Thanks alot for explaining the L3 messages. May i know when you plan to post a video on KPI troubleshooting using L3 messages? Eagerly waiting for it.. Thanks again for the great work!
Great explanation !!! Thanks for the efforts and will definitely would like such Log Analysis to explain other aspects of 5G specially the Throughput Analysis which you mentioned And i guess the tool won't be available for free?
Thank you so much, Sir. Very well explained. In msg3 (RRC setup request), apart from 5G-s-TMSI value, would I be able to see the timing advance value? Thanking you in advance.
1)The pdcch-config (monitoringSymbolsWithinSlot) within RRCSetup message is the Ue-specific search space configuration.Is it correct? 2) Common Search space and Ue-Specific Search space are both within same Coreset.Is it correct?
Actually, I only had a demo version for a short period of time. You would have to contact Mr. Yian from Sanworl - his linkedin contact is already there in the description of the video :)
Yes, there isa difference as LTE has CRS that are present all the time so RSRP is based on those RS. While 5G does not have CRS that are present all the time so SSS is used instead to estimate RSRP. This is same in both 5G NSA and 5G SA.
The tool is from Sanworl In case, you would like to explore the tool, you can visit their website or contact Mr. Yian. sanworl.com/ Mr. Yian Fang - MD Sanworl www.linkedin.com/in/yian-fang-780a9ab/
The tool details, you can see below along with the contact person In case, you would like to explore the tool, you can visit their website or contact Mr. Yian. sanworl.com/ Mr. Yian Fang - MD Sanworl www.linkedin.com/in/yian-fang-780a9ab/
The MAC/PHY layer is responsible for handling RACH procedure. But the RACH parameters are highlighted to the UE in RRC messages or in System Information messages. You can take a look at the following session for more details on RACH ruclips.net/video/LyCxfNIL8Sg/видео.html
For simplified 5G tutorial sessions, check out the complete playlist below :)
🌐5G Call Flows & KPIs
💡ruclips.net/p/PL4OXTttOk9WhvApKwJBcZx0G4a2m8N-z6
The best L3 analysis on RUclips ever!
Thanks a lot
The best technical 5G L3 video ever!
Thanks a lot :)
One of the best videos on 5G SA Call Flow! Hats off 👌🏻
Really means a lot, Thanks a lot!
Awesome work … best explanation so far I have seen …
Thanks a lot, great to hear this :)
Thank you so much for such detailed information!
Glad that it helped :)
Very well explained and you perfectly explained step by step. Thanks for sharing
Glad it was helpful!
❤❤❤ Thankyou very much for this session 🙏🙏🙏🙏🙏
You're most welcome
perfect . Please more of them ... VOLTE analysis also
Thanks. Will work on them soon.
Nice explanation sir, it's easy to understand.
Thanks , Good to hear that :)
it is really helpful. Thanks a lot for sharing such valuable knowledge.
Most welcome!
Nice explanation. Please upload 2 part...
Soon! Stay Tuned!
Fantastic explanation
Thanks!
Thanks alot for explaining the L3 messages. May i know when you plan to post a video on KPI troubleshooting using L3 messages? Eagerly waiting for it.. Thanks again for the great work!
Thanks, it is in the pipeline and will try to post soon :)
Excellent Bro, keep it up...
Thanks :)
Great! Great! Great!
Thanks
Is the kssb parameter used along with offset_toPointA for the SSB position within carrier bandwidth? Thank you
Great explanation !!!
Thanks for the efforts and will definitely would like such Log Analysis to explain other aspects of 5G specially the Throughput Analysis which you mentioned
And i guess the tool won't be available for free?
Thanks Munzir. You may ask the Mr. Yian about the tool details (I have given his linkedin in the description)
Thank you so much, Sir. Very well explained. In msg3 (RRC setup request), apart from 5G-s-TMSI value, would I be able to see the timing advance value? Thanking you in advance.
TA comes in RACH MSG-2
The scheduling info of other SIBs- that SIB1 provides- indicates where the PDSCH resource blocks of the specific SIBs are located. Correct ? Thank you
Yup
Great!!!
Glad that you liked it!
Awesome video . Is it possible to share the DT file . I want to do it by myself as well
Sorry, unfortunately, I do not have the file with me at the moment.
1)The pdcch-config (monitoringSymbolsWithinSlot) within RRCSetup message is the Ue-specific search space configuration.Is it correct?
2) Common Search space and Ue-Specific Search space are both within same Coreset.Is it correct?
can you share the drive link to download the setup of this software along with few log file?...only for the learning purpose
Actually, I only had a demo version for a short period of time. You would have to contact Mr. Yian from Sanworl - his linkedin contact is already there in the description of the video :)
@@OurTechPlanet thanks for reply. do we have any other 5G UE Log processing tool which can be use for trial purpose?
@@varun284 I am not aware of any reliable too that works without a license.
You said that RSRP is calculated based on SSS power at 6. 30. In LTE rsrp is the average of REs carrying RS power.. so in SA it is different?
Yes, there isa difference as LTE has CRS that are present all the time so RSRP is based on those RS. While 5G does not have CRS that are present all the time so SSS is used instead to estimate RSRP. This is same in both 5G NSA and 5G SA.
Hi, Thank for explaining beautifully. Can you also tell some tools to test URLLC feature development. Thanks for the help in advance.
Thanks. Haven't worked on URLLC features yet. Will check for you.
Waiting for L3 analysis based on KPI optimization
In the pipeline, stay tuned :)
What tool are you using in this video to present that analysis?,is it proprietary or is it free?
The tool is from Sanworl
In case, you would like to explore the tool, you can visit their website or contact Mr. Yian.
sanworl.com/
Mr. Yian Fang - MD Sanworl
www.linkedin.com/in/yian-fang-780a9ab/
In msg3 (RRC setup request), apart from 5G-s-TMSI, a random value also included for contention resolution. Correct? Thank you
Yes, correct
perfert presentation, could you share the 5G Resource Grid slide? thanks
Thanks. At the moment, we are unable to share the materials. Thanks for understanding :)
@@OurTechPlanet Thanks
Can you please share the log and the tool?
The tool details, you can see below along with the contact person
In case, you would like to explore the tool, you can visit their website or contact Mr. Yian.
sanworl.com/
Mr. Yian Fang - MD Sanworl
www.linkedin.com/in/yian-fang-780a9ab/
folks please let me know whether RACH procedure is responsiblilty of RRC layer or MAC layer?
The MAC/PHY layer is responsible for handling RACH procedure. But the RACH parameters are highlighted to the UE in RRC messages or in System Information messages. You can take a look at the following session for more details on RACH
ruclips.net/video/LyCxfNIL8Sg/видео.html
Can you plz share PPT file
Sorry, we are not sharing the ppt files at the moment. Thanks for understanding.
Kudos guys🫡, another great video for every RF engineer out there
Thanks Ankit! :)
what is this tool?
The description said Sanworl Focus Analyzer
I pasted the link in the description
Awesome video . Is it possible to share the DT file . I want to do it by myself as well
Sorry, unfortunately, I do not have the file with me at the moment.