HP Elitebook 830 G7 Take Apart Complete Disassembly Teardown
HTML-код
- Опубликовано: 17 сен 2024
- Hi!
No music. No talking. Just work.
If you are taking your HP Elitebook 830 G7 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
Have fun and good luck!!
regazzz
It is not complete disassembly, you didn't remove the touchpad from the palmrest, and this was actually the thing I was looking to see.
I remove the track pad usually only if palmrest is damaged, therefore this one was still good. In some cases it is pretty easy to remove the touchpad, in others it could not be possible without breaking many things.
HELLO
Sir!!! What in the world are you using to get the screws out?? I have 1 screw that will not move and nothing fits inside that little screw head except a tiny flathead that hardly bites. I can get 4 of 5 screw out with it, but that 5th will not budge. Is this a Torx, hex, etc???? Thank you
Good morning could you please tell me at what minute I am removing this screw?
It could also be possible that it just stuck and would needs to be drilled out, but this is a worse case scenario.
@@regazzz Thanks for the reply. It is the back case screws...right in the first few seconds of the video. You are using a drill to get them out. I can't even pop the back off with that 1 stuck screw and I don't want to strip it out. Thanks !!!!