Yes, i agree i dont know it some setting with my obs when i record on my pc gonna fix the setting for next video's thanks for the feedback. could you mabye let me know if because of that you want some extra info about it ?
HEPA filter will filter out the particulate matter but not the fumes.You need an active charcoal filter for fumes. The best filter system would include both.
Just a thought, but the top lid still has a gap that circumvents the filter. You may want to modify that one corner piece to have a rise in it to fill the gap in the factory lid. That would give benefits to users printing with materials that would warp or give off noxious fumes.
Nice to hear there are a few nice ones i am planning like the belt tensioner for easy maintenance, but there will be many more sure you are gonna be happy with the k1 max 👌
im very excited, thanks for the reply. I had the CR-10 Smart and loved it with no issues, I still have my Ender 3 V2 Neo thoi. one of my favs so far@@Beppies3D
The Author of the riser for the lid said it was so the Bowden tube doesn't rub across the lid constantly. You clipped the Bowden down so does it have an actual purpose anymore? Would clipping the Bowden to the cable chain add extra kinks and therefore make the filament pressure vary from the extruder as it moves back and forth?
He printed all this stuff because it looks nice. There were no other causes. There are so much nesesary updates for this model, but we have what we have...
Dankje Beppie Mooi werk, Ik heb recent een Makerbot 5th gen die verstopt was op werk meegenomen. Ik ben verliefd geraakt op 3d printen. Zou de K1 Max een mooie upgrade zijn tegenover mijn oude Makerbot? Dezelfde gebruikersvriendelijkheid enzo.
Zo dat is old school, dat zou zeker een mooie upgrade zijn ik zou echter als ik zelf de keuze heb voor de bambu lab gaan p1p puur wegens de ams als je meerdere kleuren wilt printen, maar die heeft niet zon groote plaat als de k1max, dat is het enige wat ik mis met de k1 voor de rest echt een top ding wel aan het begin de extruder moeten vervangen maar dat had je bij de presale units
Pretty sure you completely killed the print cooler fan airflow by putting that super restrictive cover over it. Also, how does the exhaust fan have enough air input into the enclosure with the door seal? How are the inside temps and print quality with the same settings with those mods done? Did you have to modify settings for prints after the mods in order to get the same print quality?
Good question, actualy the fan airflow for the side duck is still the same because its a side fan en the openings are pretty big and they are sideway so mabye it looks that the airflow gets reduced by it i did;t change any settings on it still prints perfect at default speed, about the backfan its not complity airtight ofc but honnselty i have no idea i only close the lid when prining petg abs etc otherwise i keep the openings open
It's for keeping filament strings and dust from building up on the fan blades. Look inside a computer sometime. They are filthy after only a few months.
Not sure if it is your microphone or you kinda mumbling but it was hard to understand what you were saying
Yes, i agree i dont know it some setting with my obs when i record on my pc gonna fix the setting for next video's thanks for the feedback. could you mabye let me know if because of that you want some extra info about it ?
Its the dutch accent! 🤣
I would recommend turning the Subtitles on
HEPA filter will filter out the particulate matter but not the fumes.You need an active charcoal filter for fumes. The best filter system would include both.
Just a thought, but the top lid still has a gap that circumvents the filter. You may want to modify that one corner piece to have a rise in it to fill the gap in the factory lid. That would give benefits to users printing with materials that would warp or give off noxious fumes.
This video deserves more views and likes!!
Wow, cant belive that u guys watched my video love the brand and the printer thank you so much this gives me extra motivation
New subscriber here. Love the video. I hope to purchase my K1 max soon. I can't wait to see more upgrades for this printer
Nice to hear there are a few nice ones i am planning like the belt tensioner for easy maintenance, but there will be many more sure you are gonna be happy with the k1 max 👌
im very excited, thanks for the reply. I had the CR-10 Smart and loved it with no issues, I still have my Ender 3 V2 Neo thoi. one of my favs so far@@Beppies3D
The Author of the riser for the lid said it was so the Bowden tube doesn't rub across the lid constantly. You clipped the Bowden down so does it have an actual purpose anymore? Would clipping the Bowden to the cable chain add extra kinks and therefore make the filament pressure vary from the extruder as it moves back and forth?
He printed all this stuff because it looks nice. There were no other causes. There are so much nesesary updates for this model, but we have what we have...
You can put a light strip up there. The light that comes with the K1 doesn't cover the whole print area.
Great video!! thanks for sharing
Thank you
hello, there is an arrow sticker on filament sensor, should we remove this sticker?
I wouldn't. It's up to you for your machine. If you ever have to remove it, the sticker makes reassembly quicker if it can be mounted upside-down.
Dankje Beppie Mooi werk, Ik heb recent een Makerbot 5th gen die verstopt was op werk meegenomen. Ik ben verliefd geraakt op 3d printen. Zou de K1 Max een mooie upgrade zijn tegenover mijn oude Makerbot? Dezelfde gebruikersvriendelijkheid enzo.
Zo dat is old school, dat zou zeker een mooie upgrade zijn ik zou echter als ik zelf de keuze heb voor de bambu lab gaan p1p puur wegens de ams als je meerdere kleuren wilt printen, maar die heeft niet zon groote plaat als de k1max, dat is het enige wat ik mis met de k1 voor de rest echt een top ding wel aan het begin de extruder moeten vervangen maar dat had je bij de presale units
What's with the mumbling?
Great video, man!!! What speed did you use to print these models?
thanks, later today il make some screenshot and will respond with a link here on the comments and the filament i used
Pretty sure you completely killed the print cooler fan airflow by putting that super restrictive cover over it. Also, how does the exhaust fan have enough air input into the enclosure with the door seal?
How are the inside temps and print quality with the same settings with those mods done?
Did you have to modify settings for prints after the mods in order to get the same print quality?
Good question, actualy the fan airflow for the side duck is still the same because its a side fan en the openings are pretty big and they are sideway so mabye it looks that the airflow gets reduced by it i did;t change any settings on it still prints perfect at default speed, about the backfan its not complity airtight ofc but honnselty i have no idea i only close the lid when prining petg abs etc otherwise i keep the openings open
Hello , a riser for the k1 is good if i print PLA ? Thanks
it sould be fine unless you have a really high chamber temp since pla wil melt faster so if u aint printing a lot of abs petg etc u sould be fine
@@Beppies3D thanks
You can put a light strip up there and personalize the machine. I think the customized plates are neat.
What do the clips improve? Cause my filament cable is inside the black cable.
Less friction and wear as the carrier moves around.
@@jamesfowley4114 Oh, thx
nice
Nice video but you mumble a little too much, speak more clearly and keep up the good work, i am still waiting for my k1 max after almost 27 days :S
This is not an upgrades, this is a downgrades. WTF?
Why doesn't Creality provide these for buyers
Cost. Making them yourself to suit your wants and needs is a bit more fun, too.
@@jamesfowley4114 K2 Creality, sorry wrong link sent earlier
ruclips.net/video/Wfeog9IyedM/видео.htmlsi=U4lkci5OTnxN9oDB
The fan cover makes no sense at all.
It's for keeping filament strings and dust from building up on the fan blades. Look inside a computer sometime. They are filthy after only a few months.
This needs subtitles lol.
Thank you