Die Werkbank ist schon sehenswert und wie er die Sterne herstellt ist sehr schön anzusehen 👏👏 Wie filigran die Sterne am Ende sind , einfach wunderbar 🤩👍👍
Great video. I loved your table. I loved that you glued your stars to a block before sawing them. (I was wondering how you were going to do that.) And I loved your stars. Great video. Thank you.
Great project. Before you glue anything if you coat the wood with Sanding Sealer the glue will not stain the wood and makes it easier to sand and look awesome. Thanks for the demo.
Very cool - thank you for sharing. Question: what is the advantage to not having your stop-guide across the entire fence? Is it a kickback thing? Going to try this :)
Goodnight! I would like to know if possible the degree of the saw machine is the thickness of the wood, would it be possible for you to send it would you like to do it?
I think someone with woodworking knowledge could easily figure out these angles. But even if you can’t, they’re snowflakes, which means you can’t really mess them up. Experiment.
He is using 6 pieces to make them. 360 degrees in a circle, which is what they end up as. There are 6 joints. 360 divided by 6 equals 60. So each joint is 60 degrees. Divide 60 degrees by 2 equals 30 degree angles. 360 divided by 30 equals 12, which if you multiply the 6 pieces by the 2 cuts for each, you end up with 12 30 degree cuts that equal 360 degrees total. 6 would be the right number of pieces, but you can use a different amount. If you decided to use 12, then you would divide 360 by 12 and get 30 degrees for each piece, divided by 2 would be 15 degree cuts on each side of the pieces.
Дааа... Я не верил, когда мне говорили, что некоторые за границей обладают мышлением младенца, которому всё надо объяснить. Оказывается, это правда... Люди, вы что, не знаете элементарной геометрии? 😮
I don’t need any wooden snowflakes, but I do see this method as a viable way to make your own wooden knobs.
That is absolutely the most, “F your prices, I’ll build it myself” table saw I’ve ever seen.
Fabuloso. 👏👏👏👍🇵🇪
Die Werkbank ist schon sehenswert und wie er die Sterne herstellt ist sehr schön anzusehen 👏👏 Wie filigran die Sterne am Ende sind , einfach wunderbar 🤩👍👍
أحبك يامعلم❤👍👍👍👍👍👍👍👍👍
Only one word: OUTSTANDING
Great video. I loved your table. I loved that you glued your stars to a block before sawing them. (I was wondering how you were going to do that.) And I loved your stars. Great video. Thank you.
@Mr.H Woodworking this is very clever! I'm definitely going to attempt this! Thanks for the ideas!
Great project. Before you glue anything if you coat the wood with Sanding Sealer the glue will not stain the wood and makes it easier to sand and look awesome. Thanks for the demo.
Muito trabalhoso…, mas vale cada pozinho da madeira, PARABÉNS, adorei…, que todos tenhamos um santo natal…, todos.
Abraço aqui do Brasil 🇧🇷
Excellent work, CONGRATULATIONS...!!! Thank you very much for sharing.
Greetings from Uruguay...!!! PS: Excuse my Google-English...!!!
Thank you so much!
Very good idea.
awesome thx for posting
man, I want to ask permission to do this for me too
Is amazing...
Oh my gosh how pretty
Sensational !
Nice work and great procedure Im sure whomever gets them will like them very much. Do you have any plans for sale. Thank you for sharing
ابدع
Faioskie ozdobne gwiazdki do dekoracji fajnego wzoru i rozmaitego kształtu
Trabalho perfeito
Parabéns
Outstanding!!
Thanks!
How much days does it take?
Maaf saya terlambat melihat video anda👍
Beautiful. What was the angle of the table saw please?
Super robota✌️🤓pozdrawiam
Are you just gluing up the edges with CA glue?
Bonjour, et merci beaucoup pour cette vidéo. question: tu utilise quoi comme colle pour assembler les morceau 👏👍
Those are really nice
Thank you!
Do you have plans available for the Christmas ornaments on your video?
very goood....👌
Thanks!
What’s the make or type of glue you use please?
CA wood glue
Can you Share Details to get it done myself ? I am From India.
Matt I cannot get the paint to stick to the snowflakes could use a little help thank bill
Very cool - thank you for sharing. Question: what is the advantage to not having your stop-guide across the entire fence? Is it a kickback thing? Going to try this :)
Yes it's to help prevent kick back. Never use your fence and miter together
¿Cuál es la medida del ángulo de corte?
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
what is the degree on the first cut
Maybe that’s his booger nail… (deep reach style)
Nice Coke nail
danke schon
What is with the pinky nail?
Most of the time a single long pinky nail is used to snort cocaine. Seriously, but not saying that is why this guy has it.
This whole setup screams “eventual catastrophic kickback” to me. I’d hate for him to get a star kicked back at his face like a shuriken.
little talking on your cutting would went long ways.
WTF is up with that long pinky finger nail???
cocaine.
That’s his coke finger, you saw how fast he was moving!! 😂
He’s a Starsky and Hutch fan, that’s how the wanna be gangsters did it back in the 70’s.
Now it can't be unseen!
Peruvian Pixie Dust! :P
Is bladde set on 45 degree
It should be set at 30 degrees
what is the angel???
Quelle colle utilisez vous ?
J'utilise une colle à base d'eau, qui sèche rapidement en 10-15 secondes au contact
Merci d'avoir regardé!
@@MrHWoodworking vous pourriez me préciser la marque ou m'envoyer un lien où je peux l'acheter ?
Merci 🤗
Goodnight!
I would like to know if possible the degree of the saw machine is the thickness of the wood, would it be possible for you to send it would you like to do it?
Sorry I don't understand what you mean.
Thank you for watching!
@@MrHWoodworking I think he was talking about the angle the pieces were cut, or ''blade angle''. 30 degrees
What Type of glue?
It's a fast-adhesive water-based glue, which in my country is called 502 glue.
Thank you for watching!
This is an almost exact copy of another youtube video out there.
Yes, and the other one tells you angles, sizes, etc. And makes suggestions.
Yes, Steve Ramsey ( Woodworking for Mere Mortals ) about 9 or 10 years ago. This is a poor copy of his video.
whats the point in making a youtube video of these beautiful stars if you don't explain anything ,as to angle of cuts etc.
I think it's self explanatory. At least experienced wood worker comprehend it.
I think someone with woodworking knowledge could easily figure out these angles. But even if you can’t, they’re snowflakes, which means you can’t really mess them up. Experiment.
They look like consecutive 45s
He is using 6 pieces to make them. 360 degrees in a circle, which is what they end up as. There are 6 joints. 360 divided by 6 equals 60. So each joint is 60 degrees. Divide 60 degrees by 2 equals 30 degree angles. 360 divided by 30 equals 12, which if you multiply the 6 pieces by the 2 cuts for each, you end up with 12 30 degree cuts that equal 360 degrees total. 6 would be the right number of pieces, but you can use a different amount. If you decided to use 12, then you would divide 360 by 12 and get 30 degrees for each piece, divided by 2 would be 15 degree cuts on each side of the pieces.
Дааа... Я не верил, когда мне говорили, что некоторые за границей обладают мышлением младенца, которому всё надо объяснить. Оказывается, это правда... Люди, вы что, не знаете элементарной геометрии? 😮
Answer please!