Thank you for the video. The paint brush was a hint that you were taking it apart to clean it. Now I’ll have to find out how to safely take the drone apart - unless you have advice/video on that (I will no doubt see a link in the notes once I post this comment, leading me to slap my forehead and call myself an idiot!).
In this case, the problem was that the symbol was full of junk. After basic cleaning, it is fine. If you have replaced with a new one, service calibration is required
. what is a symbol mean? And location. My dji air have water damage the fan was renplace and work fine now but the LED do not work and the 4 motor won; turn on i need help before i buy more part
Man I got the same problem the neck part of my gimbal broke and the two little arms that holds the gimbal with the rubber pieces it broke also but I fix it like new and the problem now is that my gimbal its acting the same as the video. So I'm going to buy the mini 3 and fix the 2 to sell it.
hi , my mavic air's gimbal is vibrating like a phone's vibration, you cannot see it but if you touch it you can feel the vibration and you can hear the sound too.Also its affecting the video too, the video is getting jelly like.Please help.
@@zigmephempo yea i gave it to a guy to repair it, he said one of the motor inside the gimbal had some dust or something inside it..he took apart the gimbal and cleaned it and stuff..then fixed it, calibrated it..Now it works.
Hi, I replace my gimbal after crash, but now, it's stuck in wrong position and i cant calibrate, stucck at 10% and said gimbal overloaded, do you have any idea ?
Man I got the same problem the neck part of the gimbal and the two little bottom arms the holds the cam with the two rubbers that holds, it broke and I glued it together and it's like new again but it won't calibrate like before so im going to get me a mini 3 pro until I fix it and sell it.
Thank you for the video. The paint brush was a hint that you were taking it apart to clean it. Now I’ll have to find out how to safely take the drone apart - unless you have advice/video on that (I will no doubt see a link in the notes once I post this comment, leading me to slap my forehead and call myself an idiot!).
Nice repair my friend,I have the same problem can you share what the problem was, thanks 🙏
In this case, the problem was that the gimbal was full of junk. After basic cleaning, it is fine.
Hi, great video...what it was the problem how do you fixed it?. Thanks for sharing
In this case, the problem was that the symbol was full of junk. After basic cleaning, it is fine.
If you have replaced with a new one, service calibration is required
@@djirepairservicebulgaria3506 thank bro for the answer
Hi where can I do service calibration thanks?
. what is a symbol mean? And location. My dji air have water damage the fan was renplace and work fine now but the LED do not work and the 4 motor won; turn on i need help before i buy more part
@@pavel1809 what error is written in the application dji go4?
Hi my mavic air gimbal starts shaking after few seconds into flight. Any solution?
Man I got the same problem the neck part of my gimbal broke and the two little arms that holds the gimbal with the rubber pieces it broke also but I fix it like new and the problem now is that my gimbal its acting the same as the video. So I'm going to buy the mini 3 and fix the 2 to sell it.
Disculpa.
El problema era de cardan o de los cables. Saludos
hi , my mavic air's gimbal is vibrating like a phone's vibration, you cannot see it but if you touch it you can feel the vibration and you can hear the sound too.Also its affecting the video too, the video is getting jelly like.Please help.
Bro did you get any solutions for this. I'm having the same issue. Please reply..
@@zigmephempo yea i gave it to a guy to repair it, he said one of the motor inside the gimbal had some dust or something inside it..he took apart the gimbal and cleaned it and stuff..then fixed it, calibrated it..Now it works.
@@haswi8625 thank bro. I'll try my luck now.
Hi,
I replace my gimbal after crash, but now, it's stuck in wrong position and i cant calibrate, stucck at 10% and said gimbal overloaded, do you have any idea ?
Man I got the same problem the neck part of the gimbal and the two little bottom arms the holds the cam with the two rubbers that holds, it broke and I glued it together and it's like new again but it won't calibrate like before so im going to get me a mini 3 pro until I fix it and sell it.
@@angelmanuelcamacho8690 you need to download a soft on your computer, plug in your drone.. And recalibrate it from your computer, it's easy to do..
@@angelmanuelcamacho8690 ruclips.net/video/rrdbJNnMeQ8/видео.html
I watched this video to help me..