Это видео недоступно.
Сожалеем об этом.
Koi fish cutting board / butcher block. Zieba board #3. Cnc inlay. Wood inlay 4k video.
HTML-код
- Опубликовано: 18 авг 2024
- The board size is 18*12*2 inch.
Michael Zieba:
www.ziebaknives...
How to find inlay parameters.
broinwood.com/...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/...
Check out our Instagram page / broinwood
broinwood.com/
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik.
Masterpiece! I would never put a knife on it though, rather to have it as a beautiful display. How ever, this gave me an idea how I want my front door!
''Beautiful'' no other word for that. Too beautiful to use, but you'd never get tired of looking at it and having it as a piece of art.
Thank you very much!
There's a better word than 'beautiful'. How about 'ridiculous'! No one else would even think of attempting this. This is the difference between a woodworker and a master.
"My First Cutting Board" 😁
I would never be able to let a knife come near it. Beautiful work.
Beautiful work! The ART is in having the vision to use technology in such a creative way. Thank you!
"The Art is in having the vision to use technology in such a creative way." Well said, as a designer who uses a C02 laser to cut wood is by no means taking an easy way out. Its the creations that are thought of with the use of our inventions. We have the tech and if we will evolve in our craft we must use tools. Heck if all is said to be true don't forget we supposedly used advanced alien tech to build some of our most beloved historical sites
I've always been a huge fan of woodworking, ever since I was a teenager. Well, I'm MANY, MANY years past that, but this machine makes the most amazing projects I've ever seen. I'm too scared to even LOOK at the price of one of them, since I know it will be well outside of my range of affordability, but admiring the work it produces is enough for me. Can't wait to see the other projects. The quality of craftsmanship it produces is unparalleled to anything I've ever seen before. Just incredible!
Отличная работа!!! Интересный и с моей точки зрения сложный перенос ресунка.Супер!!! 👍👍👍
Would be impossible to use as a cutting board...just absolutely too beautiful!!! I would gift it to someone to hang on their wall and I would get one for myself too. Stunning 😍🥰
once I watched this kind of work in Bali, fish side sculpted by hand in palisander. I still remember it after so many years. Hats off here as well we westerner have no time
This video is the work of the artist who directs technology. Congratulations.
To już nie jest zwykłe użycie CNC. To prawdziwy artyzm!!!
Gratuluję pomysłu, skoro opublikowany bez zastrzeżeń to metodę spróbuję skopiować. Pewnie poprzedzone to będzie wieloma wprawkami, ale wierzę że uda mi się. :)))
Simply Stunning. This is taking Cutting Board design to the next level. Brilliant!
Thank you!
Absolutely beautiful work. Not sure that I don't admire the amazing computer cutting technology more than the magnificent job that would have been fully hand crafted before the invention of such machines.
This is one of the most beautiful and creative cutting boards I have ever seen.
It's amazing what machines can do now. I used to make jewelry by hand now a 3d printer makes it. The death of craftsman ship.
I am so impressed by these works that I have decided to make one as a gift for a family member. No, I will not be copying the design, but I will be using the technique. I have done similar inlays but not with end grain and not using a tapered ball nose cutter. I am a hobbyist so I will not be selling these either.
Really outstanding work! Thank you for the inspiration.
I forgot to mention, the board I make will be used. End grain cutting boards last almost forever, they are nothing like face grain boards sold all over the place. The board will not be ruined by using it.
@@TReischl1 Did you make it? I don't see it in your channel? Also, what is the difference between end and face grain boards? How can you tell? (not a woodworker, thinking to get into it, maybe as a sideline).
@@ibubezi7685 long grain the grain will travel from left to right or top to bottom. face gain means it travels from bottom of cutting board to top.
@@TReischl1 Thanks for the recommendation! I didn't know that
@@ibubezi7685 Yup, got it made, after a few trials and tribulations, LOL. Biggest issue I had was attempting an inlay within an inlay. did not work at all. So I changed the design and it worked out well. I put very little of what I do on RUclips. Would end up spending more time posting vids than actually making things.
This is a very beautiful board. Whoever built the software is quite an artist...
I expected to see the design inlaid with resin. Which would have looked cool but this was a whole new level of impressive. Wow...
Who could ever use it as a cutting board? Amazing piece of art work.
Хороший станок. Человек в гараже наверное работает. Как говорится на коленке собрал. Да я завидую... Сам бьі поленился так пахать.
Спасибо
OMG Wow Wow Wow that is amazingly beautiful inlay thats something to hang up for display
One of my favourite cutting board on RUclips... Good job sir... your work make me speechless 🙏
One of the most grand things I have ever seen in my entire life
Why? The only thing he did is programming the CNC...
@@DriversFromHere the technology is also amazing
I was wondering why you were using a band saw over a table saw while cutting. What i figured is because its a smaller curf line on the band saw. Amazing work you do and i already told the wife im buying a board from you. Thank you for the awesome videos and workmanship. Keep it up
this is called the true creative mind, great job, I love it 👍👍👍👍
Thank you
😍😍😍🤤 I would like to do my kitchen countertops like this I’m in love 🥰 My entire tiny house is inspired mostly by Japanese culture
I love seeing you make the walnut base now.
Such fantastic workmanship!! It’s absolutely beautiful. It’s too gorgeous certainly to chop fish on!! Work of art!! 🙏🙏🙏
Holy shit!!! Bro! My jaw was dropped during that whole inlay process. You are seriously talented man. Great work!
Hats off to cnc... it did a great job!
Work of art! I appreciate the effort to make the inlay out of end grain also
Thanks a bunch!
That’s a work of art. One of the most beautiful cutting boards I’ve ever seen... thanks for sharing your amazing work. I don’t think I’d be able to cut anything on it though...
Thank you
Absolutely breathtaking
That inlay process was incredible.
Nice, that CNC machine is a skilled craftsman.
Zieba means beautiful and it is really beautiful.
Thank you
ابداع وتميز لإنتاج تحفة عاشت الايادي
Just fantastic! You are a Master with a capital letter!!! Good luck And good fortune!
if it's entirely made by a craftsman's hand without the help of a computerise machine it's a million dollars work of art, as it is maybe a three hundred dollars plus some.
I never knew it was one piece as an inlay. It is beautiful as ever so clever.
The most amazing cutting boards I've ever seen!!!
Дуже складна робота, але майстер зробив диво! Велика повага!
This is one of the most beautiful pieces i have ever seen! Well done! Thanks for sharing.
Next level woodworking
You are an artist in every sense of the word Sir!!
I love it but I could never bring myself to cut on it. Great work you are inspiring.
Чародеи ! Волшебники !!!
Amazing work! Pure art. I have seen similar work before in Beijing. Except the inlay was done in silver. Very nice ...
My goodness this is BEAUTIFUL!!!!
That is truly a piece of art!
Wow! Beautiful craftsmanship. If anyone put a scratch on it I’d go nuts 😱😂
Yes please, on my Christmas list.
AMAZING love watching this
that is just insanely awesome!
DUDE .. that is way to beautiful to use as a chopping/cutting board .. looks awesome!!
Instead of using it as a cutting board, I will use it as my pillow. It's way too beautifull.
That is just beautiful work! A real craftman at work!
Um dos trabalhos mais lindos que já vi. Parabéns.
after all, machine was the artist.
Very very beautiful work, amazing. From Pakistan.
thanks!
Работа просто супер👍👍👍
Спасибо!
Excellent work! God bless you and yours!
What a work of art and god given talent
That makes no sense. Stop giving a mans skill and credit away to your sky daddy
Thank you
😲 Вау 👍 . Маньяки древесные.
Beautiful craftsmanship I really like your art
From EGYPT
bravooooo
👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌
Very clever process and beautiful end result! Thank you for sharing this👍
Gorgeous!! I couldn't use it, only for kitchen display!!
정말 만드는 정성이 예술일세....👍🏻👍🏻👍🏻👍🏻
عمل أكثر من رائع جدا جدا تقنية غاية في الإتقان
WOW. I'm speechless. Amazing job.
Wow bagus banget 👍ketelitian tingkat tinggi... Saya suka.
A work of art. Beautiful!
Thank you!
Obviously your inlay work is terrific, but your video production is also excellent. I really want to try making one but I'm getting anxiety just thinking about making a basic one, let alone an intricate one like yours. Keep up the great work!
Thank you very much!
Beautiful, just beautiful.
Thanks!
Truly a Quality work of Art!!!
Wonderful !!!! this is too beautiful to be used.
Wow amazing. I like this art
Wow, that was some next-level stuff! Thumbs up!
Как хорошо все делают станки)
STUNNING!!!
I WOULD USE IT AS WALL ART. TOO NICE AS CUTTING BOARD.😉👍🥰
Now this what artists is, well done mate.
Good. 이런걸 우리 조상들은 그 옛날에 도자기에다 하셨으니 참 대단하신 분들.. 상감기법이라고 들어는 봤나
Spectacular beyond belief.
Hahaha cutting board, man I would hang this up in ky fish tank room as art, amazing build, skills, and ingenuity. Two thumbs up.
Wow! Very nice!
Wow! Fantastic!
these cnc routers are amazing, great project and design :)
I'm Very Impressed
you're THE BEST
Thank you!
This video makes you much more higher than cannabis !........ liked and subscribed.
Awesome work 👍. Think what you could do in the hifi world, making beautiful turntable plinth 🎶😀🎵.
I’ve only just found this channel these boards are amazing
Seu trabalho é muito lindo, algo de extremo valor. parabéns.
Fantástico maravilhoso estou extasiada com tanta beleza e perfeição parabéns .abraços de SP Brasil ..
Very nice idea and creative thought, keep it up and mesmerising us with you knowledge and tallent.
very professional work, and good equipment
my compliments
Complimenti è un capolavoro
Grande
This is such great craftsmanship too awesome to cut meat or fish on
Amazing work, beautiful
What a stunning piece of work ..... incredible well done a pleasure to watch