PAANO GUMAWA NG PANGHALO NG TILE ADHESIVE MULA SA METAL SCRAPS. (Paddle Mixer Made from Scrap Metal)
HTML-код
- Опубликовано: 22 сен 2019
- This DIY Paddle Mixer is made is entirely from scrap materials/excess cuttings from my previous DIY Projects. (Ang DIY Paddle Mixer na ito ay gawa mula sa mga scrap na materyales at naisip ko itong gawin para gamitin ko sa paghalo ng Tile Cement. Mas madali itong gamitin kesa mano-manong paghalo. HIndi masakit sa kamay at nakakasigurado pa na nahahalong mabuti ang adhesive.)
ayos to
Salamat po.
De que medida es el tubular y el tipo de corte
@marco antonio aquino lazaro. Thank you for asking. It's 1 inch by 2 inches by 2mm thickness. Cut by 1 inch with an angle of 45 degrees. Attached together by welding forming a cross/propeller. Then hammered to shape it like a spiral. When I satisfied with the shape, I welded a 12mm square bar at the center with used/damaged drill bit spindle on the other end of the square bar. The tubular I used were just an excess cut from from my other DIY Projects. Instead of throwing them away, I turned it into other useful things like this one.
sobrang lakas ng apirahe ng welding niyo po para sa ganun ka nipis na bakal
Sir saan po location ninyo ? Gusto kong magpagawa ng ganyan sa inyo po
Thank you po. Sa ngayon po kasi ay di pa ako makapagfocus sa paggawa. May inaasikaso pa po ako iba business at construction. Pag po cguro maluwag na skedyul ko.
Pa subcribe lodi