How To Add A New Keypad Code To 2013 - 2019 Ford Escape - Create Driver's Door Key Pad Code

A quick video tutorial on how to add a new code to the driver's door keypad on a 2013 - 2019 Ford Escape. In order to be able to create a new or additional code to the keypad that is located on the drivers door of your Ford Escape, you will need the permanent factory key pad code. If you do not have the permanent factory door keypad code, there is a video on how to locate it below.
The video on how to find your Ford Escape door keypad code is here • How To Find The Keypad...
This video will show you how to add an additional driver's door keypad code on the following Ford vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape
More free keyless entry remote fob programming instructions available at www.ProgramYourRemote.com/
Free Ignition key programming procedures available at www.ProgramAutoKeys.com/
Find a Locksmith in your area with www.LocateALocksmith.com

[@elizabethpeterson1644]

I was lucky on getting that 5 digit code but, I did changed it to something easy for me to remembered on my 2011 Mercury Milan, 2015 Ford Escape, and even the same code on my 2020 Ford Escape. The 1st 2 vehicles that I did by myself w/o any help. I did have a little help on the last one. It was done inside of the vehicle. It was easy to typed the new code into it. Even my parents had vehicles with an easy code to remembered even for me,too. Their very 1st car that had a key pad on the door was a 1988 Ford Taurus. That one the code wasn’t changed at all. I even remembered it no problem. I even had fun in opening the car doors just after typing in the code.

[@garkdesign]

So simple and straight to the point, thanks so much! :D

[@PYR-Auto]

You're Welcome!

[@samanrasul9306]

your videos helpful. thank you.

[@PYR-Auto]

You're Welcome! Glad it helped

[@shrittahagan3797]

THANK YOU!! Very informative.

[@PYR-Auto]

You're Welcome!

[@niicolelyons3980]

It worked GREAT!!!! Thank you!!

[@PYR-Auto]

You're welcome!

[@evxl]

Thank you so much for your advice, you're awesome. The dealership would probably charge hundreds.

[@PYR-Auto]

You're Welcome!

[@bluphoenix.rising3983]

Awesome! Thanks. This will make life a little better.

[@PYR-Auto]

You're welcome!

[@johngarrett4200]

Thanks, well done

[@PYR-Auto]

Thanks!

[@marianneapple2533]

Thank you! 🥰

[@PYR-Auto]

You're welcome!

[@adrianrenedo8046]

Thank you good video help a lot

[@PYR-Auto]

You're Welcome!

[@TryRickPayton]

Thanks ❤

[@PYR-Auto]

You're Welcome!

[@sherboota4161]

Thank You

[@PYR-Auto]

You're Welcome!

[@rebeccaackels8892]

can the car be started (to warm it up) and this still works fine? for people who don’t have a spare key question

[@prettymuch142]

It worked thank you so much!

[@PYR-Auto]

You're welcome!

[@bossboxchevyog6900]

Didn’t work for me I put 5 digit code in it unlocked but when I pressed 1-2 but it didn’t respond to put new code in

[@Shottyrich23]

My used car at the dealership did not come with the car guide. What do I do now?

[@Nitrochic73]

I'm just now checking my owner's manual and when I bought my car was new it didn't come with a card inside with the number in it How do I locate one otherwise?

[@PYR-Auto]

you can see how to find the code in this video ruclips.net/video/nVai_jLwDuI/видео.html

[@ronaldhaugen5967]

I have a pad on my 2015 TAURUS INTERCEPTOR but it doesn't light up when touched ,can you help me with that ?😮

[@PYR-Auto]

not sure on that, sorry

[@skyschweitzer5342]

If the preview owners reset code can I still uE the permanent code

[@PYR-Auto]

The permanent code can not be erased

[@tchatchoh]

Thanks but the key fog should be in the car or out?

[@PYR-Auto]

it shouldn't matter either way

[@reybuenvenida383]

How about if you are 3rd owner of the vehicle the past pass code of owner before will automatically deleted?

[@bobbyjohnson2433]

We bought our car from my mother in law and have her code. We added our own but both now open the car.

[@bobbyjohnson2433]

But if you put in the factory code then press the 1-2 button, then hold the 1-2 button for a couple seconds it wipes all codes but the factory one and then you can add your own and you should be good to go.

[@MrScruffybird]

Can you disable the default code after you add new code?

[@PYR-Auto]

No - the permanent factory code cannot be deleted

[@user-sh7sh4ff5p]

I retrieved my factory 5 digit code from under the dash. I went to my key pad, followed the steps as stated in your video and others, and it still doesn't work. What is the trick??

[@PYR-Auto]

Are you sure you read the code correctly? If so, there may be an issue with keypad or vehicle itself as the permanent factory code cannot be deleted

[@pistolasguns7516]

It did not work

[@user-wo5xb2ud3n]

Mk4 ford Escape how to find a pin code?

[@sarkinyakinjabo7607]

Ford escape 2013...
Look carefully Beneath the glove compartment on the right side of fuse box.

[@debravowell8337]

I don't see the link down below

[@PYR-Auto]

its in the description box of the video but you can also find it here ruclips.net/video/nVai_jLwDuI/видео.html

[@HunterMarshall_60]

Where do you find the other code if you don’t have the card??

[@PYR-Auto]

you can find that video here ruclips.net/video/nVai_jLwDuI/видео.html

[@uNinkFaceArtistry]

What if I can't find my factory code.

[@PYR-Auto]

you can see how to find the code in this video ruclips.net/video/nVai_jLwDuI/видео.html

[@bigtruckdriver00000]

How do you get rid of the factory code???

[@PYR-Auto]

You can't

[@Joyfulminimalist]

Me finding my factory number pregnant, 😮‍💨😵‍💫😴