Yeah i really like how they managed to squeeze so much into a really small form factor! Although have you seen the Kolink Stronghold? I just found it and had to buy it. It is in my video feed, check it out. It is a LOT of case for £35 ruclips.net/video/O_6RmNBkiyQ/видео.html&list=PL39HCM-SRLM9i9Jo6o7h4rZWuSS76yrOK&index=2
+Stewart Bapor just gently pull from the bottom and it will come off pretty easily. But be careful it is plastic and could break, if too much force is applied
Mike's unboxing, reviews and how to it it suprisingly acurate to the product photo ehen you order it. Its a really nice electric blue that matches the LEDS perfectly
Mike's unboxing, reviews and how to I just came across the part you talked about it in the video haha. Anyways thanks for the reply and well done on this review! Also are the cables adequitley long? The motherboard I have has its connectors in the top left and I don't know will the fan connector reach :/
you might struggle with the 3 pin connectors, but you could extend the molex to somewhere in the rear behind the motherboard? Or get some cheap 3 pin extenders from amazon just in case?
How do I plug a hdmi cable into my graphics card that is on the inside without taking of any of the panels, there seems to be no hole in the case large enough but there is these 2 flimsy bits near the back base of the case that if removed could possibly work but I dont want to break the case. Also do you any solutions for if the power button starts jamming.
@@mikesunboxing I got the case in prebuilt PC setup so the larger mother board blanking plate was removed while the lower ones (below the back fan) were not, thanks anyway but this is going bit of a pain with the mother board already installed
I just bought this case, in February 2023. It cost me 35 euros used, but it was still cheaper than most cases I could find, and it was delivered to my door by a guy who sells me a lot of used stuff. It seems to be in perfect condition, now I have to build a rig in it.
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
It is both of those things but at the same time is as good as the q300l from cooler master but for less money. Still worth while looking at and I would like to get another one in white with the black accents
2022 still a great case, just moved my Eldests battered tower (their pc built from preowned parts) popped in this case (purple version) and they love it. Makes the system look so much better. Is there a link to the system you built in this?
Thanks again! I got this case for my first ryzen build and got another one for my second! I love how lightweight it is - easy to transport from one house to another if you need to like I do :)
Hey great video, I know I'm late but I'm going to build a budget build with this case and I want to fit a PowerColor rx 570 red devil and it is a triple fan gpu and its 310mm long and the case is said to be able to hold a max of 315mm, should I risk it or should I get a smaller GPU, also this will be my first ever build
Rubbish case but what do you expect for £20. For the size of it they should of had support for one 5.25 also the plastic looks so cheap it's horrible. He mentions about good cable management not really that side has a bump in middle but still struggles to house all cables if you are not using module psu. Included fans are rubbish they glow thats about it (lots of reports about faulty fans, the same with faulty buttons) The case is very light because it's budget case they use very thin metal and once you remove all the plastic bits it's not that rigid anymore. I never understand why people would spend so much on other components but always go super cheap on a case for around £50 you can get really good cases.
+mon berg I agree with most of your comments, that's why I also have antec 900s and Corsair 750d. But budget builds are also a consideration so thought the review might help someone. I still use the case in a work pc and it works well for the needs of the system. So far everything still works including the cheapo card reader. But thanks for the comments.
Thank you someone understands the reviews were so good and I bought it and it’s horrific it took me two ho ur a to get the back side panel so you can guess how bad the cable management wad
I got the orange one it's a great cheap case
Yeah i really like how they managed to squeeze so much into a really small form factor! Although have you seen the Kolink Stronghold? I just found it and had to buy it. It is in my video feed, check it out. It is a LOT of case for £35 ruclips.net/video/O_6RmNBkiyQ/видео.html&list=PL39HCM-SRLM9i9Jo6o7h4rZWuSS76yrOK&index=2
Is there an hdmi port?
@@techtick4784 the graphics card has the hdmi
How did you take of the front panel, I want to add more fans at the front
+Stewart Bapor just gently pull from the bottom and it will come off pretty easily. But be careful it is plastic and could break, if too much force is applied
Just brought this case in blue very impressed would certainly recomend
+Ethan Tierney thanks for the comment, what is the blue like? Is it electric blue? It looks it from the pictures but what about in real life?
Mike's unboxing, reviews and how to it it suprisingly acurate to the product photo ehen you order it. Its a really nice electric blue that matches the LEDS perfectly
I would not recommended this case honestly people are too nice to this case it’s terrible
SynthGD I’ve had it for two years and of course a more expense case would have a few more features but for the price it has no flaws at all
Ethan Tierney ye for the price but honestly I would for anyone looking for a case save an extra ten and buy a bit better case
Front of the case have filters too? Or just the top and PSU?
+Wav-Scorn259 just the mesh on the front for filters. But they do quite a good job and is easy to wipe clean.
Hi will this case hold a standard motherboard?
If you mean ATX standard then no it won't, but it will take mini ATX and ITX
@@mikesunboxing micro ATX?
Does this case have Molex or 3 pin fan connectors?
+Bruh the supplied fans have both connections I used the 3 pin and then cut off the molex to tidy things up
+Bruh it has both just use whichever you prefer
Mike's unboxing, reviews and how to I just came across the part you talked about it in the video haha. Anyways thanks for the reply and well done on this review! Also are the cables adequitley long? The motherboard I have has its connectors in the top left and I don't know will the fan connector reach :/
you might struggle with the 3 pin connectors, but you could extend the molex to somewhere in the rear behind the motherboard? Or get some cheap 3 pin extenders from amazon just in case?
Thanks bro
Does the case come with an led hard drive indicator?
yes it does
Is it a mini case or a mid case??
mini case for micro atx
How do I plug a hdmi cable into my graphics card that is on the inside without taking of any of the panels, there seems to be no hole in the case large enough but there is these 2 flimsy bits near the back base of the case that if removed could possibly work but I dont want to break the case. Also do you any solutions for if the power button starts jamming.
You need to remove the metal blanking plates idealy before you install the motherboard to prevent any damages to the surface mounted chips etc
@@mikesunboxing I got the case in prebuilt PC setup so the larger mother board blanking plate was removed while the lower ones (below the back fan) were not, thanks anyway but this is going bit of a pain with the mother board already installed
Just wiggle the metal strips and you only need to bend them about 3-5 degree's and after a while they will break free easily
@@mikesunboxing thanks, do you think I will be able to take it back if I do that though, this is not a huge concern
Check with the seller but I would expect so.
How is the airflow on this case?
not too bad
I just bought this case, in February 2023. It cost me 35 euros used, but it was still cheaper than most cases I could find, and it was delivered to my door by a guy who sells me a lot of used stuff. It seems to be in perfect condition, now I have to build a rig in it.
i really liked this case in princible, might revisit it again on day to give a fresh take on it
can you fit a 1030 in there?
Yes no problem.
hey mike how are the temps on this thing. i get that its been a year so it fine if you dont reply
Surprisingly good actually even though it is small
@@mikesunboxing ahh I see. I've decided to go with aerocool aero one hundred mini because I'm worried about the 580 but thanks for the response :)
I love this case its visually stunning your review actually was very accurate
UnspeakableSamurai Thanks for the feedback!
So I have this case for my pc but I struggle to clean the front fan because of the metal in front of it could you help me and show how I can clean it
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
Do you think this is worth it? I am on a budget build and from some of the reviews it seems like a cheapo and brittle case
It is both of those things but at the same time is as good as the q300l from cooler master but for less money. Still worth while looking at and I would like to get another one in white with the black accents
2022 still a great case, just moved my Eldests battered tower (their pc built from preowned parts) popped in this case (purple version) and they love it. Makes the system look so much better. Is there a link to the system you built in this?
glad to hear you liked it. no link sorry. I can't even recall what i put in there 😂
can you turn the led fans off?
No sorry they are built in to the fans although you might be able to snip the wires on the leds as they are exposes
Do I need motherboard standoffs in this case
honestly cant remember if they were pre installed or not. But you do need to use them and they are included
Thanks again! I got this case for my first ryzen build and got another one for my second! I love how lightweight it is - easy to transport from one house to another if you need to like I do :)
Great to hear!
I know this might sound like a noob question but where would I lead out hdmi from motherboard on this case?
from the motherboard IO shield area
How many ram cards can this case fit? Also would I be able to fit a ddr4?
not sure i fully understand the question sorry
Ram is determined by what motherboard you have, and what platform you have
When ever I come across a cheap PC case, you've usually done a review of it 😁
we like a bargain here
does the side panel glow?
No I just shows the lights from the fans
How Do You Remove The Top Bit Of The Case , Where The USB Hub Is
there are a lot of screws and clips when i had it but the design might have changing a little now
Is it worth buying In 2022 ALSO my internet box is British television do you think that could handle it?😊
i don't understand much of what you are saying here. the case has nothing to do with the internet?
Do they have any usb at the back.
The rear usb are provided by the motherboard. Unless I am not understanding you correctly?
Mike's unboxing, reviews and how to thanks m8 .👍
No problem. Anything you need just ask
I’m really confused it says it’s a full pc on the internet
It is just a pc case in this review and this price
Does this supports/ can fit a rx 580 armor card?
Should be fine there is a lot of gpu room there
Hey - I know I'm really late but would anyone know how many watts the build in fans draw?
very few even under full load
@@mikesunboxing thanks man, didn't think you would reply to me - you've earned a subscriber😁
Thanks 🙏
Does this come with a psu ?
No sorry
@@mikesunboxing ok thanks anyway what psu should i get and the power cable as well ?
That would depend on the hardware you are planning to install really
@@mikesunboxing I'm using an Asus Prime a320m-k Micro motherboard, Ryzen 3 2200g, 1tb hdd and 8gb of ram and a amd cpu cooler fan
What motherboard is compatible with this and ram sticks and what cpu could I use instead of the i5 750
Any micro ATX motherboard will fit in this case
My local cex doesn’t have any of the pc components I need I might check out other areas
@@Asian200iq if you are shopping in the UK join in on our discord server cmcknight posts some amazing deals.
Mike's unboxing, reviews and how to ok I will join
Could u fit a rx580 in it
yes to can
How to remove the top panel?
Sorry I can't remember how it came off. I don't have the case anymore. Maybe someone else here can help?
Mike's unboxing, reviews and how to nvm bro already take it off
ColdBoltz how do u do it?
Would a 1050ti fit?
Easily. I had a Radeon hd7970 in there at one point. Loads of room for GPUs
@@mikesunboxing ok thanks
Fit an rx580??
yes easily
Love the older content.
Thanks for all the watching you've been doing, OutlawFett, we really appreciate it :-)
Can you put a b450 tomohawk in it
b450m yes not the atx version
Hey great video, I know I'm late but I'm going to build a budget build with this case and I want to fit a PowerColor rx 570 red devil and it is a triple fan gpu and its 310mm long and the case is said to be able to hold a max of 315mm, should I risk it or should I get a smaller GPU, also this will be my first ever build
oh that is close :-) i would maybe consider a smaller card. Sorry for the late reply
Hi everyone :) I am just confused on how to build this PC, as I am not familiar with it
it is reasonably straight forward but we have a discord chat if you need more help
@@mikesunboxing Ok thank you for the advice and help
@@discoverdrones9210 No problem :-)
How do i put cd's in
+Re4per x3 buy a external USB drive is the best way
Im getting this one when I review it i will put a link here
thanks and hope it goes well
Mike's unboxing, reviews and how to thanks :D
Mike's unboxing, reviews and how to i also have a question does the cit f3 support vga cables
Not sure I understand what you mean
Mike's unboxing, reviews and how to sorry i ment does it work with a vga cable
Nice video
Thanks for the feedback! Are you looking to buy this?
@@mikesunboxing I was going to not sure
It is pretty good for the money, but also consider the kolink stronghold and master box lite 3.1 depending on your preferences and build
2:00
Thanks 🙏
Support comment 🙂
Thanks William
You can hear every lip smack and breath, this is horrifying.
Your welcome 😍
Rubbish case but what do you expect for £20.
For the size of it they should of had support for one 5.25 also the plastic looks so cheap it's horrible.
He mentions about good cable management not really that side has a bump in middle but still struggles to house all cables if you are not using module psu.
Included fans are rubbish they glow thats about it (lots of reports about faulty fans, the same with faulty buttons)
The case is very light because it's budget case they use very thin metal and once you remove all the plastic bits it's not that rigid anymore.
I never understand why people would spend so much on other components but always go super cheap on a case for around £50 you can get really good cases.
+mon berg I agree with most of your comments, that's why I also have antec 900s and Corsair 750d. But budget builds are also a consideration so thought the review might help someone. I still use the case in a work pc and it works well for the needs of the system. So far everything still works including the cheapo card reader. But thanks for the comments.
I like the case
This is my opinion
Thank you someone understands the reviews were so good and I bought it and it’s horrific it took me two ho ur a to get the back side panel so you can guess how bad the cable management wad
Looking decidedly Slim there Mike.....
yeah was fitter and healthier then
@@mikesunboxing And you had a WAIST...!!!
@@makiwa lol!