How to Remove & Replace Hyundai Accent Exterior Door Handle for MC (2005-2011) Hatchback & Sedan

In this video we demonstrate how to Replace Hyundai Accent Exterior Door Handle for MC (2005-2011) Hatchback & Sedan
The whole job took roughly 15 Minutes.
Product Available Here For $38.30
partsfactoryau...
Drift Trikes Australia ( Electric Drift Trike )
drifttrikesaus....
Subscribe and comment on this video for any video requests! Learn to be your own mechanic and save loads per year on maintenance costs!

[@EmmanuelLopezRivera]

You just saved me $350 bossman, appreciate you!

[@carll4992]

Thanks a lot! I like the detail you put in this instruction. I just finished my daughter’s car, both doors.

[@thepartsfactory4239]

Glad it helped

[@guydecarufel7174]

Some things to take note:
- If you have a manual window crank, start with that, it took me over an hour just to figure that out. Use a small pick and pull the pin between the plastic ring and the panel, it is very hard to get too. Only put it back when you are completely done with full inspection
- Taking the door panel off was a pain, easier if you roll down the window first. You can roll it back up after. The panel slides into the window crack, so after you popped the panel off, lift it up
- That black "bracket" covering the whole for the ratchet is actually a window guide, easier to remove it completely from both screws so it's not it the way
- When reassembling the new handle, don't forget the plastic seal ring around the smaller keyhole part
- when reassembling the handle, make sure the handle is in completely and aligned with the spring before putting the bolts back on
- last gotcha, make sure you plug the speaker back on before placing the panel, easy to forget.
- when placing the panel back on, easier with window down
After putting in the last screw I realized I forgot the outer black seal and plugging in the speaker, so... Starting over after working this for 3h. Hopefully this helps.

[@thefl00rislava39]

Just done the replacement right now !! Thank you so much saved me some money 💪🏼

[@thepartsfactory4239]

Glad I could help!

[@pheonixun]

Thanks so much for your informative video. Now I think I can fix my car handle issue with confidence thanks to your help.

[@thepartsfactory4239]

No problem 👍

[@GreggHorvat]

Perfect walk through! Much appreciated!

[@thepartsfactory4239]

Glad it was helpful!

[@SilverKnight16]

This is my exact model of car, and I'm so glad I found this. This has saved me a LOT of money, thank you!

[@thepartsfactory4239]

Glad I could help!

[@mitchv.7492]

Thanks, very helpful

[@thepartsfactory4239]

Glad it was helpful!

[@TheGODs69]

Can you do the hood release cable?

[@graufuchs88]

Gs version here. Literally everything was different. Right part, wrong instructionsthe two screws at the right side of the door panel had two impossible to get off plugs over the screws. At 5:16, bracket does NOT come off. Bracket is in the way of 10mm bolt

[@baileycreten2875]

Hey mate, is the same for the I30’s?

[@thepartsfactory4239]

We have the i30 video on our channel :) different

[@baileycreten2875]

⁠@@thepartsfactory4239 that video is it the same process for a 2014 trophy?

[@thepartsfactory4239]

@@baileycreten2875 2014 no. We haven't done that product yet. Definitely in production!

[@baileycreten2875]

@@thepartsfactory4239 no worries thanks for the reply appreciate it. Is there a chance you’re doing a steering wheel for the 2014 too?! 🤞🤞

[@thepartsfactory4239]

@@baileycreten2875 watch the elantra clock spring video that'll show you roughly. Thx

[@tay_tah_totadventures4606]

I did this but my windows won’t work now
Any tips

[@thepartsfactory4239]

Master Control switch isn't plugged in

[@DouglasBMorris]

R,rr Dr HDL?

[@DouglasBMorris]

Mine is a Elantra.