I just wanted to know if I wanted this tool... But there are no list of tools anywhere So, at 3:19 I found - 7 tools: Ruler, flathead screwdriver, phone stand, pen, tweezers, pin, SD or key card tray
Great work. It would be cool if you turn it into a wallet instead of something that goes in a wallet. Add a place for cards and a money clip for cash and it would be perfect in my opinion
I've recently started designing tools for 3D printing in Tinkercad and discovered how difficult things can get and how many failed prototypes it takes before you get a working model. well done! I'm thoroughly impressed!
Looks very professional. I have had your "china metal tool card" upgrade card in my wallet for some time and filled the bit holder section with some fire tools as I had infil problems printing the fire card. Excited to give this a try, looks great although more complex. Might swap the blade with a swiss card clone one. Between this, the fire card and a customized version of another coin holder card wallet carry should be a lot more organized. Might even customize further for a dedicated space for the vic nail clippers that are always in there anyways. By the way I got another set of scale tools by simply removing them before sending my vic compact in for overhaul. Cost less than 10€ and I got it back with a new set of everything 🤫
I had the phone case version of one of these (scissors, tweezers, red AND blue pens, toothpick/reset button presser, phillips and flathead mini screwdrivers, phone stand). I really missed having it around when I upgraded to a different phone, and now that I know you can just buy the replacement parts... I might finally 3D print myself a phone case version of this, instead of a wallet version...
Depends on where you are and who you roll with. Most people around Colorado don’t notice or don’t care about a folding knife of any size. But one person in Boulder freaked out over a Benchmade mini (under 3” blade) that’s the smallest thing in my drawer. Sounds like Chris is on a university campus so people there might be more sensitive than most.
I used to carry a swiss card in my wallet too but I kept breaking them by sitting on them and it just got too expensive to keep replacing them so then I went to a swiss army knife and now I carry a Leatherman.
2:12 what style book binding is that? It looks like a composition, but it's remarkably resilient to being folded open. (which seems like it'd be the baseline for a notebook but, well, don't blame me I didn't design them)
Anyone know where I can buy the Victorinox card he shows in the video? The newer ones in translucent plastic just look so weak but I can't find this version anywhere.
ok can someone tell me what the fuck is a sd card gonna do on a multitool it cant be for cameras you arent gonna have 128-256gbs of photos on a camera and if its for video then youd have all the other shit with you that is cumbersome enough you can fit loads of micro sd cards in it so whats it for and why isnt it just in the pockets you dont use in your wallet if you actually need it
Multitools are about being prepared, I can recount probably a dozen times where someone im with has had to go out and buy a card while out for various reasons. more generally having a full sized- micro sd adaptor on hand is useful to go between different cameras.
E-bikes in the states are probably not the biggest risk for people's safety. There road infrastructure and car fleet of giant vehicles comparable to a tank is probably the biggest risk for bike riders and pedestrians.😬
apart from the cool knife placement the rest are about as useless as it gets for normal everyday use. who uses the pin, crappy tweezers and need to carry sd card on your average normal days ? you should design one that carries REAL everyday tools + bonus if it can also be a wallet would be a great plus !
I just wanted to know if I wanted this tool... But there are no list of tools anywhere
So, at 3:19 I found - 7 tools: Ruler, flathead screwdriver, phone stand, pen, tweezers, pin, SD or key card tray
I would suggest some sort of safety lock for the knife, as it could easily come out... pointy end first, when pulling it out of your pocket.
That being said, this is an awesome idea!
Great work. It would be cool if you turn it into a wallet instead of something that goes in a wallet. Add a place for cards and a money clip for cash and it would be perfect in my opinion
This
@@waralo191 I'm thinking of doing this... it's gonna need some serious rework tho to handle the extra load
I like the idea. My only problem is i only use wallets with rfid blocking. How would one add that to a custom wallet?
its crazy how cinematic your videos are now
Wow this is so cool. I am thinking about having this with two cards and MagSafe compatibility. This would be my perfect thing.
I've recently started designing tools for 3D printing in Tinkercad and discovered how difficult things can get and how many failed prototypes it takes before you get a working model. well done! I'm thoroughly impressed!
Looks very professional.
I have had your "china metal tool card" upgrade card in my wallet for some time and filled the bit holder section with some fire tools as I had infil problems printing the fire card. Excited to give this a try, looks great although more complex. Might swap the blade with a swiss card clone one. Between this, the fire card and a customized version of another coin holder card wallet carry should be a lot more organized. Might even customize further for a dedicated space for the vic nail clippers that are always in there anyways.
By the way I got another set of scale tools by simply removing them before sending my vic compact in for overhaul. Cost less than 10€ and I got it back with a new set of everything 🤫
1:51 Hey man, you should be proud of the stuff you put out - even if you outgrow it. Great build!
At 3:41 I paused and looked over straight at the cheapo card tool on my desk that hasn't ever been used. Good to know I can use it for something!
Staple coffee mugs in the background was a really nice idea 👍
I wish victorinox asked you to innovate some their lineup. You are really talented!
I had the phone case version of one of these (scissors, tweezers, red AND blue pens, toothpick/reset button presser, phillips and flathead mini screwdrivers, phone stand).
I really missed having it around when I upgraded to a different phone, and now that I know you can just buy the replacement parts... I might finally 3D print myself a phone case version of this, instead of a wallet version...
0:25
I use my folding knife regulary without drawing attention, for opening boxes/packages and opening pomegranates.
Depends on where you are and who you roll with. Most people around Colorado don’t notice or don’t care about a folding knife of any size. But one person in Boulder freaked out over a Benchmade mini (under 3” blade) that’s the smallest thing in my drawer. Sounds like Chris is on a university campus so people there might be more sensitive than most.
just so you know: you did an amazing job !!
This is rad. I have a printer but it's not set up yet. This would be a fun project to ad
Bro this is more underrated then pineapple on pizza! Keep it up dude! God Bless!
I could see printing the top in white. Spray painting it in black then hitting it with a lazor engraver to apply any design
Cool design!
My Swiss Card has been in each wallet ive had since 2001, and have also never used the nail file
nice vid, you might be able to put an airtag in the logo area... that's the first thing I thought of anyway. keep it up!
I used to carry a swiss card in my wallet too but I kept breaking them by sitting on them and it just got too expensive to keep replacing them so then I went to a swiss army knife and now I carry a Leatherman.
2:12 what style book binding is that? It looks like a composition, but it's remarkably resilient to being folded open. (which seems like it'd be the baseline for a notebook but, well, don't blame me I didn't design them)
This is amazing.
You take it too far, Scooby. (Te la re vivís Scooby.) LOVE IT.
AMAZING WORK!
that's a really nice idea!
Pretty cool!
Really cool!
I wonder if you could make one with a 5c series yubikey slot instead of sd card
nice design
who else saw the five mugs ...
Is there any chance you would be able to release the cad files so we can modify these more easily?
I cant find the updated design on your thingiverse page? Am I looking at the wrong place?
Its up now, forgot last night
0:40 My father had one of those!
Do you know if the m1.6 x 4mm screws will work? I can only find 4mm and 5mm long screws to order in the CONUS
sorry for late response, yes 4 should work you wont really lose much strength. 5 would stick out the bottom by half a mm.
What CAD do you use? Or which one would you recommend?
Anyone know where I can buy the Victorinox card he shows in the video? The newer ones in translucent plastic just look so weak but I can't find this version anywhere.
I want to buy it. How can I?
can we carry multi tools on airplanes?
There are actually tsa approved multi tools
熱意は認めるが先人を越えてないという評価。少なくともレザーマンクラッシクツールよりも有用だと言って欲しい。
ok can someone tell me what the fuck is a sd card gonna do on a multitool it cant be for cameras you arent gonna have 128-256gbs of photos on a camera and if its for video then youd have all the other shit with you that is cumbersome enough you can fit loads of micro sd cards in it so whats it for and why isnt it just in the pockets you dont use in your wallet if you actually need it
Multitools are about being prepared, I can recount probably a dozen times where someone im with has had to go out and buy a card while out for various reasons. more generally having a full sized- micro sd adaptor on hand is useful to go between different cameras.
E-bikes in the states are probably not the biggest risk for people's safety. There road infrastructure and car fleet of giant vehicles comparable to a tank is probably the biggest risk for bike riders and pedestrians.😬
Sound is not so good either. About 3x too quiet. Looks like a great project otherwise.
Sound is OK for me!
Yeah I think I need a new mic, this one seems to get quieter each recording. It is 10 years old to be fair aha
Вауу
Promo`SM 🎉
apart from the cool knife placement the rest are about as useless as it gets for normal everyday use.
who uses the pin, crappy tweezers and need to carry sd card on your average normal days ?
you should design one that carries REAL everyday tools + bonus if it can also be a wallet would be a great plus !