Launch CRP919e BT coding the BMW FRM module after repair with CG100pro.
HTML-код
- Опубликовано: 4 окт 2024
- After this FRM module is repaired with CG100pro, in most cases it needs to be coded.
For those interested in this programmer, I recommend that you buy it from the manufacturer because there are many fakes on the diagnostics market.
The link for those interested in this programmer:
Launch CRP919EBT
UK www.amazon.co....
DE
www.amazon.de/...
USA
www.amazon.com...
Nice work. Thank you.
👍
Hello Yoyo în me opinion is very good this tool, thank you for The time and knoledge. All the best
Thank you for your support 👍
thank you man for this information
👍
🤣 I agree with you! Some of them they like to drive BIG cars but got a small wallet to fix it🤣 * Not all of them * Great video again!
👍
I have the same model of Launch bit I bether perfer Autel scaners..bdw good video,like to wach your videos
Autel is a great tool too 👍
Great video ❤
Thank you 👍
You can connect it via usb as well.
I emailed and suggested Topology for this one and Launch isn't planning to do that unfortunately
@@c.adamscott2312 thanks for the info 👍
Have you lost the ability to program tire pressure sensor id numbers into your vehicle computer with your scan tool? The one I bought allowed me to program in the id codes for 2 of my new tire pressure sensors on a 06 dodge grand caravan, but I didn't do all 4 at one time. After I finally changed the other tires, the reader wouldn't connect to the van any longer so I updated the software on the scanner. Now, it will no longer allow me to do anything but see the id numbers. Even then, I have to fight through various menus to get to that point. The scanner I bought is the non-bluetooth version by the same seller.
This is a software problem. Did you write to the company Launch about this problem ?
@@YOYODiagnostic I've gone back and forth with them to the point that they admitted that they can't push the old software as an update to fix their screw-up, and they'd rather send me new proprietary tpm sensors and a tool that is supposedly going to work to get the vehicle to recognize them free of charge, rather than fix the software and push a new update.
Hi. I have a question about this tool. Can it do mercedes scn coding?
Thanks for your time
And continue with great videos.
Hi.
I will give it a try and I'll let you know or I will make a video.
hello can you help me, can you tell me if that tool read the security pin from a 2005 astra h ,thanks
@@rud_01 I didn't try it..ask company Launch
I have the same scanner. I don't like it. My xtool m30a works better for a lot less money. I would send it back if I bought it from Amazon. I bought it direct from
Kingbolen, and I would have to pay for shipping and a restocking fee.
@@hitechrr that's your opinion and I respect it, but you have no way to compare this programmer with launch, Xtool doesn't do coding on any car, I've used several programmers from this company, for scanning they're ok, the rest leaves a lot to be desired.
Hello,what do you recomend Topdon artidiagpro vs launch 431pros crp919x bt. ?
Hi,
your comparison is not correct because artipad can do coding and Launch named by you does not have this function. Look well informed and read carefully what the manufacturer writes. Launch CRP 919x cannot do coding, this one is cheaper, For 100 euros more you buy CRP 919E which fulfills the same conditions as Artipad named by you. To summarize, they all belong to Launch (Topdaon, ThinkPad, thinkcar, Kingbolen, Artipad). All these companies are children of Launch.
@@YOYODiagnostic ok thank you very much, i think best choice is crp919E
Can this tool code bmw e60 szl?
Yes
Does this have scn coding
It has an option for SCN but I didn't try it.
hello , i watched your video about VCX and i'm confused between it and scanmatik 2pro
i'm new to programming and diagnosing
and i'm searching for the best pass-thru
because i'm a beginner
what do you recommend for me
i will mainly scan European cars (Renault - mb - bmw - vw - fiat ..etc )
thank you
Hello. What do you want to do scanning the car or do you think about tuning?
@@YOYODiagnostic
scanning and diagnosing
and programing the ECU (Delete EGR...etc)
programing gearbox
not sport tuning
just basic maintenance or problem diagnosing
I think you are confusing things a bit. EGR delete belongs to the tuning programmer, which is ruled out because this is a j2534. It replaces certain original diagnoses and that's about it.
@@YOYODiagnostic
yeah i searched about it
but now i want a suggestion from you
for a scanner i can start working with
is it the VCX or Launch or Autel or SM2 pro original
@@Flash-bu3ug
Again your comparison is not good. Launch and Autel have their own operating software. VCX and SM2 pro are based on other software, they do not have an operating system. So it is clear that Autel or Launch is more efficient.
If you are stupid you must pay 😂😂 love it , great vids as always mate , couple of questions I might have missed you saying on the video ?
Can you use off line or just internet only ?? And can you use after sub run out or is a brick ?
Any idea what the update cost are ?
Thank you
You're right, I missed some information in the review, thanks for reminding me 👍
The license is about 150 euros per year from what I saw. After the 2 years of free update, if you don't want to pay for the license, the programmer can be used without any problem, only that you can no longer update. Yes, it can be used offline, I used it and there is no functionality problem, only in the case of the Ford brand, which requires an internet connection if you want to do certain resets.