This is the Perfect Projector( Epson CO-FH02)

Social Accounts:
instagram: / eaglestudio. .
Twitter: / eaglegamer14
Thread: www.threads.ne...
Thank you for watching Please Like and Subscribe for more videos and Comment down below for what you want to see next. Hope you all have a great day, Bye.

[@verschepard]

I got a lot of projectors in my life, but for "me" the 3lcd technology is the best of all. Ok, for the bedroom or on the go a dlp is also fine and nice, but In my livingroom there is only the place for a Epson!!!!

[@fikukalakuka6601]

Hi, I have a question, only 1 HDMI, so I won't be able to keep the android TV dongle plugged, while connecting another HDMI like a laptop? will I have to unplug the dongle every time? (not convenient when it is ceiling mounted) Thanks!

[@ADMGG]

I did reply to your first comment and still said you might have to get a splitter for the Epson CO-FH02 Projector

[@_Archos]

Hello there! I had a question: Is it possible to connect a soundbar via HDMI connection to this projector? Since it has only 1 HDMI port and another USB (and these are intended exclusively for the dongle/SmartTV stick, I didn't know how to do it). At the moment I have my soundbar connected to this projector via Bluetooth but I notice a certain small "delay" with the characters' lips when I watch movies and I would like to avoid this using an HDMI connection (if possible of course...). Thanks in advance and great Review!!

[@ADMGG]

I unfortunately am not sure if it is possible but I’m sure there could be a setting to fix the delay

[@_Archos]

@@ADMGG Thanks for the prompt response! I'll try to take a look at the sound settings to see if it's possible to fix that small delay.

[@pokerbmx1]

Did you'll figure it out how to remove the delay or how to connect via cable the sound pls?

[@_Archos]

@@pokerbmx1 Hi there! I gave up on trying to find a way to connect my soundbar via HDMI since there's only 1 HDMI slot and it's already in use by the SmartTV stick. Instead, this happened to me:
After 1 week trying to connect 2 devices to a single HDMI port, I decided to try watching a movie on the projector through my mobile phone (for example through the Netflix app). . . since apart from the delay problem, I had another problem which was that I had a fairly low maximum volume level with the Bluetooth connection of my soundbar. After doing this test of watching something through the mobile, somehow the maximum volume level that my sound bar supports was suddenly unlocked (which was a relief for me).
After doing this, I realized that the projector controller had some additional options: if you press the "sound control" button (the button with a gear pattern), you get 2 modes called "AUDIO SYNC, NIGHT MODE" and "VOICE ENCHANCE", and turned both on (at least I had these options with my soundbar; try to find something similar with yours).
In short, after having streamed a movie with my phone and having activated those 2 modes with the remote, both the volume and delay problems were solved, or at least I barely notice the delay now.

[@thebatmannow861]

do you happen to know if the bulb is replacable? ive seen where some epsoms are not

[@ADMGG]

I unfortunately not sure and I don’t really see anyway to really change it due to its design and build

[@mrjohncrumpton]

The bulb isn't replaceable.

[@thiagogonzagathiagogonzaga6800]

​@@mrjohncrumptonpoxa, sério ? Tava querendo ele, assim fica complicado

[@sebastian_moralesh]

Obviamente las bombillas son reemplazables, tienes que comunicarte con EPSON para proceder a ello

[@Channel567-7]

Even worse no air filter to clean, could get blocked and overheat. It runs very warm as it is. I like pic image, but this is a throw away projector after maybe 4000 hrs, don’t rely on quoted hours.

[@biramartini4634]

Is it possible to change the bulb on the Epson FH02?

[@ADMGG]

Not that I am aware of no

[@pokerbmx1]

Hi can you conect sound with this projector with cable and Bluetooth if yes how pls?

[@ADMGG]

You can only if you are using something like a Apple TV or a device that can connect with Bluetooth

[@pokerbmx1]

Oh ok and what about direct with cable for netflix,youtube or laptop streaming?

[@ADMGG]

That is what I meant you can’t do it direct to the projector only with other devices

[@aleksaleksl699]

And not one reviewer will say that on this line of Epson CO FH 01,CO FH 02,CO-W01 and other new generation projectors, the lamps cannot be replaced in principle, that is, if the lamp fails, we throw out the projector!!!!!!!All reviewers are silent and carry an advertising blizzard!!!!!

[@ADMGG]

Well I comment on people that ask about it and I do respond to them