Am I seeing this right? $6k for the EG360, 15HP, 1800LB track loader and comparing it to a $25k+, 25HP, 2800LB track loader? This isn't a tractor, but this is farming views. LOL
I have one of those Chinese loaders, the only difference is mine has a barrel behind my bucket where I can load rock, mulch, dirt, whatever. Mine is only 10hp and it works incredibly well! I can lift 4 to 5 hundred pounds of rock really easily, and the barrel will hold well over 1000 pounds. I think the issue is what you are trying to us it for. They dig into dirt really well and if the ground is a bit wet, it will dig into the ground really well. I have accidently dug a huge rut into the ground with mine, just trying to pick up a pile of rock. It was slow, but I think you guys should have spent a bit more time with it.
Honestly you’ll be impressed how much that can do check fluids I think it needs some hydraulic oil or turn up the pressure I can pick up 3 foot logs with mine 1 to 2 feet thick
I bought one of these and a dump bucket type to clean livestock pens these are amazing and get into tight areas paid $2200 total plus fees at auction in ordered 3 more dump units for other horse owners who loved mine
The auction place near me sells a lot of these new for around $3K and they seem to be much faster and stronger than the one you got. I think they are branded as AGM. Difference in manufacturers or maybe a problem with the one you got. Check fluids and adjustments, that may be the problem.
Brad, why is so important to you to razz your dad so much for just trying to save a few bucks? I love watching you two but damn, cut the guy some slack. We're not all as smart as you.
360 vs 1000 is not a direct comparison. Dingo makes a smaller version that would be comparable. I have a 360 I use to power and pull around a vibratory plow. The thing works great and will fit through narrow gates and in small spaces.
I got a compact tractor and it won't even do that with grass I would say the bucket is not right for it anytime I've took out grass I've always used a tiller on the back of my tractor and then scoop it out with the bucket I don't think it's a bad machine and the other machine you went and got looks a lot heavier and a lot better built and it has the bucket for digging
Change ALL the fluids right away and replace with good oil. tighten the bolts. they are slow. ya can throw tracks n the track drive bearings may go. as far as digging... ya need a toothed bucket. they are decent for what they are.
The maximum amount you can buy is $1000. If you want to buy a Chinese product that can be used normally, such as Wilbert's machine, you need to buy a product for at least $5000. Generally speaking, buying a product for $10000 is very reliable. You can use the average price of your $20000 machine as a budget to purchase similar products from China. The last sentence is, don't be greedy for cheap things.
MY POST LOTTO DREAM involves ''investing'' into a hydrolic/machine shop that ends up making a new pump/diverter valve sets that make them overseas el cheepo loader thingies, MUCH much better ....
I have an agt industrial mini excavator from China it walked slow, but I turned up the pump, and that booger will dig some holes. So you may have to turn up the pump pressure, so it will dig
There using one of the smallest units they have probably 13hp. They have a twin 22hp and I've seem some are made in china with a kubota and/ or perkins diesel.
Everybody sees them and contemplates buying one to try, these and the tiny excavators.....Happy he put in the money and work to test out the theory 🤣. Really name brand units are pretty stout 👍😁
Brilliant Tractor, my boss bought a real cheap 25 hp Chinese tractor it was made from Mickey Mouse steel it lasted a year with a break down every week, its in the uk. ..
I had the same problem the first time i used a log loader, I was thinking this thing is slow and weak. Then one of the regular operators told me to idle it up and i was suddenly like superman on caffeine loading logs.
There has to be a way to speed that up...its in crawl mode...like for babies! Im sure it has a man switch somewhere...then change all the valves, reinforce all the steel with 3/16" plate, powdercoat ...then maybe the motor needs a big bore kit and whammo...its good to go! I will buy it! Its a great project semi-dingo! lol
Did you guys check any of the fluids, as China tends to send a lot of these things dry or very low after testing them. If you didn't check, you might have destroyed it.
Thing is about those chinavator and loader so many differences between them some are ok some are horrible. Watched video guy had one hated it bought another one different manufacturer worked great for him. But when i bought my u10 kubota looked at chinavator first im in it for the long haul not 5 minutes
Palm trees will freeze bc they are mostly just strings of roots, so water just sits everywhere. I was looking at that alibaba tractor for a few days and I'm glad I seen your video to not purchase one. They make it look so damn good on the commercial. But China does have only some good tractors but larger ones.
This little tractors made for one thing and one thing only, mucking out stalls, cleaning up the turds, moving. gravel. It's not made for long distance travel. It's one thing and one thing only for three grand what a deal
Usually it's the other way around, the son is trying to justify his quirky online purchases to his dad.. and force the dad to like it and jump the bandwagon 🤣
You bought the wrong one. This isn't how most of the China imported mini skid loaders work. Most are faster, have large number of attachments, and work very well. That bucket you have doesn't have a cutting edge on it. Add a cutting edge and for really hard earth bucket teeth.
That machine would have worked with a little time invested, I have watched videos on a bunch of those Chinese machines and they all work after a little tinkering. Like if you would have sharpened the cutting edge and stuff like that.
I think to a homeowner that's got like 5 acres and has an acre garden or two acres garden. It might work just fine. But in a hands of a professional you really need professional equipment to get the job done efficiently to make your money
Brad doesn't know the difference between a tractor and a skid steer.....and he's laughing? 😂
On what planet is that a tractor?
Welp ŵhen your last name is DUH BERTI IT KINDA MAKES SENSE RIGHT?
Thats what Californians call em
@@ricksmith4736
A- that’s dumb
B- their not from California
🤣🤣
Earth
I love you guys so much!!!! Every video makes me miss my Dad but getting to share so much laughter with y'all is a blessing!!
Your Dad is patient man ... I woulda kicked your ass for laughing ... lol
For sure!
Your f..king childish laughing and keep saying i'm right..... I told you...I told you.....
That thing must be defective. Because I've used that same machine. It was fast and had power.Maybe the hydro system was low on fluid.
that's what I too was thinkin, that thing MUST be in LIMP MODE cuz of something not setup to ''end user mode'' :) OR SOME THING :)
I wonder if they did a single stage pump so it'll never do high psi, but yeah something is definitely not as intended
Am I seeing this right? $6k for the EG360, 15HP, 1800LB track loader and comparing it to a $25k+, 25HP, 2800LB track loader? This isn't a tractor, but this is farming views. LOL
Mmmmm, painful listening to the boy 😮
It goes faster. Recheck the fluids...
That bucket is not designed for digging
that is called a Transfer bucket, for, transferring materials, they work fine
I have one of those Chinese loaders, the only difference is mine has a barrel behind my bucket where I can load rock, mulch, dirt, whatever. Mine is only 10hp and it works incredibly well! I can lift 4 to 5 hundred pounds of rock really easily, and the barrel will hold well over 1000 pounds. I think the issue is what you are trying to us it for. They dig into dirt really well and if the ground is a bit wet, it will dig into the ground really well. I have accidently dug a huge rut into the ground with mine, just trying to pick up a pile of rock. It was slow, but I think you guys should have spent a bit more time with it.
Believe it or not those things work pretty damn good!!!
That thing was slow as tim Conway in the carol burnett show when he played the oldman😂
Well, did you all do the "after shipment" prep on the machine? Change all the fluids, check and lube all zirks, etc?
Sure didn't see that.
Honestly you’ll be impressed how much that can do check fluids I think it needs some hydraulic oil or turn up the pressure I can pick up 3 foot logs with mine 1 to 2 feet thick
Ya i thought the same thing it low on something and its set to low it cant be right .should be able to do much better than that
I bought one of these and a dump bucket type to clean livestock pens these are amazing and get into tight areas paid $2200 total plus fees at auction in ordered 3 more dump units for other horse owners who loved mine
These are amazing especially when you have zero turning radius better than a bobcat in our barn for cleaning the lane ways from the cows
The auction place near me sells a lot of these new for around $3K and they seem to be much faster and stronger than the one you got. I think they are branded as AGM. Difference in manufacturers or maybe a problem with the one you got. Check fluids and adjustments, that may be the problem.
Brad, why is so important to you to razz your dad so much for just trying to save a few bucks? I love watching you two but damn, cut the guy some slack. We're not all as smart as you.
His dad does it right back to him
No respect!
Honestly I believe his dad is his best friend. They bust each others balls for RUclips. I admire their relationship 😇
To make content.
It’s for content 😂
360 vs 1000 is not a direct comparison. Dingo makes a smaller version that would be comparable. I have a 360 I use to power and pull around a vibratory plow. The thing works great and will fit through narrow gates and in small spaces.
Thanks for the heads up. What a good lesson for all your viewers. Be careful what you buy.
Arguing with dad. Dad with shovel. Not a smart move. lol
Love the video guys much love and respect thanks for sharing ❤❤❤
Dang ease up on pops wow you giving him a lot of heck 😂😂
You never can let your dad be happy so get out of here with this BS
His dad is a fool. Sounds kinda like you.
@bradnerling7156 your a fool n a 🤡
I got a compact tractor and it won't even do that with grass I would say the bucket is not right for it anytime I've took out grass I've always used a tiller on the back of my tractor and then scoop it out with the bucket I don't think it's a bad machine and the other machine you went and got looks a lot heavier and a lot better built and it has the bucket for digging
Change ALL the fluids right away and replace with good oil. tighten the bolts. they are slow. ya can throw tracks n the track drive bearings may go. as far as digging... ya need a toothed bucket. they are decent for what they are.
The dingo was slow as molasses. You guys need to do another co-part build. Keep up the excellent videos.
You can buy from China for $5k, or buy a Toro for $50k or rent one for $500/day. Honestly, looks like rentals win!
The maximum amount you can buy is $1000. If you want to buy a Chinese product that can be used normally, such as Wilbert's machine, you need to buy a product for at least $5000. Generally speaking, buying a product for $10000 is very reliable. You can use the average price of your $20000 machine as a budget to purchase similar products from China. The last sentence is, don't be greedy for cheap things.
MY POST LOTTO DREAM involves ''investing'' into a hydrolic/machine shop that ends up making a new pump/diverter valve sets that make them overseas el cheepo loader thingies, MUCH much better ....
That is really sad as there use to be several pool table makers here in the past that made some of the highest quality tables you can buy.
I have an agt industrial mini excavator from China it walked slow, but I turned up the pump, and that booger will dig some holes. So you may have to turn up the pump pressure, so it will dig
There using one of the smallest units they have probably 13hp. They have a twin 22hp and I've seem some are made in china with a kubota and/ or perkins diesel.
I think it could lift if the hydraulic pressure turned up and add weight to the front of the tractor(front of tractor behind the bucket.
President dose not make the prices😂😂but ok
The Temu Dingo would be good for snow removal. Not much more than that.
The mini excavator from temu is actually ok but you definitely need to get the thumb drive that they offer with them,to do any good work
Your definition of a tractor is crazy work
The HP difference in both machines will give you your answer as to why one works better than the other
Your Dad is overpowered 😂😂😂😂😂😂😂😂😂
Buy what you want it's your money don't worry about what nobody else is saying
Everybody sees them and contemplates buying one to try, these and the tiny excavators.....Happy he put in the money and work to test out the theory 🤣. Really name brand units are pretty stout 👍😁
Channels so underrated
Awesome job guys.
I wish I had that China one
As always great content guys 👏.
Almost everything is made in China refrigerator behind you
Even when the old man loses, 😅he finds a way to win
Plow SNOW with it 😂😂😂😂😂😂
That's not a tractor that is a stand on mini skid steer so the tidal is a little click batty
Anyone on here said they bought one an loved it they still live with parent’s
I hope there isn't only peanut oil in the engine for shipping purposes.
Brilliant Tractor, my boss bought a real cheap 25 hp Chinese tractor it was made from Mickey Mouse steel it lasted a year with a break down every week, its in the uk. ..
I had the same problem the first time i used a log loader, I was thinking this thing is slow and weak. Then one of the regular operators told me to idle it up and i was suddenly like superman on caffeine loading logs.
I have ocean front property in Iowa if your dad is interested, got a good price on it and move in ready!
There has to be a way to speed that up...its in crawl mode...like for babies! Im sure it has a man switch somewhere...then change all the valves, reinforce all the steel with 3/16" plate, powdercoat ...then maybe the motor needs a big bore kit and whammo...its good to go! I will buy it! Its a great project semi-dingo! lol
Props to Doug for taking your constant digs
Hahaha
Just the difference in the sound of the motor tells you everything..
Did you guys check any of the fluids, as China tends to send a lot of these things dry or very low after testing them. If you didn't check, you might have destroyed it.
guess you could call your dad mini me haha
Thing is about those chinavator and loader so many differences between them some are ok some are horrible. Watched video guy had one hated it bought another one different manufacturer worked great for him. But when i bought my u10 kubota looked at chinavator first im in it for the long haul not 5 minutes
Moral to the story is. Try before you buy
China videos do make for some fun content. I say keep it going and see what other crazy things you guys can get.
Palm trees will freeze bc they are mostly just strings of roots, so water just sits everywhere. I was looking at that alibaba tractor for a few days and I'm glad I seen your video to not purchase one. They make it look so damn good on the commercial. But China does have only some good tractors but larger ones.
Bro do NOT buy it!!! Haha glad you saw this
NEGATIVE NANCY .
I’ve been looking at the big caravans on Alibaba 😮 glad I watched this
Try sharpening the bucket edge
This little tractors made for one thing and one thing only, mucking out stalls, cleaning up the turds, moving. gravel. It's not made for long distance travel. It's one thing and one thing only for three grand what a deal
I think we found that out after the fact 😂
@@DeBerti Your dad needs to listen to you, bro
Theirs a saying “buy once cry once” spend the extra and buy something that really works
OK, that’s not a tractor. It’s called a mini skid steer for one.
i live in the mid west were its cold. i doubt it push the snow.
Usually it's the other way around, the son is trying to justify his quirky online purchases to his dad.. and force the dad to like it and jump the bandwagon 🤣
Don't be cheap. Buy a more expensive one from China. It's just as good as the "American" one but costs much less.
Do u still have the trenz super duty that had the mattrax that was on monster garage that thing was awesome Brad was very young then
Put a better pump and motor in it, it'll still be much cheaper till it falls apart. 😂
First thing I would do is add a seat.
I have the 380 version of this with the 26hp motor and it works really well still not super fast but it can actually dig lol.
Use it on the pool table to clean the felt.
Did it come in the crate with all the dirt on the tracks
Did anyone bother to check fluids before putting the machine to work ?
You need to include the fact that you’re comparing it to a 45k dollar machine.
😂 The machine was not set up and adjusted . Who bought it got a steal .
I’m wanting to buy the Truck bumper drawer just the drawer I’m put it on my Chevy can you please tell me where I can get it please please
You bought the wrong one. This isn't how most of the China imported mini skid loaders work. Most are faster, have large number of attachments, and work very well. That bucket you have doesn't have a cutting edge on it. Add a cutting edge and for really hard earth bucket teeth.
What about parts with any of the Chinese vehicles?
I think a lot of these are tempted because people seem to want 50-75% of new for 30 year old beat to crap machines, at least in my area.
Damn it man quit trying to prove your dad wrong
Storage unit zinger at the end 🤣
I must have missed something, I didn't see anyone pull anything. It looked more like a key turn to me and it started.
I bet if ya put a bigger cylinder on the bucket and a higher volume hydraulic pump you’d prolly be able to do something with that thing
I would take it apart and turn the hydraulic system into something on a lawnmower and change the bucket and a few other things.
Your dad should probably try using it on reverse.... probably it will be faster and stronger that way 😅😅😅
After running them for more then 20 years, Toro is the last one i would pick to use. Bobcat or Ditch Witch are far better overall machines.
That machine would have worked with a little time invested, I have watched videos on a bunch of those Chinese machines and they all work after a little tinkering. Like if you would have sharpened the cutting edge and stuff like that.
Can see that your dad bought a toy, not a industrial machine 😂
That’s not a tractor. It’s called a mini skid steer.
How are the trackes so dirty after unwrapping it.
I think to a homeowner that's got like 5 acres and has an acre garden or two acres garden. It might work just fine. But in a hands of a professional you really need professional equipment to get the job done efficiently to make your money
Your dad might be a little cheap but have to love it
You should buy a storage shed in china 😂😂😂😂😂
Easy bro😂😂😂
That thing fired up 1st pull.
Bro he turned the key
Good chilly evening yall
Did China use Vaseline?😂😂😂
Hahahaha