Micro Scale Bell 206 - What's Inside - RC ERA C138 Helicopter
HTML-код
- Опубликовано: 7 фев 2025
- Micro Bell 206: shorturl.at/L5npx
Coupon code: BG61975b
Eurocopter EC135 Scale Helicopter: shorturl.at/syEIs
Airbus H145 Scale Helicopter: shorturl.at/5pgV3
EACHINE E120 Bo-105 Helicopter: shorturl.at/P2Oto
Eachine E120S 3D Helicopter: shorturl.at/cKhvV
RC ERA C189 MD500 Hughes: www.banggood.c...
Eurocopter EC135 (Modster/Eachine/F06): shorturl.at/eALNT
Goosky S1 Legend RC Helicopter: rb.gy/kfrl4
Radiomaster TX 16S: bit.ly/2ZKxTeF
Goosky S2 Legend Helicopter: bit.ly/3Jgama7
FLYWING FW450 V2 Helicopter: www.banggood.c...
FLYWING FW450 V3 Helicopter: www.banggood.c...
RC Hoonitruck Car: www.banggood.c...
RC Drift Car: www.banggood.c...
Eachine EC35 RTR Flameline 1/14 2.4G 4WD 30km/h RC Car Drift LED Lights w/ Gyro Full Proportional Vehicles Models: www.banggood.c...
FLYWING FW450 V2 Helicopter: www.banggood.c...
FLY WING Bell 206 Helicopter: bit.ly/3rqR2Nq
Eachine E160 Mini Helicopter: bit.ly/2XIaF7a
XK K100 3D Helicopter: bit.ly/38piSDh
Eachine E130 Helicopter: bit.ly/2U2du0F
ALZRC FAST X360 3D Helicopter: bit.ly/36raBxH
XK K130 Helicopter: bit.ly/37DgHfe
XK K110 Helicopter: bit.ly/3i5szZJ
XK K123 AS350 Scale RC Helicopter: bit.ly/30FnXmA
EUROCOPTER EC145: bit.ly/34F5VSj
#rc #helicopter #radio #flight #new #rchelicopter #scalemodel #rc #helicopter #rcera #andrejsturm
Micro Bell 206: shorturl.at/L5npx
Coupon code: BG61975b
Interesting stuff. Beautifully shot and edited… thanks Andrej!
Thank you for very this nice made and edited video, Andrej! I see a lot of plastic parts. But Okay for this very good price and so few dollars no one can expect more! You are a great editor. I never have seen such a estetic autopsy!!
Thank you Matthias, I appreciate it.
This helicopter is incredible, considering the price.
Hello, this little helicopter is well designed and flies very well. I asked on their site to make the HUEY UH1 version, they replied “thank you for your suggestion” ;-)
Does it have any alerant sponsor at all?
I can't wait to see the AH-1 Cobra, which is shown in black silhouette on the back of the box the heli comes in. There's more silhouettes also, one looks like an V-22 Osprey.
This company definitely knows how to make products that are irresistible to scale model enthusiasts!😅
Although they have a nice scale appearance, the different models don't seem to scale with each other unfortunately.
Kind of wish that they made all of their helis at a set scale, so they look more realistic (together) when sitting on the display shelf.
Still though, it's amazing how cool these are.
I could only dream of having such a nice RC heli when I was a kid!😅
Finger's crossed
@mickmuzzmkmz1628 Agreed, it's all thanks to the new brushed coreless motors being so very light and powerful .
Good operation
well done! This heli has the best flight performance considering this price range> THe previous version , 4 blades mini heli, has too much slop in the control. This version has metal swashplate center that makes control solid have a 450 class
AUTOPSY 😂
This might be my next purchase 👍💯
Good choice!
good video
Awesomeness ❤😮
Tolles Video für eventuelle Reparaturen..
Das Innenleben des neuen era c190 wäre mal interessant
I've had mine open already, as after some crash 'testing' (OK I crashed it, like a lot) it developed a hideous shake, once it started shaking the the electronics picked up the shake and magnified it, in like a feedback loop type thing, after a second or 2 the thing was uncontrollable and would keep gaining altitude until it was smashing against the ceiling. I had setup a kill switch, I'm flying it with a TX16X radio, so I set the kill switch to the 1 and only momentary switch. I opened it up to see if I could see what was happening, which I couldn't. I ordered the optical flow board separately, so I needed to open it again to fit the board. Fitting the OF board was a total PIA, because the wires on the board were so short, and I had to try a few different routes to get it to work, and then trying to get the OF board to line up with the slots in the body was a nightmare. It took me altogether too long to get all the plastic pegs to align. The thing I noticed the 2nd time I put it back together, was some of the threads for the screws in the plastic body had became stripped, also I had lost a few screws, as some of them won't come out completely so I guess I must have dropped some when I was working on it. Luckily I had some self tapping strews of the correct size, so I used those. The funny thing is, the optical flow, seems to have calmed down the shaking, so don't know if I'm imagining that, or if it actually did help. Anyway, it's a great model, especially for the price. It's only 4Ch, but the swashplate does have 3 servos, so it has pitch, it's just that pitch and throttle are tied together.
Maybe the main shaft is not straight anymore, so it may be helpful to replace it with a new one ...
I thought its main motor is brushless, I was wrong! Thank you my friend
Looks like it would be easy to replace the brushed main motor at some point in the future.
Yes, you are right.
I removed the cable cutter and the front antenna because i find it looks better without
I love to fly with this little bird . The only issue is the battery, they flight time is short😢
Yes, the flight time on this helicopter is relatively short, compared to other RC ERA helicopters.
Dancing swashplate😂
Hello Andrej, as always, a great video from you. I also bought the helicopter and would like to fly it to my Radiomaster Zorro 4in1. My question to you is, which protocol do I have to use?
Thanks and keep up the good work
Horst
Hi, thank you.
The right protocol is E129, sub protocol C186. If you can't find it these two protocols in your radio, you have to update the firmware on your multi protocol module to the latest one (I had to do that on my TX16S).
@@AndrejSturmThanks for the quick reply. I'll have to do an update for the Zorro because I can't find the subprotocol C186.
Regards
Horst
Hello !
I sadly broke the Rotor Head (small plastic piece in T form)
Do u know how i can get the same piece in stronger material like Iron ?
I found only plastic pieces..
Thanks for this nice video
Good video Andrej. What is the size of the screwdriver to take the main body apart.
This is a very nice " take-apart" video, thank you for your work! Question: I have two identical 206's. One performs well, the other barely can put in hovering. Both with 3 batteries tested, both new from the package. Both sound equally. The one with the nearly zero-hover capability also is nearly unstoppable when "landed". Do you have an idea what reason? Pitch of the blades look the same on both helis. Could it be the headspeed- setup?
Which receiver protocol?
Great Video! After first flight I noticed not much power from motor. After landing the main rotor will not spin any longer. Most likely I burned to main motor already as everything else seem to work fine. Any suggestions? Anyone else had this happen?
Can you assist me? On what frequency does this helicopter and controller work on?
... Does it have any type of aileron control at all on the right stick Or is the right stick connected to the rudder only? Can you do a tornado maneuver
Is there any reason i cant take the optical flow from this heli and put it on the c189? Since the optical flow for the c189 is junk? Or is it the flight controller thats the issue on the c189?
This helicopter has a common propeller pitch. It has three servos. Can this helicopter do flips? or inverted flight?
They could've put 3d mode but choose not to for some reason
Only a gay ass flip no 3D😂😂😂
How much flight time do you get out of this heli? I get 7 - 8 mins until autolanding. I chedked battery volatage and it was 7,4 - 7,5 V. That should be enough for another several mins of flight. Mine also has different flight controller.
Boa tarde
Difícil trazer a bateria do helicóptero para o Brasil.
Será que é possível substituir a bateria.
Abraço
I replaced my C138 old problematic receiver board to the latest upgrade available for only $14. I show how, check it out.....................🚁
Greetings. Have you determined whether the grips have ball bearings (great!) or solid bushings (not so great)? I had one of these on pre-order for months only to have my order cancelled.
Hi, unfortunately I was not able to disassemble the rotor head as the screws were too difficult to unscrew (strong loctite). You can't go wrong with this helicopter as it's such a good value model.
Can you help me !! Mine almost take my hand off and my cat head ! it turns on without binding or turning on the controller !!!(insane ) never had something like this happening in a drone or chopter !!!!! and it only rotate the back rotor when i push the take off button !!! Because after turning on the rc chopter i can turn the controller and binding but it never goes down !!! it something in the flight controller ??? because both motors are working !
Hi, Which version of the TX 16S do you use to fly? FCC or EU LBT? and 4 in 1? Thanks
@@remotecontrolledmedia 4in1
why are some versions without a flow sensor?
I think it's good to have options, so you can choose when buying ... if you buy it without the optical flow it's a little cheaper.
@@AndrejSturm I ordered with an optical flow and came without it, tell me is there any sense from the optical flow or not?
The seller has made a bad job in your case. I can't tell you how that sensor works on this particular helicopter as at this moment I only own this helicopter without the optical flow sensor. But I have a new C138 PRO version coming, I think that that one will come with the optical flow sensor, so I will be able to answer your question then.
@@AndrejSturm I bought no optical flow version,it is possible if i buy optical flow module and put it in? and i can see some different between your received and mine
How did you set up the TX16s and what protocol did you use?
thank you