How To Build a Double Deep Firewood Storage Rack - Free Plans
HTML-код
- Опубликовано: 10 сен 2020
- Visit Jonathan Green at www.jonathangreen.com/?...
Free Design Plans: jonpeters.com/build-a-double-...
I built the log rack out of treated lumber. The main frame that supports the logs is made from 2 x 6's. The posts are 4 x 4s and connected to the frame with lap joints. After getting the rack into position and adding a 4 x 4 posts at the ends, I used a 2 x 6 at each outer edge and a 2 x 10 in the center to hold the logs . The idea for this design is the logs will spend the gap with a small space between the two rows And be suspended a little more than a foot off the ground. This will allow for airflow and keep the wood dry. I decided not to use a roof on this design but one could easily be added if you decide to. if you build this project please post it on Instagram and hashtag #longviewwoodworking
Thanks to CMT saw blades for supporting this project: www.cmtorangetools.com/na-en/
Design Plans: jonpeters.com/design-plans/
My Tools imp.i284638.net/Jon-Peters-Ac...
Merchandise: jonpeters.com/store/
Instagram: / jonpeters_
Facebook: / 312021729836
Website: jonpeters.com/
Support This Channel On PATREON: / jonpeters
Makers Mob Woodworking School: www.joinmakersmob.com/jon-pet...
Subscribe to my other RUclips Channels:
Jon Peters Shop Talk: / jonpetersartchannel
Make It In Vermont: / @makeitinvermont6627
Two River TV: / @tworivertv3566
Apparel: Mountain Khakis
www.mountainkhakis.com/
Rugged. Authentic. Reliable. Timeless.
#DIY, #woodworking,#homeimprovement 
Хобби
If you like heavy and expensive firewood racks these are perfect.
Nothing says strength and longevity like a notched-in post. 👌🏻👍🏻
You do a great job not teaching gimmicky things
Great video Jon! I need to make me one of those. The only difference is that I would need it covered in order to keep the wood dry. Guess I will have to figure that out. Thanks for the free plans....👍👍😉😉
A real essential work.Thank you for the plans !!!
@Jon Peters Your lawn does indeed look good...appreciate it everytime I roll by on bike heading home from the trails. Hope to see you on the trails again! Just converted to Jonathan Green this year---Love Your Soil; Mag i Cal; Black Beauty Original; and Green Up for seeding and sodding. Love the 4ft root depth for the grass...can't wait. Hope all is well bro.
Looks stronger than the metal tube one I bought at a home center!! Ha ha! Thanks Jon. Gotta go seed my lawn now.
Thank you for this video and your hard work to design this log rack. I’m putting a prairie in my yard in Wisconsin, cutting down an ash tree and splitting all the logs for winter burning. We will be making your log rack this week.
My dad always made these out of old pallets and they did the trick my whole childhood even though he had to build a new one every fall when we stacked firewood
Great job Jon, Stay Safe and have a nice day !!! .
Love it!! Fun watching you work.
Best workshop I’ve seen wow. Would love that 😮
Awesome tutorial. Thanks Jon.
Using the square as a fence for the circular saw is a great idea that I’ll definitely be using going forward!
See Larry Haun do it with bare hands ruclips.net/video/yh6cMQnWGwA/видео.html
Great design. And I guess you have a good sponsor here, because I am weirdly looking forward to that lawn maintenance video.
Great log stand I think I will make one of these.
Hey, that came out great and just in time for the upcoming months. Thanks, nice video!
Great instruction! Thank you.
Awesome work Jon! 😃👍🏻👊🏻
Enjoyed the video, rack looks great
Nice saw. Still waitin on the bosch👍
Nice and simple...(yeah right...lol) I really like it. Nice design Jon.
Very nice. Wish I saw this before I bought and cut all my wood today 🤔
Nice log rack Jon, but in the UK 🇬🇧 we would need a roof over it! Nice lawn by the way. 👍🏼
Even though it's pressure treated, I'd added a water sealer to it.
Looks great.
I do need to plant some grass at the house someday.. the shade seed would probably be good too. Our yard gets very little sunshine.
The best thing about Jonathan Green is they spell Jonathan correctly...
The very best think about Jonathan Green is: the green.
man, that Milwaukee impact driver is impressive.
Great video, I burn wood for heat so I am looking forward to building your double deep wood rack. Have you put together a shopping list for the
Materials that will be needed. Thanks and keep up the good work..
Hi all, Free Plans for this project are available here: jonpeters.com/build-a-double-sided-log-rack/ Have a great weekend! Jon
Jon-I love this log rack and I am building my own this morning using your plans. However, unless I am reading it wrong, the list of lumber seems to omit the two 12-ft 2x6 pieces used on the frame itself.
Hello again Jon. You said there were free plans. Where do I find the plans? I have looked high, low and in the middle and have not found them. I am looking forward to starting the project!!
Great video thanks🇨🇦
OK Jon, I went out to Brock Farm and picked up a 50lb bag of Black Beauty Original. We had to start from Dirt because the septic was changed out. We added Love Your Soil because we have a little clay.
We needed something and your Sponcer supplied the perfect choice.
I didn't know that Jonathan Green was over here in Farmingdale, NJ
You can also go to Twin Pond Farms on Route 9 in Howell.
Way too complicated, so many easier builds. You do excellent work you are a craftsman and I do appreciate your skill.
So post an easier build with the same size?
How far into the board are you driving your screws?
Is there a recommended depth?
Edit: after some research most if not all say to drive the screw either flush Or 1/6” below the surface of the wood.
Are you aware of anything different or are you ‘In the Zone’ and doing your man thing? (I do this as well until I catch myself)
Edit #2 - I have added a roof on my three rakes. The wood stays dry and bakes in the heat.
Love you design!
I was wondering the same thing, he seems to be driving these screws almost all the way through...
yeah... most of his screws aren't holding much. Flush or just under surface is your goal. This video shows what happens when you have a fresh battery on your impact drill blasting screws into wood lol.
Good my engineer
Cheers!!
I'm curious why you drive the screws so deep. Doesn't that weaken the holding power?
Looks great, have any trouble finding green treated lumber in your area?
Like one of those 🕊🇬🇧
Great property. How many acres do you have john ?
Bro., I mean who da hell doesn't love a big ass pile of split wood to burn. The rack is simple, effective & just enough design element to separate it from just being defined as a bunch of dimensional lumber screwed together... Hoping all is well Bud, Dirty Jersey out!!
Does the firewood need to be covered?
as another Jon once said "Winter is coming" :)
Hi Jon another great video, you mentioned the logs now are off the ground and drying out, what if it rains? Are you going to put a roof type covering over the logs in case it rains? Thanks Jon
This is something I have been wondering too, is a roof needed against snow or rain? Thanks for clarifying @Jon
It is not an issue if it rains or snows. The impotant part is, that the logs are off the ground because otherwise they would rott really quickly.
It depends somewhat on the climate. But the curing of green firewood is something that happens at a cellular level in the wood. Even wood left out in the rain will cure (dry out internally) over time. Maybe in a true rainforest climate it wouldn't dry. But where I live it is possible to season firewood without a cover. I do transfer it to a covered rack near the house before I actually burn it, though. Even though the internal moisture is gone, it is hard to get a fire started with logs that are wet on the outside. Once it is going, wet logs will steam off and burn just fine as long as they are just wet on the outside. Burning green firewood is pretty difficult and often the fire just doesn't seem to get going. But you can have a good fire with cured firewood that is just wet on the outside, once you get it started.
@@tomjefferson5431 I disagree. I have left wood stacked and uncovered and it grows mould in between where the wood contacts other pieces. If covered this would not be significant and would dry out, but my experience is that it must be covered (at least where I live).
@@SamRaimi34 nah
Question: Why use deck screws, which have no structural strength, and then add lag bolts later? Why not just ust GRK structural screws and be done with it? No drilling and bolting needed.
Screwing in those deck screws, they go in more than half way. Do they still provide enough power to hold it together long term?
Jon is just overdriving those screws a bit--probably a bit more than the manufacturer recommends.
@@kenc2257 Does Jon need to use pilot holes when using an impact driver? Maybe the screws are going in too easy. I've seen other videos with no pilot holes used.
I admire your craftsmanship. This is one solid rack!. I would have taken it one step further. The legs touching the ground would benefit greatly if they had been placed on top of a 12"x12" concrete "stepping stone". I'm only talking about an added $20 to an already ridiculously priced rack. Just my $.02...
Your free plans show cutting the 2x6x12 down to 11’ .... is this right?
GR8
Very nice, Jon. Is there a reason that you didn't use PT for the entire rack?
It all looks pt to me. The darker color and prominent darkish grain. He prolly just skipped mentioning it all was.
That lumber can't be from a big box store...its too dry and too straight. :)
With this amount of work and detail one might think he is building a deck off the house….I know the wood that is stored there will be happy.
Jon do you live by a forest or by a lake ? Seems like a huge property lol
Looks great except for driving the screws half way through the lumber lol
This is like a $400 wood rack. Super nice, but as stated earlier, wayyy too complicated. If it's that complex, it should have some cross bars to support a tarp or tin as a weather guard.
I need something like that, but with a roof - how much does that one hold?
Stacked to the top of the side supports with no gap between stacks,. it will hold about 155 cubic feet or 1.2 cords of wood. So, subtract a little for gap and not stacking all the way to the top, it should hold around a cord of wood.
@@AppalachianLife thanks!
Obviously it never rains there
Random question, what shoes are you wearing in this video?
Lacrosse... great slip on’s that will keep your feet dry.
OMG, nothing personal but can anyone say overkill! What are you stacking on this, gold? lol 😂 looks solid
You didn’t mention what length deck screws you used. Did I hear you say 3”?
Yes, he said 3”
That wasn't an echo... [Jon may have mentioned the 3" deck screws once or twice...]
Nice vid but way overkill with the lags due to the knock outs
How come no roof? I bet with support from top, you wouldn't have to you such a heavy pieces of wood in the ends. Looks like a bit too much as most of the weight is going down and only some to the sides.
I would be afraid that termites would eat it up
Looks great, except I'll need a roof over it to keep rain and snow off the wood.
Thanks, yes I think a roof could be added to this design… maybe a support in the center.
I got all the way to 7:30 and then he mentions using the table saw. I need to build a firewood shed and I don't have a table saw. I wish there were a way around that without trying to rip a 2x4 with a circular saw.
I think you can make those rips with a Circular saw
@@JonPetersArtHome Thanks. Seems like a long length, though. I'd have to be really careful about keeping the wood stable and the saw steady. I'm always careful with power tools, but this goes into super-cautious territory.
In police state Switzerland you need to ask the authorities for permission (permits) if you wanted to build this on “your” property.
Needs a roof. Better protection and would look better.
Today’s wood prices that’s about 1000$
Home Depot now charges the cost of an arm for that much lumber!
Better add a leg to the tally also.
NICE JOB, IN 2022 THIS WOULD COST YOU $500 FOR MATERAILS, WELL BUILT
No roof?
Not to hard to figure out if you want to add one
Wow, a tad overkill with joinery, lag-bolts, screws, 2x6’s and 4x4 legs. Don’t get me wrong it’s very nice, but that’s a very pricey way wood storage. When one could just use 4 cinder blocks and a few 2x4’s and get the same outcome. Why not add a roof too since you’re going all out. Nice project tho.
Go weigh a cord of wood when it’s wet/snow and see how your spaghetti noodle 2x4 one is going to hold up.😂😂.
Seems to me that they’ll get wet when it rains and then it’s “wait till they get dry again”.
That's not really how wood dries. The reason to dry or season firewood is to dry out the inside of the log/piece. If you've ever seen rain on a wood deck, the superficial water or water left on the surface evaporates really quickly and the board itself isn't sopping wet.
If it's recently rained, then starting a fire with damp wood isn't easy but throwing some onto an already burning fire wouldn't really affect it.
Yes I agree with Andy. Green cut wood may be something like 70 percent moisture by weight. If you leave it out in the elements (but off the ground) to cure it will still dry out to 30 or even less percent moisture by weight. I mean, I am not sure if you can do that in a rainforest or whatever. But in many places it will cure (internally dry out) even if it gets rained on.
Really? Not for the money, but I use cylinder blocks and fresh trees for the outsides and the bottom, total cost $5. no tools needed, solid as a rock.
Sounds good 👍
Check your email just sent you some SketchUp drawings. I need build 3 of these.
Step One: Take out a second mortgage just so you can afford to buy lumber (at these crazy 2020 prices) !
Agree, I was going to start a shop build project on my property a few months ago, but I'm putting it off for now because of covid lumber prices. 4x4x12 treated are $30 now!
Not you too Jon Peters. Is it a trend for RUclips Woodworkers to misuse the word EITHER? 6:02 and 6:32. The word EITHER is used when you're referring to one or the other. Key word OR. In your case and like so many others, it should have been BOTH sides. Or EACH side. Sorry about the comment but i just had to get that out there. Other than my little pet peave, I've always enjoyed your videos and have been a subscriber for a few years already. Keep up the good work and great content.
U must be a blast at parties
@@epicone1986 Thanks!!!
I also assume you get punched a lot ;)
@@epicone1986 NOPE!!!😂
"Peeve"