a problem though, the power supply 😑
It wasn’t the Blaupunkt that blew at the end of the video. It was a top secret amp. Lol
@@stereomojo lol i saw someone say it was a cliffhanger
Omg they still make car audio? Last time I bought anything from Blaupunkt was a 12” sub from Caldor in 1996
Omg! Caldor! I haven't thought about that in years, lol good times.
My wild guess on how they rate their rating is by doing math on the capacitor, resistor Ect Ect. By the looks they absolutely don’t dyno run the amps. Moreover nice job on the videos especially on this cheap strong amp. Is there a way I can strap or linked up 2 of this? Or how to hook up 2 of these one for each sub.
Oh WoW ! what a Cliffhanger !
Lol, any idea what amp that was?
I'm wondering what the black ring is on the red output wire. I've never seen that before.
Maybe an inductive clamp to measure output amperage?
Maybe just a ferrite ring to reduce output noise?
Anyone know?
I noticed that too. Idk what it is, but pretty cool to see.
I was wondering the same thing. Maybe why it went into protect so quick at .8 ohm. If that’s an inductive current probe then I’d be interested to see exactly how they’re using it.
not bad for the price. So what did you do to make it hit 2082 watts and burn up?
That was actually a different amp. The Blaupunkt is still alive and well.
Pretty good for the buck doesn't get too hot either
Nemisis audio amp nobody has done it yet
Thanks!
I say the same thing. I have a 6k nemesis, and I haven't seen one done. I've been waiting to see one.
That’s pretty close to the mtx 1501d thunder elite. And I believe I paid 3 times that price 15 years ago.
I’d like to try some MTX. My first quality pair of subs was MTX!
@@stereomojo my first mtx setup was 2-12” mtx 8500 dual 2 ohm wired to 2 ohm and an original mtx 1501d the birth certificate was 1176 watts rms. It was in a custom ported box in the trunk of a 1995 Chevy cavalier. It did 138.x db. The x is because it’s been 23 years & I don’t remember the exact number.
@StereoMoJo- I go by the 10 watts per dollar ratio, to determine if the amp is a budget banger. This amp costing around $125 x 10 watts, so i was hoping it would do 1,250 watts R.M.S. So to see 1,600 R.M.S., and 1,800 burst, is really good for the $= this is a budget banger IMO! Plus anyone buying this amp should never wire below 1ohm, and so when playing music= with impedance rise, this amp will probably never go over 150 Amps of current draw!?
Thanks Evil. I agree!
Good job guys.
Pretty decent amp for the money. Really good protection circuit. The only thing I would have liked to see is some silicone on the chokes for vibration protection and rated as 1.5k amp.
It’s hard to disagree with that. Thanks!
HOW DID U BLOW IT @ THE END OF VIDEO. GREAT REVIEW
It was a trick! That wasn’t the same amp. lol
@@stereomojo OK. THANKS. GREAT REVIEW
@@tnastycuzz4031 thanks Cuzz! Lol
im a little confused if you drew 216amps through 160amp worth of fuses why didnt they blow?
They can handle a bit more power for a short period of time.
Omfg there rms slo blo fuses smfh it's easy to look shit up n probably get the correct answer
Nice for the price
#blauPUNKD is what it should be called nowadays 😆 I rmbr in the mid 90s they were real popular and I felt like they were looked at how Focal is looked it today
Stable @ 2 ohms probaly means its best to run at 2 ohms perhaps...the Recoil RED1200-1 2500 amp says stable down to 1ohm....
that's a great buy
Nothing below 1 ohm ive seen the amp videos on the dyno of this amp they should call it a 1500.1 d and they would sell alot more .
Oh you said the same thing at 19:40
looks like the planet audio 5,000 and that put out 1,500 as well
I paid $599 for a PPI PC275. Rated at 300w rms at 4ohms. This 5000d is much more powerful and for the money it is a steal. Doubt it has the quality of the ppi though.
Yeah, the value these days can be crazy good! What year was that PPI that you had?
Where do they get 5000 watt rating has it never done 5000 .. or is ut all a lie
It’s got to just be a lie. It won’t do it dynamically or go below 1 ohm, so the 5k doesn’t make any sense at all.
@@stereomojo yeah I heard it’s mostly a lie or they do some crazy stuff to it during testing that nights show that power for a short period. Overall looking at the size of some of these amps it would seem like it has a bunch of stuff in there that would actually allow it . I mean I know little of nothing what I’m looking at in side of a amp thigh either 😂.still makes me wonder if it can be modded or something just to mess around with it and see if it gets more power
Roughly 8 cents per watt is a hard bang for the buck to beat.
I can’t argue with that! Thanks!
Yeah man my cousin have 1 on 2'15s it hits low notes without base knob
The bass knob has nothing to do with power output.
Maybe they mean strapped?
Hi are you still teaching MATH?
Teaching math?
It means you can run it at 1ohm but your going to smell it🤨,,
At 2ohm you can play it all day .
Hi Phonics is the same way you can run it at one ohm but you’re going to smell them. They’re gonna get hot🔥🔥🔥.
If you continue to play them hot, your speakers will catch on fire, but at least they give you a one to two song playtime before self-destruction 😂.
At 2ohm you can ride from Cali to Vegas(my driving 3 and uh half hours in the suv , 3hour flat in a v8 or turbo6 , 2hours on my YZF1000 2009 r1 Built push to 1100cc 🏃🏾💨💨💨💨💨🔥🔥🚓💨) playing your music nonstop and no fire no smoke( I would never run my amps at 1ohm if their a 1ohm load stable 🤨🤷🏽♂️🔥, it would have to be at least 0.5ohm stable for your system to run cool without self-destructing , literally 🤨) had a friend new to music, he had 12 tens solo x in a explore,😂,
Fox hill mall 2005yr , this dude leaves his music on in the underground parking standing in the mall 😂😂,
2econd song 🔥🔥🔥🔥🔥🚒🧯🧯🐦🔥🚒👨🚒👩🚒, his sht caught big flames 😂, burnt his truck to a crisp .
15:48 I always run a secondary large cranking amp battery,
With a battery isolator on all my sound performance vehicles .
See I just said 🔥🔥🔥🔥
4ohm rating will be 1ohm dynamic. Maybe…
looks like a ocean audio 1200.1
Hmmm, that’s interesting.
@@stereomojo I've been checking Alibaba and they are all there 🤣
This amp is $100 on Amazon right now!
While blaupunkt obviously overates their amps you cant beat the price for the true wattage your getting i have a 1504 blaupunkt on my 4 rear mids and highs class ab its rated at 150 rms at 4 ohms but its actually doing maybe 70 and it sounds awesome on my 4 front mids and highs i have a kenwood 400.4 class d sounds like trash in comparison but cost me twice as much so with that said im gonna spend 80 bucks for another 1504 and throw that kenwood in the trash cause thats where that overpriced pos belongs
@@heckj78 do you have Blaupunkt monoblock as well?
@stereomojo no I do not I have an old school alpine mono that does 800 rms at 2 ohm the Blaupunkt is a 1504 4 channel class ab and as I said it blows my Kenwood class d out of the water and I've had it for about a year now no issues so with that being said I would be more than willing to try that 5000d for a hundred bucks as shown in the video it's doing 1100 rms at 2 ohms a kicker 1200.1 which does 1200 rms at 2 ohm costs 300 or more so for the price you can't beat that Blaupunkt!
Like anything else you gotta research and compare ! Sometimes the cheaper stuff is worth the money spent as far as reviews go on the 1504 its about 50 50 between good and bad from what I've seen the bad ones mostly complain about overheating which class ab tends to draw more current than d which creates more heat and also they were running 2 mids and highs and subs off the one Amp my opinion it's a mid and highs Amp only and I'm running 4 Guage wire to it it gets pretty warm but no hotter than any other amp who knows what other people are doing when they install.
Can this amplifier be strapped? Maybe that's where they got their RMS rating from 🤔🤫😂
😂😂😂😂😂😂😂😂😂😂funny moment
@@jorgerccarupgraderodriguez5720 lol, which part?
I was totally disrespectful and said 800 total!!! Boy was I wrong 😂
It puts out decent numbers for the money!
isnt every amp 2 ohm stable tho lol
Yes, lol. I don’t understand why they put that on there.
Sometimes, you can tell by the price if it's true wattage and some amps are over-priced, and you're just paying for a brand. These amps are trash. Looks can be deceiving, especially on this amp.
No, that isn't decent power when it's rated, marketed and sold listing over double, close to triple, the power.
It's still decent power for the price, regardless of inflated output claims
@@TripleOgTripleOgTriple and that viewpoint is why amps like this are still marketed and sold the way they are
No it's not 😂
Lame....as expected.
V dissapointing results, however it does 1000W on 2ohms which is what i wanted.