This is guy is past being a beginner and he fighting with the trim which is a a very simple process to remove. He made his job harder than it suppose to be.
I watched this to the end. . . painfully. . . because I wanted to prove to myself that I am patient and have a very long attention span. Thanks for the video... it is helpful. In the future, using the "pause" or "stop" button would probably make for a much shorter video.
Kinda would be nice with some narration but i got wht i needed i guess ill replace the steppers in my mom's car i have the x25's that came out of my suburban I only had 2 bad ones i threw those away but i guess it will be fine
I just need to replace the light bulbs on the heater control switches on my mom's car. Basically the right side of the a/c panel there. Hopefully without quite as much dis-assembly.
the light bulbs in the gauges, center stack, and radio on these cars are not user serviceable, due to their installation into the circuit boards. they are soldered onto the board, you will have to order a new unit through a parts website. ran into the same problem with this car, ended up spending the money for the new part (worth it.)
my 2003 buick lesabre custom never had this light flashing for 2 months of owning it I purchased it and now the top left side of the radio red light led is flashing yet it goes off always when i START THE CAR IS THIS NORMAL OR IS SOMETHING GOING TO HAPPEN . ALSO CAN i RESET IT TO DEFAULT SO THE LIGHT GOES AWAY LIKE BEFORE
+David Silva No se, si te soy sincero este cluster le fallaban las augujas de gasolina y de la velocidad, para arreglarlo lo mande a que me lo arreglaran a un lugar especializado ...saludos!!
this was a horrible guide. first off he already had the vent cap removed and light control. they don't come off like that. then he didn't remove a screw up against the right side of the steering column and just broke the bezel bracket. that is why he had such a hard time removing it. end result was a fail. luckily I look first and pry last and you can see the screw attaching the bezel just below and to the left of the temp gauge.
This is guy is past being a beginner and he fighting with the trim which is a a very simple process to remove. He made his job harder than it suppose to be.
Great video. Thank you for your patience and visual instruction
I watched this to the end. . . painfully. . . because I wanted to prove to myself that I am patient and have a very long attention span. Thanks for the video... it is helpful. In the future, using the "pause" or "stop" button would probably make for a much shorter video.
I just removed one from a 2004 Lesabre, this video helped me a lot.
Can you do a video on how to replace the drop down ashtray?
looks like this was your 1st time doing this
Thank you for your video. Saved me from breaking things.
Thanks for the info!
I need to Replace the Cruise Control On/Off switch, but i don't know how to disassemble the steering wheel.
I need to do this to remove my CHECK ENGINE light bulb, and also my BRAKE light bulb, that way those things are fixed, thanks for posting :P
dash light on Chrysler pacfic 205one on right dide botton what is the light to
WOW took him more than five minutes on that one stripe,,why did you run the video,, do it first then take video,, Oh wait his not done yet,,
esta bien gracias aver si puedo encontrar uno por aca
Kinda would be nice with some narration but i got wht i needed i guess ill replace the steppers in my mom's car i have the x25's that came out of my suburban I only had 2 bad ones i threw those away but i guess it will be fine
I just need to fix the air and heat control tabs, they both broke off inside so I can't regulate either...
I just need to replace the light bulbs on the heater control switches on my mom's car. Basically the right side of the a/c panel there. Hopefully without quite as much dis-assembly.
the light bulbs in the gauges, center stack, and radio on these cars are not user serviceable, due to their installation into the circuit boards. they are soldered onto the board, you will have to order a new unit through a parts website. ran into the same problem with this car, ended up spending the money for the new part (worth it.)
Where did you get the two "tools"?
in harbor freight tools, for like 10 bucks
Jim Hyde dont need em
my 2003 buick lesabre custom never had this light flashing for 2 months of owning it I purchased it and now the top left side of the radio red light led is flashing yet it goes off always when i START THE CAR IS THIS NORMAL OR IS SOMETHING GOING TO HAPPEN . ALSO CAN i RESET IT TO DEFAULT SO THE LIGHT GOES AWAY LIKE BEFORE
Its a security light.
I FOUND OUT THE HARD WAY BUT YOUR RIGHT it just blinks when the doors are locked .
Man, its kicking your ass!
me puede decir como cambiar la bomba de gasolina por favor
de un buick 95 no se como cambiar la bomba de gasolina
HOLA QUE TAL TENGO UN PROBLEMA CON MI CHEVY C2 2005 MPFI, ANDA CASCABELEANDO ME GUSTARIA ME AYUDARAS A RESOLVER ESTE PROBLEMA
q tal tengo un escort q le quiero cambiar el cluster le puse otro y le quemo una pieza q creo es una placa pequeña donde crees q este la falla
+David Silva
No se, si te soy sincero este cluster le fallaban las augujas de gasolina y de la velocidad, para arreglarlo lo mande a que me lo arreglaran a un lugar especializado ...saludos!!
faisol
Es UN huevo quitarlo
this was a horrible guide. first off he already had the vent cap removed and light control. they don't come off like that. then he didn't remove a screw up against the right side of the steering column and just broke the bezel bracket. that is why he had such a hard time removing it. end result was a fail. luckily I look first and pry last and you can see the screw attaching the bezel just below and to the left of the temp gauge.
Ja