KLX110L - BBR U-Flow Install
HTML-код
- Опубликовано: 6 сен 2024
- Installation of the BBR U-Flow air filter kit on a 2019 Kawasaki KLX110L.
Purchase: www.bbrmotorspo...
FOLLOW ME
INSTAGRAM - @PROJECT_KLX110
~ BIKE ~
2019 Kawasaki KLX110L
- FMF Factory 4.1
- Two Brothers Tall Seat
- Pro Circuit Top Triple Clamp
- BBR Stiff Fork Springs
- BBR U-Flow
- BBR Chain Guide
- DNM 350lb 290mm Rear Shock
- Diamond Minis Skid Plate
- Diamond Minis Sprocket Cover
- Pro Taper XR50 Bars
- TRC Peg Cradle
- DRC 50mm Wide Foot Pegs
- Hammerhead Shifter
- Sikk 110s Rear Brake Pedal
- Renthal Half Waffle Grips
Film/Edit - Harrison Gartaganis
~Music~
Track: Chris Hayes Music - Chill Trap Beat No Copyright Trap
Music provided by NoCopyrightMultimedia
Watch: • Chris Hayes Music - Ch...
Free Download / ♪ Stream: audiograb.com/...
Track: EME BEATS - YANG FREE TRAP BEAT No Copyright Trap
Music provided by NoCopyrightMultimedia
Watch: • EME BEATS - "YANG" FRE...
Great job on this, the video really saved me some headache and frustration when I installed mine last night. Thanks!
ayoooo mate!!! im back! here we are, a year or two later from the last time we talked when i was telling how thankful i was for your videos and how much they helped me...and take a wild guess why im back and what im doing....installing this filter lol. was going good until i read on the instructions to cut off the choke guard...wanted to see someone do it and where they cut it and thank god your channel popped up! I knew right away there wouldn't be any bullshit, talking about this, talking about that just straight to the point and showing and explaining everything! P.S. glad i watched ya cause its 12:34am here right now and I wasn't to hyped about firing up a sawzall or grinder..neighbors and wife probably wouldn't have been to stoked lol....but then again its me and it wouldn't surprise anyone, haha! Cheers brotha and thanks again!!!!
...welp...the hack saw blade i have is gonna take me 3-5 business days to cut through this with fucking dull it is!! Sorry neighbors and wife, sawzall it is at 1am lol!! wonder whats gonna be louder...the sawzall cutting metal, or the air compressor cleaning everything off!!! LMAO
Waaayy bad ass! I love this option over the other little pancake filters w/o the outerwears! Much better option! Thanks man. Perfect 👌🏼 vid! Brraaaapp
Thanks for all the tips! you da man
Not that damn many things must put it in plastic too, huh?
I’m using the same jetting and everything and I’m running to lean
Have you had problems getting dirt inside the u-flow while the bike is running? I've seen a few complaints about this.
Any jetting changes when you put the pipe on? Do you know what your carb settings are?? I know you used a 100 main, what about pilot and air screw?? Thanks
Would I just put the pipe on I didn’t change the jetting. The stock jetting was 88main and 40 pilot. In the video I was running a 100 main and 40 pilot. I have now changed to a 42 pilot. Rans a lot better
What jets you running? I have pro circuit t6 exhaust with uni filter and it bogs about mid throttle when I’m just cruising, it’s a 2021 klx 110L
Can you add a link for the filter cover please I tried lookin for it
Try a 100 main and a 42 pilot
Where did you get this filter cover? Can you drop the link please my uflow gets here monday
The jets are included? How do you know if its running rich or lean afterwards.
I’d like to know which jets too
Does the front fender rub on the plastic u flow part? Looks like everything is tight fit, is your bike completely stock? Beside exhaust asking bc my klx110L is stock and was wondering if your getting worked 1st try. Looks bad ass and sounds sooo good !
Great video! What size is the handlebar is that you have on your bike? Looks sweet. Thanks!
Pitbike Mods is that the 8” protaper pad on your handlebars? Thanks for the reply!
Hey bro did u say u had to move your choke back? It kinda looks like it blocks the gas and choke levers
What elevation do you live at that you’re running a 100main jet? I live at sea level and hoping a 100 main will work for my bike
@@pitbikemods1623 Thanks for the reply man, I installed it today and noticed the carb is making a different sound, is that normal? Not sure if it’s just the sounds of more air and a bigger jet? Thanks again for the video would have never tried to install and rejet it myself without your video.
@@pitbikemods1623 Thanks for the reassurance, I was ready to rip everything off again!😂 Then I thought to myself there’s no way I did something wrong. Your the man, thanks again for all the help!
@@Ryzone what was the answer?his reply was missing . I’m at sea level as well and mine is running very lean after the install.
Is it easy enough to take off and clean without having to remove the plastic shroud?
Yea that’s what I meant. Just the air filter for typical cleaning. In stock form it’s a major pain with plastics and seat removal. Thx.
What size Outerwears cover did you get for your UNI filter?
This guy doesn’t answer bro. Lol.
Great job thanks!!
Where are you?
at 1:54 what is that little lcd display for?
It’s an aftermarket hour meter. It also shows rpm’s and service intervals