I just received mine today. Did you shoot yours yet? And are you changing all springs? I did and the trigger feels amazing.. Just cant wait to shoot with my defensive ammo..
I received mine last Tuesday. Unfortunately, I have not been able to get in range time yet. Yes, I replaced all the springs and I must say it feels like butter. Not to mention I polished my plunger and trigger bar. I don't have a trigger gauge but it feels in the 3-pound range.
These work with Gen 4-5 mags without altering? Thank you your products are amazing and your one of the best shooters I’ve ever seen I’m taking the leap of faith on the G17 Gen 5 because of you I’ve heard great things just want to make sure all my awesome TTI gear works for the Gen 5s I hope to one day train with you and some of the greatest shooters around the world. Take care
At 1:10, you safety checked the gun by racking the slide with the magazine in, then you removed the magazine and assumed the gun was safe. What would have happened if there had been one round in the magazine before you racked the slide?
Getting complacent gets you hurt...no matter the sound or feel...not harping on the dude...I'm sure he'll make better decisions on gun safety in future videos...
Do your base pads help with the Gen5 front mag relief pinch? I have a great idea to help with this and keep ability to remove the mag during a malfunction.
The purpose is just to switch out the factory Glock pin so it is known that TTI did the custom trigger job. It's just part of the package. The Glock factory pins suck in my opinion anyway. They are plastic! I put the ZEV TECHNOLOGIES titanium pins on my Glock 21 Gen 4, just to have something stronger than plastic and of better quality.
Most factory glocks will handle overpressure loads with the factory spring fine, or just throw a .40 cal spring in it, it's not a terrible idea but it's not required
The springs work in weights. Factory weight for a 19 or 23 is 18lbs. I ordered 19lb and 20lb springs with a steel guide rod for a gen 3. I also ordered a heavier striker spring since I like using "bad" ammo which often have harder primers. Wolff springs if you are curious, but if you're answering my question you likely knew of Wolff already...
Conceptually think about it like this, if you had a 200 lb recoil spring all of the recoil would be transmitted straight to you instantly after the shot. If you have no recoil spring whatsoever, you wouldn't feel any recoil until the slide unlocked, travel rearward, and struck the impact abutment on the frame. The lock up of the slide and barrel have just as much to do with the impulse of the gun, probably even more, than the spring rate. In the original drawings of the 1911 the "recoil spring' was actually called the action spring. It's primary function is to strip off the next round from the mag and return the gun to battery. Recoil spring is kind of a misnomer.
What I dont understand is how the hell can Taran Tactical get Glock Gen5 or how can he use them if he's not LE and is in California ? On top of that if his customers are in California and are not LE how are they able to buy Gen5 Glocks if they're illegal for purchase by regukar civilians in California ?
Wow. Glad to know that. See I always thought that the tungsten guide rods were the way to go for recoil. Thanks alot!
Just purchased the TTI connector kit for my gen 5 g19. Can't wait to get it!
I just received mine today. Did you shoot yours yet? And are you changing all springs? I did and the trigger feels amazing.. Just cant wait to shoot with my defensive ammo..
I received mine last Tuesday. Unfortunately, I have not been able to get in range time yet. Yes, I replaced all the springs and I must say it feels like butter. Not to mention I polished my plunger and trigger bar. I don't have a trigger gauge but it feels in the 3-pound range.
Niceeeeeee.. I'm just praying it can handle 124g Hallow Points... And mine fell like c3-3.5 without the polish. So I can imagine how yours feel..
So how’s the tti kit working for your all’s gen 5? Wonder how it compares to apex trigger kit it’s definitely priced good the tti kit is
Got my base pads and my SSGR will be here tomorrow... Now just gotta order the trigger kit..
You guys need to make more accessories for the 43x and 48.
I need to move to America love your gun culture and 2nd amendment. Respect from Australia
I'm interested, just want to make sure I'm looking at the correct part as shown in this video. Is the SKU for this guide rod: GEN5-GGR-17-KIT
I want a Glock 21 slide from you guys. That 19 slide in this video . I can hear how smooth it is. Anyway big fan of yours .😎😎👍🇺🇸🇺🇸🇺🇸
Is this trigger kit recommended for carry/home defense gun that i shoot at the range also? I just have one Glock 19
These work with Gen 4-5 mags without altering? Thank you your products are amazing and your one of the best shooters I’ve ever seen I’m taking the leap of faith on the G17 Gen 5 because of you I’ve heard great things just want to make sure all my awesome TTI gear works for the Gen 5s I hope to one day train with you and some of the greatest shooters around the world. Take care
Any eta for the gen 4 large frame (45 & 10mm) magaell?
At 1:10, you safety checked the gun by racking the slide with the magazine in, then you removed the magazine and assumed the gun was safe. What would have happened if there had been one round in the magazine before you racked the slide?
I think what would have happened is a negligent discharge and instant memes with reaction videos.
This man is a legend I’m pretty sure he knows his way around a safe or hot gun lol but I get what you mean
This is a poor way to demonstrate how to check if a gun is safe. I would get yelled at if I did this in front of a range-master.
Getting complacent gets you hurt...no matter the sound or feel...not harping on the dude...I'm sure he'll make better decisions on gun safety in future videos...
Bla bla bla. 😴
Best in the game
Nice Butler !
Any updates to the Glock 34 gen 5?
Do your base pads help with the Gen5 front mag relief pinch? I have a great idea to help with this and keep ability to remove the mag during a malfunction.
Nice!!! Love your stuff, thank you!!!
What is the purpose of the stainless trigger pin? I cannot locate this info. Thanks
The purpose is just to switch out the factory Glock pin so it is known that TTI did the custom trigger job. It's just part of the package. The Glock factory pins suck in my opinion anyway. They are plastic! I put the ZEV TECHNOLOGIES titanium pins on my Glock 21
Gen 4, just to have something stronger than plastic and of better quality.
Very nice brother!!!!🇺🇸🇺🇸🇺🇸
I ordered one and have not shot with the SSGR.. How many lbs is the spring? It's not stated on the website like the the other ssgr
Got anything to cover or partially cover the finger cutout on the grip?
between one of my favorite gun channel and John Wick movies I went out and bought a glock 34 gen 5. anything coming out that ?
Will the Glock minus connector that works in all the other gen's work in the Gen 5?
We haven't tried.
The ghost will but you feel almost no difference
Great👍
How many weight of an ordinary glock guide rod?
How much for this package?
👍👍😎
Heavier guide rod spring does not equal softer recoil?
AKlover not necessarily, competition shooters don't shoot real hot ammo typically so a heavy spring that'll handle over pressure loads is unnecessary
For hot defensive loads in a carry gun a heavier spring is a good idea? 124gr Underwood +P+ with 19 or 20 pound spring specifically from a Glock 19.
Most factory glocks will handle overpressure loads with the factory spring fine, or just throw a .40 cal spring in it, it's not a terrible idea but it's not required
The springs work in weights. Factory weight for a 19 or 23 is 18lbs. I ordered 19lb and 20lb springs with a steel guide rod for a gen 3. I also ordered a heavier striker spring since I like using "bad" ammo which often have harder primers. Wolff springs if you are curious, but if you're answering my question you likely knew of Wolff already...
Conceptually think about it like this, if you had a 200 lb recoil spring all of the recoil would be transmitted straight to you instantly after the shot. If you have no recoil spring whatsoever, you wouldn't feel any recoil until the slide unlocked, travel rearward, and struck the impact abutment on the frame. The lock up of the slide and barrel have just as much to do with the impulse of the gun, probably even more, than the spring rate. In the original drawings of the 1911 the "recoil spring' was actually called the action spring. It's primary function is to strip off the next round from the mag and return the gun to battery. Recoil spring is kind of a misnomer.
never seen a 7lb glock trigger EVER..
Me either, maybe factory with a burr on it, but after some rounds, NEVER at 7#'s !
What I dont understand is how the hell can Taran Tactical get Glock Gen5 or how can he use them if he's not LE and is in California ? On top of that if his customers are in California and are not LE how are they able to buy Gen5 Glocks if they're illegal for purchase by regukar civilians in California ?
I love you. bye
Where is Jade ffs?
raceglock😂