Quite a beautiful job!! As someone who can duplicate the work I have to say that you really took your time and thought the whole thing out!! I have framed, trimmed, and drywalled but I just cannot say how impressed that I am at your level of work!! Many props to you, sir!!
What a talented and amazing guy. I been watching and learning your vertical grow beds and now how to make dome ceiling. Thank you Don for your great videos.
Excellent video showing just how much care, attention and experience goes into these beautiful ceilings. I wonder if you could put the marks on the wood before you ship them, making the kit even easier to assemble. You could even include full-size paper patterns for the drywall. Would help homeowners like me, who might not be able to find professional drywall people who can do a good enough job. The patterns remind me of how the Medieval churches were marked out on the ground floor of the structure. Fabulous.
I have no experience at doing these--- this was a one time thing for me. I don't make kits, but I'm sure there are kits out there. Contact them, maybe they are a lot easier than what I went thru. I'm sure mine was a lot cheaper, but Mine took a good while to complete! Thank you for your comments my friend---Don
Just a correction on which side to wet. When wetting drywall you must only wet the inside curve only on the outside curve as the wetting the outside will weaken the out side paper and when you bend the dry wall it will split the outside paper and ens up cracking the sheet. Wetting the inside curve allows the plaster on the inside beneath the paper crush down while the out side paper stays strong and resists tearing and cracking. after the dry wall has been fixed into the new position the water will evaporate out and the crushed plaster on the inside curve will semi reset to the new position.
Must say great sheet rocking but make sure to off set the screws when making a dome they shouldn't be alliances causes to much stress to the wood but excellent video
This is really custom "tailoring" and sculpture by a most experienced craftsman and artist. Wish I could find someone around here to do this work. Do you have people to recommend in North Carolina?
Is there a different more flexible material that could be used instead of drywall? Perhaps even large sheets of something similar to fiberglass or even the auto-body spatula material, cut to shape.
The problem with the work he did was that he didn't tape it so give it a few weeks when the house moves his ceiling will start cracking I do this for a living and I've seen many of these mistakes happen you always have to tape the joints and the cracks,
Tanta pinche medida para nada ....asi no c base se mide lo ancho y los dos largos de abajo ansia arriba y queda bien tanto pinche pedo le quedó todo abierto no sab e este compa ....no fucking godo sorru
Quite a beautiful job!! As someone who can duplicate the work I have to say that you really took your time and thought the whole thing out!! I have framed, trimmed, and drywalled but I just cannot say how impressed that I am at your level of work!! Many props to you, sir!!
+RevtosTV Thank you my friend---Don
You are a very good teacher. That initself is a rare talent.
What a talented and amazing guy. I been watching and learning your vertical grow beds and now how to make dome ceiling. Thank you Don for your great videos.
Thank you for the great review---Don
Quick question, how many hour did you spend from start to pre-paint to build this dome? Amazing work, thank you for sharing?
All I can say is WOW, you are one of those people that can work magic with drywall sheets!
+Making SawDust Thank you my friend---Don
Another great video Mr. Porta, Thank you.
Great video. Thanks for putting this out there!
Awesome job. You've just inspired me to do that in my house. ty.
You can do it!
Thank you for this very informative and in depth video.
Great work 👏🏾 ❤️🔥
Excellent video showing just how much care, attention and experience goes into these beautiful ceilings. I wonder if you could put the marks on the wood before you ship them, making the kit even easier to assemble. You could even include full-size paper patterns for the drywall. Would help homeowners like me, who might not be able to find professional drywall people who can do a good enough job. The patterns remind me of how the Medieval churches were marked out on the ground floor of the structure. Fabulous.
Can't wait to install some of your gorgeous arches and ceilings! I have waited my entire life to do this and live in a "Medieval Cloister" of my own!
I have no experience at doing these--- this was a one time thing for me. I don't make kits, but I'm sure there are kits out there. Contact them, maybe they are a lot easier than what I went thru. I'm sure mine was a lot cheaper, but Mine took a good while to complete! Thank you for your comments my friend---Don
Сосиски в тесте
Ок да да
i sheetrock alot never done a dome ceiling pretty cool stuff and i do love to tape custom stuff
Great video. Thank you for sharing. Very beautiful job. Thank you
Thank you very much!
Beautiful in many ways... Thank you!
Full of good information. Thank you!
Thanks for sharing it is good experience to watch.
I am learning something.
Ty Do
vetasenlamadera
I like the fibre tape. Better than paper tape.
Just a correction on which side to wet. When wetting drywall you must only wet the inside curve only on the outside curve as the wetting the outside will weaken the out side paper and when you bend the dry wall it will split the outside paper and ens up cracking the sheet. Wetting the inside curve allows the plaster on the inside beneath the paper crush down while the out side paper stays strong and resists tearing and cracking. after the dry wall has been fixed into the new position the water will evaporate out and the crushed plaster on the inside curve will semi reset to the new position.
that is very useful information, Thank you my friend---Don
boa tarde
você e d+++++++++++++
se fosse no brasil iria fazer um curso com você
você e um gênio
Good job Brother !
Very nice
Must say great sheet rocking but make sure to off set the screws when making a dome they shouldn't be alliances causes to much stress to the wood but excellent video
15:29 omg thats so beautiful
Thank you!
if you rub fiberglass insulation on the sheet rock it helps it bend. sounds like a joke but I've seen it done.
+Doc Bartley Thanks for the tip my friend---Don
damn good job thumbs and ten toes up
Great job
Beautiful
Thank you! Cheers!
This is really custom "tailoring" and sculpture by a most experienced craftsman and artist. Wish I could find someone around here to do this work. Do you have people to recommend in North Carolina?
Is there a different more flexible material that could be used instead of drywall? Perhaps even large sheets of something similar to fiberglass or even the auto-body spatula material, cut to shape.
My daughter could paint it! She is in Raleigh.
The problem with the work he did was that he didn't tape it so give it a few weeks when the house moves his ceiling will start cracking I do this for a living and I've seen many of these mistakes happen you always have to tape the joints and the cracks,
Didn't you watch the video? He does tape it
I thought he did tape it.
Wow nice!
Goodyat jobyat very finyat
Real mudders only use tape, not mesh. At least that's what they've been showing on youtube.
Ditto the 2 comments below.
Q: why do you double up on the 1/4 inch drywall ? Is one layer susceptible to cracking ?
qual o material que você usa para vedar?
e gesso?
А все таки доделал😄😄👍
how you do custom molding ? Thanks.....nice
Hes fast
👍👍👍💯
Excellent
Have you ever tried to build one in the shop and deliver it?
I have not, but I know there are kits out there that can be bought and assembled.
What are those spatulas called ? To look for them on Amazon please
Bondo Plastic Spreaders, there is a link with description of the video
Nice
Thanks
abdulhafeez
Маш Алла
Ok!norm😉
Yinzer
Переведите пажалуста
Tanta pinche medida para nada ....asi no c base se mide lo ancho y los dos largos de abajo ansia arriba y queda bien tanto pinche pedo le quedó todo abierto no sab e este compa ....no fucking godo sorru
aprenda primero achirokiar para subir bidehos
mariana buruca y vos aprende a escribir antes de comentar.
You are the Don of the Dome :)
i sheetrock alot never done a dome ceiling pretty cool stuff and i do love to tape custom stuff
i sheetrock alot never done a dome ceiling pretty cool stuff and i do love to tape custom stuff