2014 Ford Fusion 1.5L Alternator Installation

In this video I show installed a new alternator on my daughters 2014 Ford Fusion 1.5 liter engine.

[@Trancendentsolutions]

Skipped the part where and how many the bolts come out.

[@JGreen46]

Thank you sir very kind of you. You video was very informative thank you

[@Ibrahim-mf2si]

very helpful

[@chavo7426]

Where the 3rd bolt come from,bottom?

[@alexanderdavis5332]

Watched all this just to see how you got it in but of course it gets skipped

[@Whippon]

Seems that you put the belt going different side of the pulley instantly after the alternator main pulley/freewheel? (compare on time stamps 4:38 8:59 )

[@f119045]

You have a good eye my friend. I did not put that belt on according to the diagram I showed. The belt is now rolling the different side of the alternator's fixed pulley. She just drove it on 1500 mile trip with no issues. But I will give her a heads up if there is any squealing that could be the cause.

[@guerian84]

Mine just started to sound like that I thought it was just a pulley

[@David-qw2iv]

1.6 you mean ?

[@alexarce3315]

You had to remove both bolts to slide it up. No way you just moved the AC lines enough to get it out.

[@f119045]

That is true you remove two bolts, one on the top and one on the bottom. Remove one nut on the top then pull the alternator off the stud and through the AC lines. Sorry the video didn't record the actual removal of the alternator :(

[@doubleshadow2082]

I didn't think it was possible, loosen up the bolt holding both lines then pray and pull...

[@derrickfettig9160]

Just did this on my coworkers car. Didn't have to loosen the AC lines. Just had to rotate the alternator in the right spot and it came right out.

[@mariuszkurowski2280]

🇵🇱👍