How Rotavator are Manufacturerd in Factory from Scratch || How Rotary Tiller are made in a Factory
HTML-код
- Опубликовано: 26 дек 2022
- How Rotavator are Manufacturerd in Factory from Scratch || How Rotary Tiller are made in a Factory
#howtomakerotarytiller #rotavatormanufacturing #agricultureimplements Авто/Мото
You all have my greatest respect. No CAD, no laser, no robotic assembly, just honest hardworking men ..... something we in the west have lost.
Stay safe and keep posting these inspirational videos.
East Yorkshire, England. UK 🇬🇧
You also sad that they have children working full time in heavy machine shops? "Stay safe". You're funny.
Feel free to go work there if you think they are doing something better than in first world countries.
You Guys are AMAZING!
Excellent work, great job!
Keep up the GREAT WORK and VIDEOS!
สุดยอดฝีมือทุกขั้นตอน สร้างเอง
Всем доброго времени и здоровья как мне нравится как они работают не боясь нечего нет мер безопасности стонки дороботоны самодельными преспособом чюдса я восторге от этого мастерством молодцы ребята
என் ள
@@rangarajanb9304 ☝️☝️☝️
Настоящий сварщик должен быть в шлёпанцах !
Und keine Schutzbrille 😢
@@dirks.6789😊 knowing how ingenious these guys are, they're probably wearing auto- darkening, safety contact lenses
Все на ПК расчитано, а для незнаек видик класс.Театр в работе!!!
Койил гап йук кулларинг дард курмасин
ฝุ่นมากๆระวังสุขภาพด้วยครับ ขอชมฝีมือดีมากๆ
Real handmade by talented artist. Wish you milion dolars and kings live, because of your hard work!
Bravo! Pakistani machinists/ builders. Great job with limited resources. Thumbs! up.
Price point building.
ماشاء الله تبارك الرحمن
000000000@@Skidderoperator
Це шедеврально, особливо фарбування з проїзжаючими поруч мотоциклами
All of you guys did a great job congrats
Перед этим видео смотрел другое, подобное видео, где делали такой же аппарат, но в Корее. 😂
Я тоже смотрел . Насколько корейцы отстали в технологии и качестве !
At 09:44 the boy using electric torque wrench. This device spoiled the authentic atmosphere of the video.
Hard workers. Basic technology.
Respect from India.
All the best..😊
Made in Poland. Napierdalał młotkiem w łożysko. Gratulacje
Молодцы ребята 👍👍👍👍👍👍👍
МУСУЛМОНЛАР..ХАММА..НАРСАНИ..ИЛОЖИНИ..ТОПАДИ.БРАВО
와우 멋집니다. 당신들의 능력에 박수를 보냅니다
마지막 로터리날 조립시 기어박스가까이 있는날이 지면에 먼저 닿아야 합니다. 지금처럼 조립하면 금방 파손이 되어요
Tak tomu nemůže Evropa se svimi příkazy a nařízením konkurovat 😅🙂👍
Paskistan
Is the hard core......
They will work till the end of life......
Never give up.........
Lots of respect to you guys . As we say in the Caribbean, Done like ah BOSS 😎😎😎😎😎
punchab pakistan
قال رسول الإسلام :
إن الله يحب أحدكم إذا عمل عملا أتقنه .
Muy buen trabajo ❤
Great job 👏👍
Мы не работаем без шруповерт😮
Finally one of them knows to complete a weld instead of just spot welding a few spots
Much respect to all of the workers!!
😅😅😢😮😅😮😮😮 😮..😊😅😅😅😅😮😊😅
Молодцы делают канешно кустарно но зато из добротного метала делают 😊😊
Excelente trabajo, en ese mismo cuerpo le podre instalar cuchillas de martillo para usar como trituradora??? Agradecería su comentarios saludos desde chile 🇨🇱🇨🇱🇨🇱🇨🇱
Thanks for watching 🙌
Very impressive!
Great!!! Nice video!!👍👍👍
Incroyable mais vrai, ce sont des champions ces hommes !!!
OSHA would have a field day with this fabrication shop
Yeah, they would see a level of skill and resourcefulness that has pretty much disappeared in the west.
Excelente trabajo, pero lo más importante es el conocimiento que está absorbiendo el joven 👍🏽
..q. q. Q
ماشاءالله تبارك الرحمن عليكم عمل متقن ومحترف فعلا ❤
Where is the location!!! Please send me contact number
Watching video of making Rotary Tiller ( Rotavator ) from scratch . Very inspiring and great job. Useful and interesting proccess.Thank you for sharing. Good salary i think. Regards 🙏👍👌🍻🇮🇩
Я в шоке, такие молодцы!
If the bearing doesn't fit...get a bigger hammer😂
Mashallah,great work.
При покраске-главное,чтоб грузовик мимо не проехал в самы ответсвенный момент..но и так сойдет
Great great great hard work and motivated skilled workers.
Just a comment to replace the tooth gears by convenient belt and pulley system in order to protect the tractor gears and transmission parts from sudden shocks mainly when hitting unseen rock in the ground
Belts and pulleys wouldn't last a week! Why would you need them anyway, when the pto shaft to the tractor has a clutch built in it to protect the tractor and tiller drive line! SR
The guys work beautifully
If you’ve ever used a rotavator, you’ll know what a beating they take. They can’t break rocks but they’ll certainly try.
Hebat kawan 👍👍 bagus
not bad other then enjoying painting over rust or hammering on the bearings :O but nice job though
Excellent work 👍
nice videdo as always
Der erste pakistanische Mechaniker ohne Badeschlappen und mit Arbeitshose.
I love your country
at one time we taught our kids the craft of our families but no more
เก่งมากครับชอบครับ
Сейчас где то плачет инженер по охране труда..
Становятса очевидно , что эта должность совсем ненужна .
меня всегда радовала краска эротического цвета прям по ржавчине))) обоссали и красиво))))
Mashallah hardworking people
👌👌👍👍
Super rotavator
Rất tuyệt vời quá bạn rất tốt
Gold hend трудяги Respect
Kőkorszaki módon dolgoznak de nagyon jól
All good worker . But no calibration rotor not balancing, seal and bearing fixing wrong way
А когда идет дождь, все это просто намокает на улице и потом ржавеет ?
Да
Terveisiä naapuri maasta! Ainakin videoiden perusteella nämä tyypit osaavat tehdä kaikenlaista. Siksi ihmettelenkin että miksi heillä ei ole kunnollista hallia jossa tehdä töitä. Myöskään sandaalit eivät ole parhaat kengät metallitöihin, ja pitäisi olla turvakärki kengät, ja muutenkin asianmukaiset suojavarusteet. Heidät tilansa ovat erittäin alkeelliset.
Great !!! Greetings from Serbia (EU)
Gives new meaning to the term “homemade.”
Yall are amazing at what you do . I love your videos. I'd buy anything you make if I was in your country and needed it .
You do realized he stripped every bolt holding the ring gear on right?
Very good 😊
ماشاء الله تبارك الرحمن موفقين
можно просто было ставить угловой редуктор. без второй трубы.. которая пустая внутри. ну и привод просто можно от цепи сделать, без промежуточной шестерни
Цеп не надёжный
Wonderful
At least they mounted the bearings with shear bolts lol
Cuanta habilidad. Lo hacen ver tan facil pero veo que el personal sabe lo que hace.
😊😊😊😊😊
Good work I see it froma Tanzania
Good job keep it up 👍
Thích thật
A product that John Deere Dealership Loves.
Green colour and stickers plus CE signed
😊😊😊😊😊😊😊😊@@Dwa10.5
Good job
Maa Shaa Allah ❤
Very nice work
Молодчаги.
Quá đẹp
One hundred and fifty feet were sacrificed in the production of this video staring 👉 the flip flop mafia 😆 maybe a couple sets of balls as well🤣
nope they don't drink and don't get distracted
Good work
Those dry, rusty gears are sure going to last a long time!
They run in an oil bath, find another problem, gringo.
@@RH-ie2tx So where exactly in the video does it show anyone adding oil?
@@RH-ie2tx Oil would be added to the gearbox and the gear drive unit in the last stages maybe even after shipping over to the distributor. The problem would most likely be the tolerances between the gears as they were 'eye-precision' positioned and then the bearings had the gears torqued to 'yes please' newton metres. The welds actually look great compared to some of the Chinese implements I have. But this video explains the rusty gears and cogs in some of my units (not a tiller)
@@Agent24Electronics uleiul îl pune cumpărătorul îi face consumabilele
@@Antonio-od6tc Run them a while, then change the oil, end of problem! SR
SUPER
Well done.
Excellent
Для уровня механизации -- конец 19-- середина 20 века-- это Отличная работа.
Оно даже будет работать.
Основные недостатки--- посадки подшипников ,геометрия валов и флянцев , усадки от сварки ,плохая обработка от ржавчины.
Самый основной недостаток--- посадка подшипника кувалдой в отверстие плиты после резака. Это полная дикость. Впрочем ,также как и 50% остальных операций.
Надо снижать скорость сборки ,увеличивать квалификацию сотрудников ,обеспечить меры по охране труда( почти босые люди в резиновых тапочках ,без сварочных рукавиц и масок ,в халатах,в пыли и грязи на мостовой....старые станки....какая же там адекватность сборочного процесса???
Товарищ капиталист ,начальник данной организации ,вы больше похожи на рабовладельца ,чем на современного предпринимателя- менеджера....
Да ,и инженером- механиком вам бы очень не помешало обзавестись...для начала....
А потом и инженером-- технологом.....причем не теми ,что поголовно пили водку с утра и до вечера с девушками в общежитиях университетов бывшего СССР.....А потом они ехали нести прогресс к себе на Родину......----- вот мы и видим на видео этот " прогресс"...
No johan on verstas, työturvallisuudesta ei tietoakaan, mutta hienosti tehty kone 👍
Buen trabajo si , pero creo q no está bien del todo, esos engranajes deberían estar limpios y engrasados ,y no montarlos oxidados , y pregunta porque no poner calzado para proteger esos pies , un saludo desde España,
Esa manera de trabajar se hacía en mi pueblo cuando tenía 100 habitantes y hace 60 años ,hoy las cosas an cambiado y por supuesto para mejor ,la seguridad aquí no existe y la malloria de las cosas a ojete ,un saludo desde León España 🇪🇸
Very 👍 my freind
❤Nice
농사일이 쉽겠어요
Hay quá
Hy India,i am from Indonesian
Burası hangi ülke kolay gelsin
Хорошо
Ótimo trabalho
Good
Lindo trabalho mas vc tem que usar máscara respirador por causa do seu pulmão amigo
😮😮😮 wow