Hi, just a note, make sure it's a genuine filter, Bosch or other. I just changed mine and it was a no name, didn't think anything of it, spent a week trying to clear air. Eventually I noticed it was dripping fuel, not easy to see. So I replaced it with the old one! cleared the air and the problem stopped. I'm not a novice but this is the first time anything like this has happened to me. Off to Ford, lesson learned.😅
A légtelenítéshez szükséges egy LABDAPUMPA, 10mm csatlakozóval. Autósboltokban kapható 8, 10 és 12 mm csatlakozókkal. A 10mm változat a Ford, Peugeot, néhány Volvo és Fiat modellben használatos, japán vagy német alkatrészekre szakosodott üzletekben esetleg csak a 8mm változat kapható. Érdemes felhívni a szaküzletet vásárlás előtt.
BALL PUMP for vent, with 10 mm diameter connectors -- sold in car part shops. Call the shop before visiting: there are versions with 8, 10 and 12 mm connectors. 10 mm is used in Ford, PSA some Volvo and Fiat diesel engines. Shops specialized to Japanese or German cars might only have ball 8 mm version. Example ball pump. realize the arrow on the ball: images-na.ssl-images-amazon.com/images/I/41Ts5ypv8KL._SY355_.jpg
nb if you run your car until fuel tank gets empty and engine stops, it is possible that engine will not start after refilling the fuel tank, even if attempting for prolonged periods. same ball pump might be necessary to refill the filter -- and occasinally the hoses from the filter to the high pressure fuel pump, too. this part is not shown in the video.
Udv! Nekem egy Volvo V50em van,ugyanez a metodusu rendsszerrel. Megcsinaltam ugyan igy ahogy a video bemutattad kezipumpaval. De nekem nem indul az auto,hiaba oninditozok nem akar beindulni. Az akksim lemerult kozben. Tudnal segiteni nekem hogy hogyan keltsem eletre az autot? Koszonom elore is. Udv:Tamás
Hello, Thanks for the vidéo 👌 I’m looking for the reference of the support cover (wich you dismantle at the eleventh second) That will be very helpfull if you can give me the oem number Many Thanks
Hi, just a note, make sure it's a genuine filter, Bosch or other. I just changed mine and it was a no name, didn't think anything of it, spent a week trying to clear air. Eventually I noticed it was dripping fuel, not easy to see. So I replaced it with the old one! cleared the air and the problem stopped. I'm not a novice but this is the first time anything like this has happened to me. Off to Ford, lesson learned.😅
This is by far the best, clearest video to show this procedure on the internet. Thank you for posting!
A légtelenítéshez szükséges egy LABDAPUMPA, 10mm csatlakozóval. Autósboltokban kapható 8, 10 és 12 mm csatlakozókkal. A 10mm változat a Ford, Peugeot, néhány Volvo és Fiat modellben használatos, japán vagy német alkatrészekre szakosodott üzletekben esetleg csak a 8mm változat kapható. Érdemes felhívni a szaküzletet vásárlás előtt.
Köszi a részletes videót
BALL PUMP for vent, with 10 mm diameter connectors -- sold in car part shops. Call the shop before visiting: there are versions with 8, 10 and 12 mm connectors. 10 mm is used in Ford, PSA some Volvo and Fiat diesel engines. Shops specialized to Japanese or German cars might only have ball 8 mm version.
Example ball pump. realize the arrow on the ball:
images-na.ssl-images-amazon.com/images/I/41Ts5ypv8KL._SY355_.jpg
Good explanation, thanks.
You can pre-fill the fuel filter before refitting, but if vehicle have run out of fuel you must prime system after re filling tank ...............
nb if you run your car until fuel tank gets empty and engine stops, it is possible that engine will not start after refilling the fuel tank, even if attempting for prolonged periods. same ball pump might be necessary to refill the filter -- and occasinally the hoses from the filter to the high pressure fuel pump, too. this part is not shown in the video.
Video is informative and well done! Very helpful. Thank you.
it shows clearly inlet and outlet pipes .Which is what i was after !
Udv! Nekem egy Volvo V50em van,ugyanez a metodusu rendsszerrel. Megcsinaltam ugyan igy ahogy a video bemutattad kezipumpaval. De nekem nem indul az auto,hiaba oninditozok nem akar beindulni. Az akksim lemerult kozben. Tudnal segiteni nekem hogy hogyan keltsem eletre az autot? Koszonom elore is. Udv:Tamás
nem vagyok autószerelő, nem értek hozzá, egyszerűen csak megcsináltam magamnak ezt a cserét.
Hello,
Thanks for the vidéo 👌
I’m looking for the reference of the support cover (wich you dismantle at the eleventh second)
That will be very helpfull if you can give me the oem number
Many Thanks
hello, I am not belonging to Ford at any level...