How to Replace Headlights 2007-2013 Acura MDX
HTML-код
- Опубликовано: 20 ноя 2022
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/19/f2/headlight-asse...
This video shows you how to install headlights on your 2007-2013 Acura MDX. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oaZb/1AXAA00013
• 10mm Socket 1aau.to/oaJx/1AXAA00017
• Trim Tool Set 1aau.to/oTr/1AXXX00006
• Ratchet 1aau.to/obdD/1AXAA00016
• Socket Extensions 1aau.to/oaZH/1AXAA00015
• Gloves 1aau.to/owN/1AXSS00048
• Safety Glasses 1aau.to/orp/1AXAA00343
• Pick 1aau.to/oDo/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Acura MDX 2nd Generation 2007-2013: • Acura MDX 2nd Generati...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
All that to access the headlight!!
All of this work to replace headlight bulb? What a joke!
Thats awesome instruction! easy to follow…
Wow!! Thank you for the detailed information. I am going to give it a shot! This was super helpful!
I used this video on replacing my own headlight bulb.
The screws right next to the wheels screw into these small tiny metal brackets that immediately fell off when I tried to screw them back in. Literally spent hours trying to hold the little metal bracket in place and the correct order of the plastic.
I love my Honda/Acura's but this is some otherworldly bassackward BS PIA design. I thought the Chrysler having to remove drivers side wheel to access battery was bad. Dear lord. Anyways, thanks for the vid.
Thanks for sharing your knowledge-how.
I just replaced passenger side aftermarket new and noticed moisture inside a couple days later. Seller advised me to uncover the vent in the rear of the headlamp. Is there a vent on the rear side and if so any idea of its location?
Great video
Absolutely ridiculous lol just doing this on my wifeys car. Great design.
Thank u brotha 🙏
Good video. However, those lenses could have been restored to looking brand new. The OEM parts are always better than any aftermarket ones. Always try to stay with OEM parts, unless it's an old, cheap vehicle.
QUESTIONABLE ACCURACY:
Specifically RE: "2nd Generation" 2012 MDX… There are less difficult methods that don’t require bumper removal.
Finding a different vid is my suggestion, IF YOUR MDX IS A 2012 (this MAY be a perfect vid for other year models)
Your video does show and is great but you need to correct your description OF REMOVING YOUR RETANING CLIP! Push the way you say IS A JOKE! Tell people to SQUEEZE THE RETAINER CLIP! It doesn't just pop off like you show. Please show that both need to be squeezed together to release it.
Good grief, this guy seemed like he was winging it as he went rather than knowing what he was doing. "Oh, and now there is another wire. And look at that, a cable. and a connector"...ect. Grade F